• 융합정보논문지
• /
• 제11권2호
• /
• pp.82-89
• /
• 2021

본 연구의 목적은 투자자의 은퇴 시점뿐만 아니라 시장의 예측 변동성을 동시에 고려하여 Target Date Fund의 위험자산 편입 비율을 동적으로 조정하는 새로운 Glide Path를 제안하고, 은퇴 시점만 고려하여 위험자산 편입 비율이 정해지는 전통적 Glide Path와 투자 성과를 비교 분석하는 것이다. 시장 변동성의 예측치로는 역사적 변동성, 시계열모형인 GARCH 변동성, 그리고 변동성지수인 VKOSPI를 활용하였으며, 2003년부터 2020년까지의 분석 기간에서 변동성을 고려하는 새로운 동적 Glide Path의 투자 성과가 우수함을 보여주었다. 3가지 변동성 예측모형 모두에서 은퇴 시점만을 고려하는 Glide Path보다 수익률은 더 높고 위험은 더 낮아지면서 투자 성과 지표인 Sharpe Ratio가 개선되었다. 실증 분석 결과는 은퇴예정자뿐만 아니라 Target Date Fund 운용업계에 새로운 Glide Path의 활용 가능성을 제시하고 있다.

• 대한치과의사협회지
• /
• 제55권10호
• /
• pp.688-694
• /
• 2017

Objectives: This preliminary study compared the effects of glide path establishing instruments prior to substantial root canal preparation. Materials and Methods: Glide path was established by enlargement of the 2nd mesiobuccal root canal of Dentalike by using three kinds of glide path preparation nickel-titanium file; PathFile, One G and ProGlider. The pre- and post-instrumented Dentalikes were weighed in the resolution of 1 / 10mg. In addition, after glide path preparation, torque generated during shaping using the WavoOne file was measured. The data were analyzed by one-way ANOVA and Tukey post-hoc test at a significance level of 95%. Results: The ProGlider had the significantly larger amount of reduced weight than other instrument groups (p < 0.05). There was no significant difference between group of glide path preparation with ProGlider and without glide path preparation in maximum torque and total stress generation during the shaping with WaveOne. Conclusions: Glide path preparation instruments may have different efficiency according to their geometries. The Dentalike artificial teeth were revealed to have discrepancies in the size of root canals by microCT examination. It is impossible to make a meaningful judgment of the results due to the reliability or resolution problem of the root canal size of the artificial tooth selected as the standardized tooth.

• 구강회복응용과학지
• /
• 제28권3호
• /
• pp.245-252
• /
• 2012

본 실험은 왕복 회전 운동을 하는 단일 파일 시스템으로서 Reciproc과 WaveOne을 이용하였으며 glide path를 형성했을 때와 안 했을 때의 근관의 중심 변위율과 만곡도의 감소를 비교하여 새로운 단일 파일 시스템에서 glide path가 근관 성형 후 근관의 형태에 미치는 영향을 연구하였다. 총 40개의 모형 근관에 메틸렌블루 용액을 주입한 후 근관성형 전 이미지를 스캔 하였다. 네 개의 그룹으로 나누어졌으며 그룹 1은 PathFile (Dentsply Maillefer) #1, 2, 3 사용 후 R25 크기의 Reciproc 파일(VDW)을 사용하여 근관 성형하였다. 그룹 2는 PathFile 사용 없이 R25 크기의 Reciproc 파일을 사용하여 근관 성형하였다. 그룹 3은 PathFile #1, 2, 3 사용 후 Primary 크기의 WaveOne 파일 (Dentsply Maillerfer)을 이용하여 근관 성형하였다. 그룹 4는 PathFile 사용 없이 WaveOne 파일을 이용하여 근관 성형하였다. 파일은 모두 21 mm 길이를 사용했다. 각각의 파일을 위한 전기 모터로 Reciproc 파일은 VDW.SILVER motor (VDW), WaveOne 파일은 Waveone endo motor (Dentsply Maillefer)와 PathFile은 X-SMART (Dentsply Maillefer)를 사용하였다. 근관 성형을 마친 모형 근관을 다시 이미지 스캔 하였다. 성형 전, 후의 이미지를 Adobe Photoshop CS 3 (Adobe Systems Incorporated)을 이용하여 중첩하여 평가하였다. 중심 변위율은 Calhoun과 Montgomery에 의해 제안된 다음 공식을 사용하여 계산되었다:CR=|X1-X2|/Y. 실험 결과 근관의 만곡도가 감소하는 치근단 1, 2 mm level에서는 glide path의 형성에 따른 근관의 중심 변화율의 통계학적 유의성이 보이지 않았다. 근관 만곡 부위인 치근단 3, 4, 5 mm level에서는 glide path를 부여한 것이 통계학적으로 유의성 있게 낮은 중심 변위율을 보였다. 치근단 1 mm level에서는 Reciproc 파일이 유의성 있게 낮은 중심 변위율을 보였고, 치근단 1, 6 mm level을 제외한 모든 level에서 WaveOne 파일이 유의성 있게 낮은 중심 변위율을 보였다. 치근단 6 mm level에서는 Reciproc과 WaveOne의 차이는 관찰할 수 없었고 glide path를 형성한 그룹이 형성하지 않은 그룹에 비해 유의성 있게 낮은 중심 변위율을 보였다. 본 실험을 통해 만곡된 근관에서 근관 성형 전 glide path의 형성은 근관의 원래 형태를 유지하는데 필수적이며, 만곡된 근관에서는 WaveOne 파일 시스템의 선택이 근관의 원래 형태를 유지하는데 더 적절할 것으로 생각된다.

