• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.756-761
• /
• 1999

The objective of this study is to develop finite element analysis technique to predict the strength reduction of deteriorated reinforced concrete beams and their strengthening capacity. In order to consider the effect of rebar corrosion, a tension stiffening model is proposed and area reduction of rebars due to corrosion is considered. For the analysis of strengthened deteriorated RC beams, one dimensional truss element and an interface element are introduced for models of the strengthening composite and the interface between concrete and composite to simulate delamination or discontinuous behavior at the interface. Then, analyses for deteriorated RC beams strengthened with glass fiber reinforced epoxy panel (GFREP) are carried out to predict both flexural failure and plate-end delamination failure. Finally, analysis results are verified with experimental results.

• Journal of Information Display
• /
• v.6 no.3
• /
• pp.30-35
• /
• 2005

We have developed a paper-like display using polymer particles charged triboelectrically. By using a toner-type display with a simple structure, we continued that polymer particle movement is controlled by only a voltage difference between scan and data electrode. We fabricated a diagonal 2.4 inch panel on the glass substrate and successfully produced an image by the passive driving method with operating voltages of about ${\pm}$ 120 V. The contrast ratio was 4:1.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1263-1266
• /
• 2008

TFT-LCD panel makers have been enlarging size of TV screens, and 50-inch TFT-LCD is one of the main stream products already. To have more improved resolution, productivity and lower manufacturing cost, new TFT-LCD factories adopt large mother glass, new TFT structure and new process/materials. Along with these technology evolution, laser repair system should equip with upgraded performance and additional functions on user's demand. Laser repair technology is reviewed and newly developed repair technology is being introduced.

• Journal of the Korean Ceramic Society
• /
• v.47 no.2
• /
• pp.146-150
• /
• 2010

Because the plasma display panel has used red, green and blue(RGB) phosphors, it has suffer from two intrinsic problems; 1) the cell defect due to the lack of binding force between phosphor particles and 2) mis-discharge because of difference of electrical characteristics among RGB phosphors. In order to control the mechanical and electrical properties of RGB phosphors, frit with $ZnOB_2O_3-SiO_2-Al_2O_3$ system was added to RGB phosphor as sintering additive. The mechanical properties were increased by the amount of frit. The amount of frit under 5 wt% rarely affected dielectric constant. However, there was the limit of amount because of decreasing optical properties seriously; over 3 wt% in red, over 10 wt% in green and blue.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1673-1675
• /
• 2006

As the manufacturing capacity needs for large size LCD TV shifts very fast into next generation, processing and test equipment makers face more difficult challenges in accommodating productivity, reliability and lead time of panel makers as well as the prerequisite of high process quality. In this paper, AKT will discuss its new innovative productivity solutions in PECVD (Plasma Enhanced Chemical Vapor Deposition), as the key thin film process system, and EBT (Electron Beam Test), as the key array test system, for the huge glass size with surface dimension larger than 2 meter by 2 meter.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1199-1202
• /
• 2005

Inside of working PDP, there exist highly reactive conditions in the gap between two glass panels. MgO film and phosphor have been investigated as a function of discharge, also phosphor and sealing frits have been investigated as a function of temperature. Changes of impurity generation of MgO, phosphor and sealing fits were measured by using x-ray photoelectron spectroscopy (XPS) and quadropole mass spectroscopy (XPS) and quadropole mass spectrometer (QMS). Impurities such as CO, $CO_2$, OH and $H_2O$ were increased during discharge and heating treatment. Gaseous impurities such as carbon compounds and water deteriorated the characteristics of PDP operation during of lifetime. So metal is used to remove the impurities of phosphor and sealing frits during hearting, the result that the quantity of the impurities such as carbon monoxide and water was reduced.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1283-1286
• /
• 2006

A holding latch with level shifting function is proposed for power and cost effectiveness with low temperature polycrystalline silicon technology on the glass backplane. Layout area and power consumption of the proposed circuit are reduced by 10% and 52% compared with those of the typical structure which combines a static D-latch and a cross coupled level shifter for 2.2" qVGA panel, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1225-1228
• /
• 2005

Barrier ribs in the plasma display panel(PDP) function to maintain the discharge space between the glass plates as well as to prevent optical crosstalk. Patterning of barrier ribs is one of unique processes for making PDP. In this work photosensitive barrier rib pastes were prepared by incorporating binder polymer, solvent, functional monomers photoinitiator, and barrier rib powder of which surface was treated with fumed silica particles. Study on the function of materials for the barrier rib paste were undertaken. After optimization of paste formulation and photolithographic process, it was found that photolithographic patterning of barrier ribs with photosensitive barrier rib green sheet could be used in the fabrication of high resolution PDP.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.524-527
• /
• 2003

Plastic LCDs have remarkable advantages as compared to glass LCDs, but there still exist reliability issue. Regarding the reliability issue of plastic LCDs, we investigated the phenomena of dark spots that often occurred in plastic LCDs. It was recognized that dark spots are mainly caused by air bubbles that are induced from outside of LCD panel due to cell volume change with external stress and incomplete encapsulation. We have found that cell gap uniformity, spacer density and size and film deformation are important factors influencing dark spot behavior. In this paper, we discuss the phenomena and origin of dark spots in plastic LCDs

• Journal of Information Display
• /
• v.10 no.1
• /
• pp.24-27
• /
• 2009

A simple nonalkoxide sol-gel route for depositing an Al-doped ZnO thin film on a glass substrate was derived in this study. The initial Al dopant concentration in the sol-gel preparation varied and ranged from 0 to 5%. The sol-gel-derived thin films showed c-plane preferred crystallization of their hexagonal phase, with nanosized grain structures. First and second post-heat-treatments were carried out to improve the film’s electrical resistivity. The carrier density and the Hall mobility were measured and discussed to explain the electrical resistivity. The optical transmittance within the visible range showed compatible properties, which indicates the possible use of A1-doped ZnO as a transparent electrode in flat panel displays.