• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.505-510
• /
• 2001

To improve germinability of carrot seeds of 'Inari', 'Mansan', 'Mussang', and 'Hongsim' cultivars, various levels of solid matrix priming (SMP) and the physiological changes of seeds associated with SMP were examined. As the ratio of water in a seed-Micro Cel E-water mix and priming duration increased, seed germinability enhanced. However, there was radicle protrusion during SMP in some cultivars, indicating the existence of cultivar different variations of the optimum conditions. The optimum ratio for a seed-Micro Cel E-water mix was 5 : 3 : 10.5. In this mix, the optimum durations for the treatment were 3 days for 'Mansan' and 5 days for other cultivars. SMP at $20^{\circ}C$ to $25^{\circ}C$ resulted in a higher germination percentage and a shorter $T_{50}$. Seeds absorbed water quickly within an hour and the percentage of moisture was stable at 43 to 49 after 24 hours of the treatment. Conductivity of the mix declined for the first 6 hours to $100{\mu}S{\cdot}cm^{-1}$ with little changes thereafter. On the other hand, the pH of the mixed increased slightly during the early phase, and then returned to the initial level as the treatment proceeded.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.2
• /
• pp.62-69
• /
• 1999

With increased utilization of chemical fertilizer, soil fertility is getting serious problem. As a result, using organic soil conditioner (woody wastes or sawdust compost) would be only solution to recover soil vitality. In this study, manufacturing and characteristics of organic soil conditioner from Shiitake bedlogs (woody wastes) were studied. Also, to investigate the effect of continuous application of this bedlog compost on growth of plants, growth tests for radish and tree seedlings were done. The results are as follows ; Analytical results of decayed and fresh wood materials showed almost same as its wood components. The mixing ratio of raw materials with the other filling materials is essential for the manufacturing as well as good quality of its compost during composting process. In this experiment, mixing 12kg of urea, 25kg of lime, 40kg of chicken shit, and small amount of fermentation aids corresponding to I ton of sawdust resulted in good composts. Their moisture contents were adjusted to about 55%. Temperature of pile, in composting process, rose after I week and kept about above $60^{\circ}C$ for certain period. They were turned two times, 30th and 59th day, respectively, after piling. This bedlog compost contained 81.7% of high organic matter, 1.4% of a little nitrogen, 6.75 of pH and 25 - 30 of C/N ratio. There were no harmful effect on germination and growth of plants, such as radish and softwood and hardwood seedlings. Concerned to the effect of bedlog compost on soil temperature, the compost did not affect plant growth by changing soil temperature abruptly, but compensated the soil temperature such as a little increasing on the early morning, a little decreasing on the mid-day or afternoon (pm 2:00), and increasing on the early evening (pm 6:00).

• Korean Journal of Weed Science
• /
• v.7 no.1
• /
• pp.98-106
• /
• 1987

The effect of carbofuran (2, 3-Dihydro-2,2-dimethyl-benzofuran-7-ylmethyl carbamate) on rice growth was evaluated as a direct growth stimulant of rice. For this, several laboratory and field trials conducted from 1981 to 1986 at the Yeongnam Crop Experiment Station. Carbofuran solution affected the germination of rice seed. The growth of seminal roots was adversely affected by the increase of carbofuran concentrations while the length of single root became longer with the concentration increment up to 50 ppm. Carbofuran application (0.18g ai/$m^2$) at the rice nurserybed significantly enhanced the rice growth and recovered from the Low temperature damage. The enhancement effect was more pronounced at the plot that applied carbofuran before rice seeding as soil incorporation than top-dressing. The effect of growth enhancement further extended to transplanted lowland rice. This effect was greater at double cropping area (late of June transplanting) compared to single cropping area (May transplanting). Among important agronomic traits, the increment of panicle number was the most important direct effect for increasing rice grain yield by carbofuran application. Carbofuran application also exhibited the reducing effect against low temperature damage at reductive division stage and at rice heading stage and against submergence damage at booting stage through enhancement of fertile grain ratio, ripening ratio or photosynthetic activity.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.45-45
• /
• 2019