• Restorative Dentistry and Endodontics
• /
• 제37권4호
• /
• pp.215-219
• /
• 2012

Objectives: The purpose of this study was to investigate the screw-in effect and torque generation depending on the size of glide path during root canal preparation. Materials and Methods: Forty Endo-Training Blocks (REF A 0177, Dentsply Maillefer) were used. They were divided into 4 groups. For groups 1, 2, 3, and 4, the glide path was established with ISO #13 Path File (Dentsply Maillefer), #15 NiTi K-file NITIFLEX (Dentsply Maillefer), modified #16 Path File (equivalent to #18), and #20 NiTi K-file NITIFLEX, respectively. The screw-in force and resultant torque were measured using a custom-made experimental apparatus while canals were instrumented with ProTaper S1 (Dentsply Maillefer) at a constant speed of 300 rpm with an automated pecking motion. A statistical analysis was performed using one-way analysis of variance and the Duncan post hoc comparison test. Results: Group 4 showed lowest screw-in effect ($2.796{\pm}0.134$) among the groups (p < 0.05). Torque was inversely proportional to the glide path of each group. In #20 glide path group, the screw-in effect and torque decreased at the last 1 mm from the apical terminus. However, in the other groups, the decrease of the screw-in effect and torque did not occur in the last 1 mm from the apical terminus. Conclusions: The establishment of a larger glide path before NiTi rotary instrumentation appears to be appropriate for safely shaping the canal. It is recommended to establish #20 glide path with NiTi file when using ProTaper NiTi rotary instruments system safely.

• 한국항행학회논문지
• /
• 제15권6호
• /
• pp.994-999
• /
• 2011

본 논문에서는 기존 전자식 안테나분배장치(ADU)를 기계식 ADU로 개선한 사항을 설명한다. 기계식 ADU는 항공기가 착륙할 수 있도록 전파신호를 제공하는 활공각제공시설(Glide Path)의 신호를 안정화시켰으며, 장기간 사용 시 발생할 수 있는 위상변화 및 파워분배비율 변화의 문제점을 해결하였다. 그리고 개선된 ADU는 비행검사를 통해 안정성을 검증하였으며 현재 국내 외 공항에 설치되어 운영중이다.

• Restorative Dentistry and Endodontics
• /
• 제40권4호
• /
• pp.286-289
• /
• 2015

Objectives: The aim was to evaluate dentinal crack formation after root canal preparation with ProTaper Next system (PTN) with and without a glide path. Materials and Methods: Forty-five mesial roots of mandibular first molars were selected. Fifteen teeth were left unprepared and served as controls. The experimental groups consist of mesiobuccal and mesiolingual root canals of remaining 30 teeth, which were divided into 2 groups (n = 15): Group PG/PTN, glide path was created with ProGlider (PG) and then canals were shaped with PTN system; Group PTN, glide path was not prepared and canals were shaped with PTN system only. All roots were sectioned perpendicular to the long axis at 1, 2, 3, 4, 6, and 8 mm from the apex, and the sections were observed under a stereomicroscope. The presence/absence of cracks was recorded. Data were analyzed with chi-square tests with Yates correction. Results: There were no significant differences in crack formation between the PTN with and without glide path preparation. The incidence of cracks observed in PG/PTN and PTN groups was 17.8% and 28.9%, respectively. Conclusions: The creation of a glide path with ProGlider before ProTaper Next rotary system did not influence dentinal crack formation in root canals.

