• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.9
• /
• pp.1846-1855
• /
• 2015

In this paper, a precise relative positioning with TD(time differenced) carrier phase measurements from a low-cost GNSS(Global Navigation Satellite System) receiver is proposed and analysed. The proposed method is using carrier phase measurement from a single GNSS receiver that reference receiver is not required and stand alone positioning is possible. TD operation removes the troublesome integer ambiguity resolution problem, and if the time interval is short, other error, such as, ionospheric, tropospheric delay and ephemeris error are effectively eliminated. The error analysis of the proposed method shows that a precise and positioning with carrier phase is possible. The implemented system is evaluated using a real car experiments. The results show that the horizontal positioning error was less than 3m during 10 minutes experiments, which is 4 times more precise than the results of normal code based absolute positioning.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.10
• /
• pp.52-60
• /
• 2010

It is generally important to get a precise position information for autonomous unmanned vehicle(AUV) to run safely. For getting the position of AUV, the GPS has been using to navigation in a vehicle. Though it is useful to finding a position, it is difficult to precisely control a trajectory of the AUV due to large measuring error which may reach over 10 meters. Therefore to apply AUV it needs to compensate for the error. This paper proposes a method to more precisely localize AUV using three low-cost differential global positioning systems (DGPS). The distance errors between each DGPS are minimized as using the least square method (LSM) and the Kalman filter to eliminate a Gaussian white noise. The selected DGPS is cheaper and easier to set up than the RTK-GPS. It is also more precise than the general GPS. The proposed method can compensate the relatively position error according to stationary and moving distance of the AUV. For evaluating the algorithm by simulation, the DGPS signal with the Gaussian white noise to any points is generated by the AR model and compared with the measurement signal. It is confirmed that the proposed method can effectively compensate the position error as comparing with the measurement signal. The compensated position signal can be used to localize and control the AUV in the road.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.4
• /
• pp.437-444
• /
• 2009

A bi-directional, multi-step numerical integrator is developed to determine the GPS (Global Positioning System) orbit based on a dynamic approach, which shows micrometer-level accuracy at GPS altitude. The acceleration due to the planets other than the Moon and the Sun is so small that it is replaced by the empirical forces in the Solar Radiation Pressure (SRP) model. The satellite orbit parameters are estimated with the least-squares adjustment method using both the integrated orbit and the published IGS (International GNSS Service) precise orbit. For this estimation procedure, the integration should be applied to the partial derivatives of the acceleration with respect to the unknown parameters as well as the acceleration itself. The accuracy of the satellite orbit is evaluated by the RMS (Root Mean Squares error) of the residuals calculated from the estimated orbit parameters. The overall RMS of orbit error during March 2009 was 5.2 mm, and there are no specific patterns in the absolute orbit error depending on the satellite types and the directions of coordinate frame. The SRP model used in this study includes only the direct and once-per-revolution terms. Therefore there is errant behavior regarding twice-per-revolution, which needs further investigation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.6
• /
• pp.350-356
• /
• 2014

In this paper, we design a local signal to improve a tracking performance of time-multiplexed binary offset carrier (TMBOC) signal, which was adopted in modernized global positioning systems (GPS). Specifically, considering that TMBOC signal includes BOC(6,1) components, we first obtain local signal by evenly dividing sub-carrier of TMBOC(6,1,4/33) by the period of a BOC(6,1) pulse. Finally, we remove side-peaks of TMBOC(6,1,4.33) autocorrelation via combination of partial correlations given from designed local signal and solve the ambiguity problem. From numerical results, when performing signal tracking using the designed local signal, we demonstrate that the improved tracking error standard deviation (TESD) performance is offered as compared its autocorrelation and the conventional correlation functions.

• Journal of Korea Port Economic Association
• /
• v.29 no.1
• /
• pp.67-76
• /
• 2013

It has been more than four years since the outbreak of global financial crisis. However, the world economy continues to be challenged with new crisis such as the European debt crisis and the fiscal cliff issue of the U.S. The global economic environment remains fragile and prone to further disappointment, although the balance of risks is now less skewed to the downside than it has been in recent years. It's no wonder that maritime business will be bearish since the global business affects the maritime business directly as well as indirectly. This paper, hence, aims to predict the Baltic Dry Index representing the shipping business using the ARIMA-type models and Hodrick-Prescott filtering technique. The monthly data cover the period January 2000 through January 2013. The out-of-sample forecasting performance is measured by three summary statistics: root mean squared percent error, mean absolute percent error and mean percent error. These forecasting performances are also compared with those of the random walk model. This study shows that the ARIMA models including Intervention-ARIMA have lower rmse than random walk model. This means that it's appropriate to forecast BDI using the ARIMA models. This paper predicts that the shipping market will be more bearish in 2013 than the year 2012. These pessimistic ex-ante forecasts are supported by the Hodrick-Prescott filtering technique.