This experiment was carried out using artificial clay and LED in the plastic film house (irradiation time: 08:00~18:00/day). Seedlings (n = 63 per $3.3m^2$) of ginseng was planted on May 17, 2018. LED was combined with red and blue light in a 3:1 ratio and irradiated with different light intensity. The average air temperature from April to September was $12.3^{\circ}C$ $-26.0^{\circ}C$ and it was the the highest at $26.0^{\circ}C$ in August. The test area where fluorescent lamp was irradiated tended to be somewhat higher than the LED irradiation area. The chemical properties of the test soil are as follows. pH levels was 5.3~5.5, EC levels 0.45~0.52 dS/m and OM levels 33~37%. The total nitrogen content was 0.35~0.47% and the available $P_2O_5$ contents was 13.7~16.0 mg/kg, which was lower than the suitable level of 70~200 mg/kg. Exchangeable cations K and Mg contents were within acceptable ranges, but the Ca contents was $28{\sim}38cmol^+/kg$ levels higher than the permissible level ($2{\sim}6cmol^+/kg$). Germination of ginseng leaves took 8~9 days and the overall germination rate was 70~75%. The photometric characteristics of LED light intensity are as follows. The greater the light intensity, the higher the PAR (Photosynthetic Action Radiation) value, illuminance and solar irradiation. Photosynthetic rate was also increased with higher light intensity was investigated at $1.7{\sim}3.2{\mu}mol\;CO_2/m^2/s$. Leaf temperature ($23.7{\sim}24.8^{\circ}C$) by light intensity was the same trend. The growth of aerial parts (plant height etc.) were generally excellent when irradiated with 3 times the light intensity, the growth of the ginseng aerial parts were excellent as follows. The plant height was 42.6 cm, stem length was 25.2 cm, leaf length was 9.6 cm and stem diameter was 5.0 mm. The growth of underground part (root length etc.) was the same, and the root length was 24.4 cm, the tap root length was 6.0 cm, diameter of taproot was 18.2 mm and the fresh root weight was 17.2 g. There were no disease incidence such as Alternaria blight, Gray mold and Anthracnose. Disease of Damping off occurred 2.2~3.6% and incidence ratio of rusty root ginseng was 14.6~20.7%. Leaf discoloration rate was 13.7~48.9% and increased with increasing light intensity. Ginsenoside content of ginseng by light intensity is under analysis.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.24 no.4
• /
• pp.5-10
• /
• 2022

After ginseng seeds were planted in sand, the first experiment was conducted by germinating seeds with a nutrient concentration of 0 to 2.5. The average germination rate was highest in EC 1.0 with a nutrient concentration of 87%, followed by the comparative group with EC 1.5, 82%, EC 2.0, 78%, EC 2.5, 72%, EC 0.5, 71%, and con, 68%. Ginseng seeds were sown in the sandy soil, grown for 60 days were transferred to the ginseng soil, and the second growth experiment was conducted 30 days later. As a result of the experiment, at the nutrient concentration of EC 1.5, it grew from 11.64cm to 15.54cm, the average total length(cm)increased the most from 3.90cm. At the EC 1.0, nutrient concentration, the average total weight(g)increased the most from 0.42g to 0.75g to 0.33g. At the EC 0.5, nutrient concentration, the average total root width(mm) increased the most from 4.06mm to 5.52mm to 1.46mm.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.12a
• /
• pp.61-61
• /
• 2020

