• Textile Coloration and Finishing
• /
• v.23 no.1
• /
• pp.28-34
• /
• 2011

Deep coloration of cotton fabrics with concentrated Rhus verniciflua extract was carried out using large amount of Glauber's salt and a mordant in order to improve dyeability and functional properties such as deodorizing and antimicrobial activity. With increasing in the salt addition upto 80% in the dyeing liquor containing 0.45% extract concentration, K/S value and exhaustion increased threefold from 1.2 to 3.5, indicating that the salt reduced the electrostatic repulsion between the dyes and the cotton fibers. Also the concentrated extract solution to 8% can increase the color build up upto a K/S of 11.1. In addition the combined pre- and post-mordanting methods with potassium alum enhanced the dyeability upto a K/S of 22.2. The ammonia deodorizing property increased with increased color yield of the dyed fabrics. Also the dyed and post-mordanted fabrics with 8% extract concentration showed antimicrobial activity against both Klebsiella pneumoniae and Staphylococcus aureus.

• Textile Coloration and Finishing
• /
• v.22 no.4
• /
• pp.341-348
• /
• 2010

Sodium sulfate is commonly added in reactive dyebath in order to increase substantivity of the reactive dye to cellulose fiber by reducing repulsion between anionic dye and fiber. While sodium sulfate is mostly used in solid form, it is inconvenient to dissolve a large amount of powder sodium sulfate. Furthermore, if there is undissolved salt in dyebath it might cause unlevel dyeing. In this study, sodium sulfate in liquid or solid form was used in dyeing of cellulose fabric with reactive dyes of three primary color and the effect of type or amount of sodium sulfate on dyeing and fastness properties was investigated. When the amount of sodium sulfate rose to 30-50 g/l, K/S value of the dyed fabric markedly increased; further rise in sodium sulfate concentration resulted in slow increase in K/S value. For light color, optimum amount was about 30 g/l in solid form and 50-100 g/l in liquid form while, for medium to deep color, it was 50 g/l and 100-150 g/l in solid and liquid form, respectively. When using each optimum amount of salt in solid or liquid form for medium color, shape of dyeing curve as well as exhaustion was similar to each other. On the whole, similar color fastness results were obtained regardless of type or amount of sodium sulfate.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.89-89
• /
• 2011

Cellulose섬유의 염색시 섬유가 물속에 침지되면 섬유표면은 음전하가 형성되어, 용액 속에서 음이온으로 존재하는 염료와의 반발력으로 인해 염료가 섬유에 접근하기가 어려워지며 따라서 염색이 원활하게 이루어지지 않는다. 그러나 염욕에 염화나트륨(sodium chloride, NaCl)이나 망초 즉, 황산나트륨(Glauber's salt, sodium sulfate, Na2SO4)과 같은 전해질을 첨가하면, 양이온인 sodium 이온이 섬유표면과 음이온 염료사이의 반발력을 감소시킨다. 따라서 음이온의 염료는 섬유표면에 접근할 수 있고, 고유한 인력으로 염색이 가능하게 된다. 현재 Cellulose섬유의 상업적인 반응성염료 염색공정뿐만 아니라 최근 연구에서는 전해질 중 대부분 분말망초를 대부분 사용하고 있다. 그러나 분말망초는 별도의 용해과정이 필요할 뿐 아니라, 과량 사용시 용해되지 않은 분말이 섬유 표면에 흡착될 경우 불균염을 초래할 우려 등의 단점이 있다. 이와 같이 작업효율성을 향상시키고 염색을 효율적으로 진행시키기 위해 최근 액상형의 망초가 도입되고 있다. 이 연구에서는 분말 및 액상 망초를 조제로 사용하여 3종류의 Cellulose섬유를 반응성염료로 염색하였다. 담색, 중색, 농색 3가지 염료 농도에 대해 투입하는 망초의 type에 따라 각각의 Cellulose섬유별 균염성 정도에 대하여 비교해 보았다.

• Resources Recycling
• /
• v.30 no.1
• /
• pp.35-43
• /
• 2021

In this study, Na2SO4 and KCl reagents were used to synthesize K2SO4 as a basic study for recycling byproducts generated during the manufacture of steel and cement. The mole ratio of Na2SO4 to KCl, the saturation of the solution, and the stirring temperature were controlled to derive the optimal manufacturing conditions. The microstructure and crystallinity of the materials prepared were evaluated using scanning electron microscopy and X-ray diffraction analysis. Pure K2SO4 was obtained when the mole ratio of Na2SO4 to KCl was 1:6-18, the saturation of the solution was less than 160%, and the stirring temperature was 20℃, 50℃. The optimal manufacturing conditions to maximize the crystallinity and yield of K2SO4 while minimizing the energy consumption were 1:6 mole ratio of Na2SO4 to KCl, 140% saturation of the solution, and 20℃ stirring temperature.