• Atmosphere
• /
• v.26 no.1
• /
• pp.1-18
• /
• 2016

Eleven Tropical Cyclone (TC) intensity guidance models in the western North Pacific have been validated over 2008~2014 based on various analysis methods according to the lead time of forecast, year, month, intensity, rapid intensity change, track, and geographical area with an additional focus on TCs that influenced the Korean peninsula. From the evaluation using mean absolute error and correlation coefficients for maximum wind speed forecasts up to 72 h, we found that the Hurricane Weather Research and Forecasting model (HWRF) outperforms all others overall although the Global Forecast System (GFS), the Typhoon Ensemble Prediction System of Japan Meteorological Agency (TEPS), and the Korean version of Weather and Weather Research and Forecasting model (KWRF) also shows a good performance in some lead times of forecast. In particular, HWRF shows the highest performance in predicting the intensity of strong TCs above Category 3, which may be attributed to its highest spatial resolution (~3 km). The Navy Operational Global Prediction Model (NOGAPS) and GFS were the most improved model during 2008~2014. For initial intensity error, two Japanese models, Japan Meteorological Agency Global Spectral Model (JGSM) and TEPS, had the smallest error. In track forecast, the European Centre for Medium-Range Weather Forecasts (ECMWF) and recent GFS model outperformed others. The present results has significant implications for providing basic information for operational forecasters as well as developing ensemble or consensus prediction systems.

• The KIPS Transactions:PartC
• /
• v.13C no.1 s.104
• /
• pp.95-102
• /
• 2006

Nowadays, GPS is used widely, especially in case which needs precise position information, such as car navigation systems and various kinds of position measuring instruments in an outdoor environment. According to their applications, there are many kinds of GPS receivers with different costs and error rates. The maximum error range of the general-purpose GPS receiver is within 30m, though the error rate depends on receiving rate of signal and weather condition. RTK(Real-Time Kinematic) and DGPS(Differential Global Positioning System) have more precise accuracy than the general-purpose GPS. However end users can't afford use them because of their high price and large size of equipments. In order for the end user to obtain precise position information, it is important that GPS receivers has portability and low price. In this study, we introduce a new system that offers precise position information using the DGPS mechanism satisfying low cost and portability.

• Journal of Theoretical and Applied Mechanics
• /
• v.3 no.1
• /
• pp.16-33
• /
• 2002

A concept of hierarchical modeling, the newest modeling technology. has been introduced early In 1990. This nu technology has a goat potential to advance the capabilities of current computational mechanics. A first step to Implement this concept is to construct hierarchical models, a family of mathematical models which are sequentially connected by a key parameter of the problem under consideration and have different levels in modeling accuracy, and to investigate characteristics In their numerical simulation aspects. Among representative model problems to explore this concept are elastic structures such as beam-, arch-. plate- and shell-like structures because the mechanical behavior through the thickness can be approximated with sequential accuracy by varying the order of thickness polynomials in the displacement or stress fields. But, in the numerical analysis of hierarchical models, two kinds of errors prevail: the modeling error and the numerical approximation errors. To ensure numerical simulation quality, an accurate estimation of these two errors Is definitely essential. Here, a local a posteriori error estimator for elastic structures with thin domain such as plate- and shell-like structures Is derived using element residuals and flux balancing technique. This method guarantees upper bounds for the global error, and also provides accurate local error Indicators for two types of errors, in the energy norm. Comparing to the classical error estimators using flux averaging technique, this shows considerably reliable and accurate effectivity indices. To illustrate the theoretical results and to verify the validity of the proposed error estimator, representative numerical examples are provided.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.10
• /
• pp.1483-1488
• /
• 2012

This paper analyzed the precision and accuracy of the altitude-aided GNSS using the altitude information from digital map. The precision of altitude-aided GNSS is analysed using the theoretically derived DOP. It is confirmed that the precision of altitude-aided GNSS is superior to the general 3D positioning method. It is also shown that the DOP of altitude-aided GNSS is independent of altitude bias error while the accuracy was influenced by the altitude bias error. Furthermore, it is shown that, since the altitude bias error influenced differently to each pseudorange measurement, the effect of the altitude bias error is more serious than clock bias error which does not influence position error at all. The results are evaluated by the simulation using the commercial RF simulator and GPS receiver. It confirmed that altitude-aided GNSS could improve not only precision but also accuracy if the altitude bias error are small. These results are expected to be easily applied for the performance improvement to the land and maritime applications.

• Korean Medical Education Review
• /
• v.21 no.1
• /
• pp.13-21
• /
• 2019

Patient safety and medical errors have emerged as global concerns and error disclosure has been established as standards of practice in many countries. Disclosure of medical errors to patients and their families is an important part of patient-centred medical care and is essential to maintaining trust. However, physicians still hesitate to disclose errors to patients despite their belief that errors should be disclosed. Multiple barriers such as fear of medical lawsuits and punishment, fear of damaging their professional reputation, and diminished patient trust inhibit error disclosure. These barriers as well as lack of training or education programs addressing error disclosure contribute to a low estimated disclosure rate in real situations. Nowadays, the importance of patient safety education including error disclosure is emphasized and related research is increasing. In this paper, we will discuss the background of medical error disclosure and studies on education programs related to error disclosure. In this regard, we will examine the content and methods currently being taught, discuss the effects or outcomes of such education programs and obstacles or difficulties in implementing them. Finally, the direction of future error disclosure education, support systems, and education strategies will also be covered.