This experiment was carried out using artificial bed soil and LED in the plastic film house(irradiation time: 07:00-17:00/day). Seedlings(n=63 per 3.3 m²) of ginseng was planted on May 17, 2018. LED was combined with red and blue light in a 3:1 ratio and irradiated with different light intensity(40-160 µmol/m²/s). Average air temperature from April to September according to the light intensity test was 20.4℃-20.9℃. Average artificial bed soil temperature was 20.1℃-21.7℃. The test area where fluorescent lamp was irradiated tended to be somewhat lower than the LED irradiation area. The chemical properties of the test soil was as follows. pH levels was 6.6-6.7, EC levels 0.9-1.3 dS/m and OM levels 30.6-32.0%. The available P₂O₅ contents was 73.3-302.3 mg/kg. Exchangeable cations K and Ca contents were higher than the allowable ranges and mg content was high in the fluorescent lamp treatment. The photometric characteristics of LED light intensity are as follows. The greater the light intensity, the higher the PPFD(Photosynthetic Photon Flux Density) value, illuminance and solar irradiation. Fluorescent lamp treatment had high illuminance value, but PPFD and solar irradiation were lower than LED intensity 40 µmol/m²/s treatment. The photosynthetic rate increased(2.0-3.8 µmolCO²/m²/s) as the amount of light intensity increased, peaking at 120 µmol/m²/s, and then decreasing. The SPAD (chlorophyll content) value decreased as the amount of light intensity increased, and was the highest at 36.1 in fluorescent lamp treatment. Ginseng germination started on April 5 and took 14-17 days to germinate. The overall germination rate was 68.8-73.6%. The growth of aerial parts(plant height etc.) were generally excellent in the treatment of light intensity of 120-160 µmol/m²/s. The plant height was 41.9 cm, stem length was 24.1 cm, leaf length was 9.8 cm and stem diameter was 5.6 mm. The growth of underground part (root length etc.) was the best in the treatment with 120 µmol/m²/s of light intensity. Due to the root length was long(24.8 cm) and diameter of taproot was thick(18.7 mm), the fresh root weight was the heaviest at 24.8 g. There were no disease incidence such as Alternaria blight, Gray mold and Anthracnose. Disease of Damping-off caused by Rhizoctonia solani occurred 0.6-1.5% and incidence ratio of rusty root ginseng was 30.8-62.3%. It is believed that the reason for the high incidence of rusty root ginseng is that the amount of field moisture capacity of artificial bed soil is larger than the soil. Leaf discoloration rate was 13.7-32.3%.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.11-11
• /
• 2020

Background : The genus Cypripediums are typically adapted to the low temperature and cold climates of the high land in Korea. The species which were reported in Korean peninsula are C.japonicum, C.macranthos, C.calceolus and C.guttatum. We had already reported the successful germination of the C.macranthos and C.guttatum. The small spotted lady's slipper orchid(C.guttatum) is most endangered plants to extinction of which population was reported less than 100 in Korea. The objective of the present research is restoration of the C.guttatum in ex situ and adaptation in high land and nursery. Methods and Results : The 350 seedlings of C.guttatum were transplanted in soil at alpine area(altitude 750m) and the nursery of Korea National Arboretum(KNA) in YangPyeong city on May 2019 and 2020 in order to verify the possibility of ex situ restoration. The sprouted ratio of the seedlings were less than 10% in the alpine area and 83% in the nursery of KNA. The reasons of the diverse survival ratio are presumed as the low moisture content in the soil and heavy shade of the alpine area. The 15 cypripedium species and 29 hybrids were also effectively adapted in the KNA rare plant garden. Conclusion : These results demonstrated the difficulties of the restoration for small spotted lady's slipper orchid in the natural habitation. From the above results, we may conclude that the critical factors of the genus Cypripedium are intensive care for the fragile seedlings during the 1^st year acclimatization.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.12
• /
• pp.45-52
• /
• 2015