• Restorative Dentistry and Endodontics
• /
• 제45권2호
• /
• pp.22.1-22.10
• /
• 2020

Objectives: This study investigated the influence of glide path size and operating kinetics on the time to reach the working length and the fracture resistance of Twisted File (TF) and Endostar E3 files. Materials and Methods: A total of 120 mandibular single-rooted premolars were selected. Two methods of kinetic motion (TF adaptive and continuous rotary motion) and file systems (TF and Endostar E3) were employed. The files were used in root canals prepared to apical glide path sizes of 15, 20, and 25. The time taken to reach the working length and the number of canals used before the instrument deformed or fractured were noted. Fractured instruments were examined with scanning electron microscopy. Results: The TF system took significantly more time to reach the working length than the Endostar E3 system. Both systems required significantly more time to reach the working length at the size 15 glide path than at sizes 20 and 25. A greater number of TFs than Endostar E3 files exhibited deformation, and a higher incidence of instrument deformation was observed in adaptive than in continuous rotary motion; more deformation was also observed with the size 15 glide path. One TF was fractured while undergoing adaptive motion. Conclusions: No significant difference was observed between continuous rotary and adaptive motion. The TF system and adaptive motion were associated with a higher incidence of deformation and fracture. Apical glide path sizes of 20 and 25 required significantly less time to reach the working length than size 15.

• Restorative Dentistry and Endodontics
• /
• 제42권4호
• /
• pp.316-323
• /
• 2017

Objectives: This study compared the amount of apically extruded bacteria during the glide-path preparation by using multi-file and single-file glide-path establishing nickel-titanium (NiTi) rotary systems. Materials and Methods: Sixty mandibular first molar teeth were used to prepare the test apparatus. They were decoronated, blocked into glass vials, sterilized in ethylene oxide gas, infected with a pure culture of Enterococcus faecalis, randomly assigned to 5 experimental groups, and then prepared using manual stainless-steel files (group KF) and glide-path establishing NiTi rotary files (group PF with PathFiles, group GF with G-Files, group PG with ProGlider, and group OG with One G). At the end of canal preparation, 0.01 mL NaCl solution was taken from the experimental vials. The suspension was plated on brain heart infusion agar and colonies of bacteria were counted, and the results were given as number of colony-forming units (CFU). Results: The manual instrumentation technique tested in group KF extruded the highest number of bacteria compared to the other 4 groups (p < 0.05). The 4 groups using rotary glide-path establishing instruments extruded similar amounts of bacteria. Conclusions: All glide-path establishment instrument systems tested caused a measurable apical extrusion of bacteria. The manual glide-path preparation showed the highest number of bacteria extruded compared to the other NiTi glide-path establishing instruments.

• Restorative Dentistry and Endodontics
• /
• 제43권4호
• /
• pp.41.1-41.7
• /
• 2018

Objectives: The purpose of the present study was to compare the mean preparation times and frequency with which Reciproc and Reciproc Blue instruments reached the full working length in mandibular molars, with or without glide path preparation. Materials and Methods: Previously untreated mesiobuccal and mesiolingual canals with completely formed apices were randomly divided into 6 groups (n = 50) depending on the usage of Reciproc (RC; VDW), Reciproc Blue (RC Blue; VDW), C-Pilot (CP; VDW), and R-Pilot (RP; VDW) files: RC, RC Blue, RC + C-Pilot (RC-CP), RC-Blue + C-Pilot (RC Blue-CP), RC+R-Pilot (RC-RP), and RC Blue + R-Pilot (RC Blue-RP). A glide path was prepared using the hand-operated C-Pilot or the machine-operated R-Pilot instruments, respectively. The ${\chi}^2$ test, analysis of variance, and the Tukey post hoc test were used for statistical comparisons. Results: No statistically significant differences were observed in the distribution of the frequency of reaching the full working length in the RC (94%), RC Blue (88%), RC-CP (94%), RC Blue-CP (90%), RC-RP (96%), and RC Blue-RP (92%) groups (p > 0.05). Conclusions: Preparation of a glide path did not have a significant effect on reaching the full working length using these systems.

• Restorative Dentistry and Endodontics
• /
• 제40권1호
• /
• pp.85-90
• /
• 2015

This report introduces a novel technique that allows a safe and predictable canal negotiation, creation of a glide path and canal preparation with reciprocating nickeltitanium or stainless steel engine-driven instruments in canals where the use of rotary and the newly developed reciprocating instruments is contraindicated. In this novel technique, the instruments are used in reciprocating motion with very small angles. Hand files are not used regardless of the complexity of the canal anatomy. It also allows achieving predictable results in canal negotiation and glide path creation in challenging canals without the risk of instrument fracture.