• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.4
• /
• pp.11-16
• /
• 2008

The goal of this study is to evaluate the KLT(Kanade-Lucas-Tomasi) for extracting and tracking the features using various data acquired from UAV. Sequences of images were collected for Jangsu-Gun area to perform the analysis. Four data sets were subjected to extract and track the features using the parameters of the KLT. From the results of the experiment, more than 90 percent of the features extracted from the first frame could successfully track through the next frame when the shift between frames is small. But when the frame to frame motion is large in non-consecutive frames, KLT tracker is failed to track the corresponding points. Future research will be focused on feature tracking of sequence frames with large shift and rotation.

• Journal of Korean Society for Geospatial Information Science
• /
• v.2 no.2 s.4
• /
• pp.125-130
• /
• 1994

The original concept of GPS is the feature of instantaneous navigation which is the determination of the position of a moving vehicle(ie, a ship, a car, an air craft) by unsmoothed code pseudoranges. The objective of study is compare the efficiency (or time, accuracy) between GPS surveying by using kinematic method and conventional surveying methods in the intersection, and then suggest research materials for actual application.

• Journal of Korean Society for Geospatial Information Science
• /
• v.4 no.1 s.6
• /
• pp.67-73
• /
• 1996

The objective of this research is to investigate the behavior of the $F\"{o}rstner$ interest operator, which has been widely used for detecting distinct points in the field of digital photogrammetry and computer vision, in scale space. Considering the hugh volume of digital image utilized in digital photogrammetry, the scale space (image pyramid) approach which appears to be a solution for enhancing image processing, began to gain its attention. The investigation of the $F\"{o}rstner$ interest operator in scale space generated by the Gaussian kernel shows its behavior and feasibility for being used in practice.

• Journal of Korean Society for Geospatial Information Science
• /
• v.3 no.2 s.6
• /
• pp.83-90
• /
• 1995

The standardization of NGIS emerges as an important subject because of the needs for sharing information and assuring of information inter-operability. The standardization could be developed by refering OSE/RM, which is promoted internationally, that the corresponding national standards are required. The standardization of NGIS, that has been promoting, consists of standardization of national electronic base-map and common data exchange format. The process for standardization of base-map has been taken in the area of feature-attribute code and data modeling. In the area of common data exchange format, we have been accepted the accommodation of international standards as the national standard.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.06a
• /
• pp.327-331
• /
• 2008

OGC(Open Geospatial Consortium) SWE(Senser Web Enablement)는 오픈 표준 기반 서비스로써 다중 센서의 정보를 취합하여 3차원 가시화 및 분석, 편집에 활용되는 웹시스템의 표준이다. 본 연구에서는 OGC SWE의 WFS(Web Feather Service)와 유사한 오픈 표준 기반 객체정보 웹서비스 시스템을 고안하고, 실제 지하시설물을 대상으로 OGC의 City-GML을 국내 표준인 3DF-GML으로 해체하여 웹서비스 가능성을 타진하였다. 본 연구를 통해 도출된 웹서비스는 향후 오픈 표준 기반 3차원 GIS 시스템 구축에 본보기가 될 것으로 기대된다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.5 s.23
• /
• pp.17-28
• /
• 2002

Time is regarded as an essential feature of land information enabling to track historical landmarks of land uses, ownerships, and taxations based on cadastral maps. Object-oriented temporal modeling helps to simulate and imitate time-varying cadastral data in a chronological and persistent manner. The aim of study is to analyze the role of temporal cadastre tracing footprints of foregoing events in response to various needs and demands associated with historical information of cadastral transactions. In this paper, temporal cadastral object model (TCOM) is proposed to delineate object version history. As an evidence of a new approach and conceptual idea for the importance of temporal cadastre, a part of spatio-temporal processes is illustrated to explain major changes of cadastral map. The feasibility and application of the approach is confirmed by proof-of-concept of temporal cadastre in land information management.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.4
• /
• pp.101-107
• /
• 2013

Generally the commercial high-resolution images have their coordinates, but the locations are locally different according to the pose of sensors at the acquisition time and relief displacement of terrain. Therefore, a process of image co-registration has to be applied to use the multi-temporal images together. However, co-registration is interrupted especially when images include the cloud-covered regions because of the difficulties of extracting matching points and lots of false-matched points. This paper proposes an automatic co-registration method for the cloud-covered high-resolution images. A scale-invariant feature transform (SIFT), which is one of the representative feature-based matching method, is used, and only features of the target (cloud-covered) images within a circular buffer from each feature of reference image are used for the candidate of the matching process. Study sites composed of multi-temporal KOMPSAT-2 images including cloud-covered regions were employed to apply the proposed algorithm. The result showed that the proposed method presented a higher correct-match rate than original SIFT method and acceptable registration accuracies in all sites.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.3
• /
• pp.209-219
• /
• 2019

Satellite imagery occurs geometric and radiometric errors due to external environmental factors at the acquired time, which in turn causes false-alarm in change detection. These errors should be eliminated by geometric and radiometric corrections. In this study, we propose a methodology that automatically and simultaneously performs geometric and radiometric corrections by using the SURF (Speeded-Up Robust Feature) algorithm and the mask filter. The MPs (Matching Points), which show invariant properties between multi-temporal imagery, extracted through the SURF algorithm are used for automatic geometric correction. Using the properties of the extracted MPs, PIFs (Pseudo Invariant Features) used for relative radiometric correction are selected. Subsequently, secondary PIFs are extracted by generated mask filters around the selected PIFs. After performing automatic using the extracted MPs, we could confirm that geometric and radiometric errors are eliminated as the result of performing the relative radiometric correction using PIFs in geo-rectified images.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.57-63
• /
• 2008

Recently, OGC(Open Geospatial Consortium) take the lead in SWE(Sensor Web Enablement) research that collection various context information from sensor networks and show it on map by web. OGC SWE WG(Working Group) defines a standard encoding about realtime spatiotemporal appear geographical feature, sensing data and support web services. This paper proposes a visualization scheme of sensing data based location on 2D maps. We show realtime sensing data on moving node that mapping GPS data on map. First, we present an algorithm and procedure that location information change to position of maps for visualization sensing data based on 2D maps. For verifying that algorithm and scheme, we design and implement a program that collecting GPS data and sensing data, and displaying application on 2D maps. Therefore we confirm effective visualization on maps based on web which realtime image and sensing data collected from sensor network.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.4 s.27
• /
• pp.35-43
• /
• 2003

Currently, the government has been driving numerous projects to build the e-government which can enable limitless access and utilization of the information through the accomplishment of the real time based various administrative services. In water resource field, a project to generate digital river thematic maps has been undergoing as a part of the computerization projects. As a partial results, the RIMGIS project has been completed and generation of the various river thematic maps has been required to fully utilize the DB built from RIMGIS project. For the effective generation of the thematic maps, a data model needs to be developed. A data model has been developed in this study to provide more efficient method to generate the thematic maps utilizing existing DB. The data model proposed from this study has defined the relationships between core feature data and framework Data along with relationships among data elements to represent the rivers in the real world more accurately. The core feature data and framework layers have been defined based on the survey of the domestic and foreign case studies along with requirement analysis of the users in the water resource field. The proposed core feature data has been defined based on the minimum unit of 'class', and the relationship between classes has been established based on the ArcGIS Hydro Data Model for the integrated processing of the river information. The proposed spatial data model can be judged to contribute establishing more efficient generation methodology of the river thematic maps.