With the rising interest in the environment, more attention on ecological restoration for damaged slope surface to restore its original state has been drawn. Generally, the most useful method is vegetation based spray work. This method uses green soil including sewage sludge, sawdust, paper sludge, and weathered granite soil. However, because there are neither accurate information nor test values about green soil, green soil is often lost by environmental factors such as rainfalls and strong winds. To solve the problem of green soil, it is necessary to prepare design standards about green soil, and conduct studies to deal with green soil loss in consideration of various variables including basic material property, soil quality of slope surface, and weather. This study was conducted in the mixture of green soil and eco-friendly soil stabilizer. With green soil, basic material property test and compaction test were conducted for the analysis on the basic characteristics of green soil. In the mixture with soil stabilizer at a certain ratio, we conducted shear strength test depending on the ratio in order to analyze the maximum shear strength, cohesion and the change in internal friction angles. Furthermore, in the mixture ratio of green soil and soil stabilizer, which is the same as the ratio in the shear strength test, an inclination of slope surface was made in laboratory for the analysis on erosion and germination rate. Finally, this study evaluated the most effective and economic mixing ratio of soil stabilizer to cope with neighboring environmental factors. According to the test, the shear strength of green soil increased up to 51% rely onto the mixing ratio of and a curing period, and its cohesion and internal friction angle also gradually increases. It is judged that the mixture of soil stabilizer was effective in improving shear strength and thereby increased the stability of green soil.

• The Korean Journal of Mycology
• /
• v.10 no.3
• /
• pp.119-124
• /
• 1982

The characteristics of the six different agricultural soil from Michigan were as follows. Colwood and Capac soil were loam, Gilford and Ceresco were sandy clay loam, Sission was clay loam, and Spinks was sandy loam. pH of Gilford sandy clay loam was 6.6 whereas that of the soil ranged $5.4{\sim}5.9$. Gilford sandy loam found to contain a relatively higher amount of organic matters as compared to other soils. Furthermore, the numbers of bacteria in Gilford sandy clay loam were significantly higher than those in other soils. The populations of fungi in Gilford sandy clay loam and Colwood loam soils were significantly greater than those in other soils. On the other hand, the densities of actinomycetes in Gilford sandy clay loam and Ceresco sandy clay loam soils were significantly different from those in other soils. The population of anaerobic bacteria varied depending on the soils; Ceresco sandy clay loam, Capac loam, Colwood loam soils have higher numbers of bacteria, whereas Gilford sandy clay loam was very lesser than the other soils. In the $^{14}C-glucose$ respiration by soil microorganisms after 10 hrs, the respiration rate was decreasing in the order of Ceresco sandy clay loam, Spinks sandy loam, Colwood loam, Sission clay loam, Capac loam and Gilford sandy clay loam. Germination of test propagules on natural soil soil was $0{\sim}5%$, and it was germinated $90{\sim}98%$ on autoclaved soil and PDA. The propagules differed in thier germination response to nutrients added to the soils. In general, more nutrients were required to promote germination on Capac loam and Gilford sandy loam soil than Spinks sandy loam soil. Especially Mortierella n. sp. required more nutrients for germination to obtain the same ratio as Helminthosporium victoriae.

• Journal of Korean Society of Forest Science
• /
• v.96 no.3
• /
• pp.307-316
• /
• 2007

Yellow poplar (Liriodendron tulipifera L.) has low germination rate relatively other species, so the seedling production of Yellow poplar is a hard task. Accordingly this study was conducted to determine the optimal germination conditions for healthy seedling production and to promote survival rate after afforestation. Gemination percentage was examined at different media and seed covering materials using planting flats in the greenhouse. The best germination percentage was observed in sand for media and compound soil for covering materials. But it was time to transplant, seedlings became a poor character (i.e. height, root length, number of root, dry weight) in sand for media. In order to produce healthy seedlings, each different medium was compounded with TKS-2 (this is a gardening bed soil.) in the ratio 1:1 (v/v.), and compared two conditions. Quality of seedling was better than not mixed TKS-2 into each medium. Transplanting seedlings from greenhouse to nursery grew up rapidly 2 months later (early in August~early in October). Growth amount during two months corresponded to 85.6% and 71.3% in total growth amount of height and diameter at root collar, respectively. In the case of the competition-density effect on yellow-poplar seedlings, direct seedling produced the maximum 35 standard seedlings above 8 mm of root collar diameter per $m^2$, while transplanting seedling produced the maximum 64 standard seedlings per $m^2$. And produced seedlings of two way were significantly different rootlet while axial root and lateral root was not significantly different.