• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.757-760
• /
• 2005

In this study, glass abrasive sludge was utilized for a light weight material and graphite was used as expanding agent. The glass abrasive sludge with added expanding agent was formed into pellet by a pelletizer. When glass abrasive sludge is made as pellet, water glass is added as a binder(water : water glass = 8 : 2). The pellet was sintered at $700\~800^{\circ}C$ by rotary kiln composed of 4 segment temp. system. The absorption ratio of lightweight materials tended to increase in proportion to increasing content of graphite. The lowest value of specific gravity that was observed in this study was $1.8\%$.

• 한국세라믹학회지
• /
• 제44권9호
• /
• pp.510-516
• /
• 2007

After observing the alkali-silica reaction of the mortar that contains glass abrasive sludge, when evaluating it by a mineral or chemical point of view, it contained reactive silica $(59{\sim}67%)$ and $R_20$ elements $(4.3{\sim}9.8%)$. Also, when evaluated by the mortar bar method, an addition of 5 wt% of CRT glass abrasive sludge is judged harmless. However when adding more, there appear severe contractions, thus carefulness is needed while using. Less than 0.10% of expansion was measured when adding up to 30wt% of flat glass abrasive sludge. However, after 30 days of the measurement, more than 0.1% rate of expansion was measured when adding more than 5 wt%. Therefore, more detailed experiments are needed in case of more than 5 wt%.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.606-607
• /
• 2006

A porous material with a surface layer was fabricated using glass abrasive sludge and expanding agents. The glass abrasive sludges were mixed with expanding agents and compacted into pellets. These pellets were sintered in the range of $700-900^{\circ}C$ for 20min. The sintered porous materials had a surface layer with smaller pores and inner parts with larger pores. The surface layer and pores controlled the absorption ratio and physical properties.

• 한국세라믹학회지
• /
• 제43권5호
• /
• pp.277-283
• /
• 2006

A porous material with a surface layer was fabricated from glass abrasive sludge and expanding agents. The glass abrasive sludges were mixed with expanding agents and compacted into precursors. These precursors were sintered in the range of $700-900^{\circ}C$ for 20 min. The sintered porous materials had a surface layer with smaller pores and inner parts with larger pores. The surface layer and closed pores controlled water absorption. As the expanding agent fraction and the sintering temperature increased, the porosity and pore size increased. The porous materials with $Fe_2O_3$ and graphite as the expanding agents had a low absorption ratio of about 3% or lower while the porous material with $CaCO_3$ as the expanding agent had a higher absorption ratio and more open pores.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2004년도 추계총회 및 연구발표회 초록집
• /
• pp.94.2-94.2
• /
• 2004

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.533-536
• /
• 2006

A light-weight aggregate with a surface layer was fabricated using glass abrasive sludge and expanding agents. The glass abrasive sludges were mixed with expanding agents ($Fe_2O_3,\;graphite,\;CaCO_3$) and formed into precursors. These precursors were sintered in the range of $700-900^{\circ}C$ for 20min. The sintered light-weight aggregate had a surface layer with smaller pores and an inner region with larger pores. The surface layer and pores controlled the water absorption ratio and physical properties. As the expanding agent fraction and the sintering temperature increased, the porosity and pore size increased. The light-weight aggregate with $Fe_2O_3$ and graphite as the expanding agents had a low water absorption ratio while the porous material with $CaCO_3$ as the expanding agent had a higher water absorption ratio and more open pores.

• 한국광물학회지
• /
• 제22권4호
• /
• pp.353-358
• /
• 2009

CRT 브라운관 패널의 연마과정에서 배출되는 폐연마슬러지로부터 석류석 등의 연마재를 회수하고, 연마성능을 평가하였다. 재활용 부석과 석류석으로 연마한 유리의 평균표면거칠기값(Ra = $0.025{\mu}m$, = $0.029{\mu}m$)은 새 연마재로 연마한 유리에서의 값(Ra = $0.039{\mu}m$, $0.031{\mu}m$)보다 작았으며 표면의 선이나 홈도 적었다. 루즈의 경우 유리 파편이 혼입되어 연마재로 재활용하기에는 적합하지 않다. 본 기술을 이용하여 폐연마슬러지에 함유된 천연연마재 광물자원인 부석과 석류석을 회수한다면 CRT 유리 연마공정에서 재활용할 수 있고, 슬러지 매립으로 발생되는 처리비용과 환경오염문제를 줄일 수 있을 것이다.

• 한국세라믹학회지
• /
• 제42권1호
• /
• pp.37-42
• /
• 2005

유리연마슬러지와 graphite를 발포제로 사용하여 경량골재를 제조하였으며, 경량골재 내부기공과 물성과의 상관성을 도출하였다. 이때 graphite 함량을 각각 달리하여 성구를 제조하였으며, $700^{circ}C$ 및 $800^{circ}C$에서 20분 동안 소성하였다. 소성 전후 골제의 부피 변화를 검토한 결과, 발포제의 첨가량보다는 소성 온도가 즘 더 큰 영향을 미침을 확인하였다 기공의 크기 및 면적은 발포제 첨가량과 소성 온도 상승에 따라 증가하는 특징을 나타내었으나, 발포제 첨가량 $1\%$ 이상에서는 큰 폭의 증가를 동반하지 않았다. 흡수율/열전도율과 기공과의 상관성은 매우 높아, 각각의 상관관계계수는 $0.8\pm$ 이상을 나타내었다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.47.2-47
• /
• 2003

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.53.2-53
• /
• 2003