• Journal of Auto-vehicle Safety Association
• /
• v.6 no.1
• /
• pp.16-21
• /
• 2014

Recently Korea and many countries are legislated for pedestrian protection as following the GTR(Global Technical Regulation). Most NCAP organization have been applying pedestrian protection results in their own rating system in individual or overall rating. Euro NCAP agency has been introduced it first. From the beginning, Euro NCAP had assessed occupant and pedestrian protection. It has become to strengthen a pedestrian protection protocol every time published. Korea NCAP also has been rating pedestrian protection with overall rating system. This paper proposed to study new pedestrian protection protocol especially upper leg in order to find injury response based on physical test. On Euro NCAP, the upper leg injury are assessed two kind of value which are bending moment and force.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.4
• /
• pp.579-586
• /
• 2017

The defense industry has become a global industry, and military technology is actively being traded between countries to increase their military capabilities. The Republic of Korea has been ranked one of the top 10 countries for exports of military technology. To maintain competitive advantages in the global defense industry, it is essential to protect key technologies employed by exported weapon systems. Various techniques have been developed for protection of confidential technologies in weapon systems, and the U.S. DoD has been leading the development of the protection techniques. This paper reviews current anti-tampering techniques that prevent leakage of key technology from weapon exportation or pillage. Based on the protection techniques employed by the U.S. DoD Anti-Tamper Executive Agent, this paper suggests novel design methods for protection of confidential technologies. The proposed design methods were tested on an actual weapon system.

• KIEE International Transactions on Power Engineering
• /
• v.2A no.3
• /
• pp.89-94
• /
• 2002

In this paper, a protection system using a Multi-Agent concept for power distribution networks is proposed. Every digital over current relay(OCR) is developed as an agent by adding its own intelligence, self-tuning and communication ability. The main advantage of the Multi-Agent concept is that a group of agents work together to achieve a global goal which is beyond the ability of each individual agent. In order to cope with frequent changes in the network operation condition and faults, an OCR agent, suggested in this paper, is able to detect a fault or a change in the network and find its optimal parameters for protection in an autonomous manner considering information of the whole network obtained by communication between other agents. Through this kind of coordination and information exchanges, not only a local but also a global protective scheme is completed. Simulations in a simple distribution network show the effectiveness of the suggested protection system.

• Journal of Radiation Protection and Research
• /
• v.46 no.1
• /
• pp.32-34
• /
• 2021

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.3
• /
• pp.306-314
• /
• 2012

This paper proposes a new system to maximize efficiency of Air Base Protection Operations through the development of location identification software. The Wibro-based location identification system for Air Base Protection Force offers Blue Ground Force digitalized character message which is not exposed to enemy. Also, it is possible to automatically provide the location of Blue Ground Force to Air Base Ground Operations Center. The test result proves that this system is very helpful when Air Base Protection Force executes Air Base Protection Operations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.208-213
• /
• 2011

This paper analyzes potential interference effects of Ultra Wide Band(UWB) on Global Positioning System(GPS) which is providing safety service. For the interference analysis, positioning error method is used to determine the minimum protection distance to meet positioning error of 2.5 m below and Minimum Coupling Loss(MCL) method is used to determine the required protection ratio(I/N) from the protection distance of UWB transmitter and GPS receiver to meet positioning error of 2.5 m below. In a result, the minimum protection distance to meet positioning error of 2.5 m below was about 10 m and the protection ratio to meet positioning error 2.5 m below was -20 dB. The protection ratio proposed in this paper is the same value of the protection ratio of safety service proposed by ITU-R. The obtained protection ratio can be used for the protection standard of domestic GPS system for the safe of life service.

• Transactions of the Korean hydrogen and new energy society
• /
• v.21 no.3
• /
• pp.167-183
• /
• 2010

This paper analyzes the backgrounds of the standards for protection against electric shock in Global Technical Regulations (GTR) of Fuel Cell Vehicle (FCV). Targets on research were high voltage criteria, safety current, isolation and grounding resistance, time limitation, energy, adequate clearance, and test procedure. Based on human impedance and effect of current in IEC 60479-1, safety of human was examined. Then, isolation and grounding circuit model of FCV were analyzed theoretically. The results give several suggestions: touch voltage less than 25V, AC energy less than 0.0813J, separation considering middle finger length, grounding resistance less than $0.2\Omega$, maximum AC ground voltage of 1V (rms), and isolation resistance between earth and electrical chassis. In MATLAB/Simulink environment, error characteristics of isolation resistance measurement procedure using internal DC sources were analyzed under variations of internal resistance of voltmeter and isolation resistance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3A
• /
• pp.296-301
• /
• 2011

GPS(Global Positioning System) service is more important than other wireless services. The GPS is necessary protected from any other interference signals. Therefore, GPS protection ratio was calculated on the basis of bit error rate(BER) in this paper. Simulation results show that the allowable maximum interference power is -190 dBm/Hz and the ratio of interference to noise(I/N) is -16 dB. The achieved protection ratio is available to be applied as the protection criteria of GPS in considering the implementation margin of 4 dB. As a result, the proposed protection ratio of GPS is expected to give standard for a stable GPS service.

• Journal of Information Technology Applications and Management
• /
• v.14 no.3
• /
• pp.151-168
• /
• 2007

RFID is an emerging technology and rapidly applied to various industries due to its high-tech characteristic and convenience. Although RFID provides valuable benefits. it might also generate serious privacy problems. Previous studies show that privacy issues should be incorporated in developing RFID systems and more detailed privacy protection methods. However. they just provide basic concept, rough guideline. and simple architecture about RFID privacy protection. Industry needs more structured framework and detailed systematic process to incorporate privacy issues into the RFID system. The purpose of this paper is to develop a framework and detailed process design of RFID privacy protection issues in retail industries. A framework is developed based on individual sensitivity concept, RFID contents, and interface with EPC global standard. Case study is applied to validate the framework and it turns out to be useful. It is expected that the proposed framework and process design would provide more systematic guide lines to solving RFID privacy problems.

• Fashion & Textile Research Journal
• /
• v.24 no.2
• /
• pp.206-216
• /
• 2022

This study sought to examine the sustainability criteria found in the global sourcing practices of global fashion retailers. Sustainable supply chain management, with a particular focus on the sustainability criteria of global sourcing, was analyzed. This qualitative study was based on a focus group interview and corporate social responsibility (CSR) annual reports. Eight master categories, 18 middle categories, and 37 bottom categories were extracted. The key categories and their middle categories were as follows: (1) Social compliance (working conditions, employment, safety); (2) Environment concerns (environmental pollution management, eco-friendly production, supply chain environment); (3) Energy efficiency (energy saving program, store environment); (4) Consumer protection (restricted substances management, consumer product safety improvement); (5) Management system (code of conduct, triangle audit system); (6) Community social activities (local community service, voluntary activities, charitable activities); (7) External stakeholder engagement (media & non-governmental organization management, maintenance of relationship with local authority); (8) Brand protection (respect for companies' intellectual property). The findings of this study offer academically significant insights into the sustainability criteria that can be encountered by companies under diverse global sourcing scenarios, revealing that global sourcing by fashion retailers is not merely a means of reducing costs, but a way of generating new jobs and making a social contribution to developing countries. The study's findings also have practical significance, offering guidelines for general CSR activities in the global sourcing process.