• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.2
• /
• pp.77-86
• /
• 2014

As raster-based high quality and resolution spatial information has appeared, 1/1,000 digital map lost either its recognition or uses because of insufficient new modified and updated information. Therefore, this study analyzed the linkage between three-dimensional spatial information and 1/1,000 digital map, and also suggested a modification plan of 1/1,000 digital map, made by three-dimensional spatial information. In fact, some area of Incheon and Busan were presented with the modification plan of 1/1,000 digital map as three-dimensional trial models. These trials reflected possibilities of modification by qualitative and quantitative analysis of 1/1,000 digital map, using three-dimensional object model.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.2
• /
• pp.33-45
• /
• 2011

The purpose of this study to analyze landslide-triggering factors using the 38 landslide cases occurred by typhoon, Rusa in 2002, Maemi in 2003 and Ewiniar in 2006 and geospatial characteristics in Hamyang and Geochang County. where two day's heavy rainfall was concentrated on. The rainfalls factors to trigger landslides were accumulative rainfall (>230mm) and rainfall intensity(>30-75mm). The highest landslide frequency was concentrated on the areas of 400-900m in height and on the slopes of $25-40^{\circ}$ in degree. The frequency of landslide was high exceedingly above 80% of a slope attitude, while the frequency is very low below 70%. Granite was more susceptible as much as 9 times than metamorphic rocks. In areas mixed soil with gravels and rock blocks, the frequency of landslide was 73%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.35-35
• /
• 2012

Most grid-based distributed hydrologic models are complex in terms of data requirements, parameter estimation and computational demand. To address these issues, a simple grid-based hydrologic model is developed in a geographic information system (GIS) environment using storage-release concept. The model is named GIS Storage Release Model (GIS-StoRM). The storage-release concept uses the travel time within each cell to compute howmuch water is stored or released to the watershed outlet at each time step. The travel time within each cell is computed by combining the kinematic wave equation with Manning's equation. The input to GIS-StoRM includes geospatial datasets such as radar rainfall data (NEXRAD), land use and digital elevation model (DEM). The structural framework for GIS-StoRM is developed by exploiting geographic features in GIS as hydrologic modeling objects, which store and process geospatial and temporal information for hydrologic modeling. Hydrologic modeling objects developed in this study handle time series, raster and vector data within GIS to: (i) exchange input-output between modeling objects, (ii) extract parameters from GIS data; and (iii) simulate hydrologic processes. Conceptual and structural framework of GIS StoRM including its application to Pleasant Creek watershed in Indiana will be presented.

• Korean Journal of Remote Sensing
• /
• v.23 no.5
• /
• pp.473-481
• /
• 2007

Joint Forest Management(JFM) is a concept of developing partnerships between fringe forest user groups and the Forest Department(FD) on the basis of mutual trust and jointly defined roles and responsibilities with regard to forest protection and development. In India, JFM was started during 1992 and it was implemented in many states. However success rate of JFM activity was not promising. Though there are many factors attributed to the failures, one of the main factors is the JFM site. This paper deals with the significant ground works to be done before planning for JFM using recent technologies such as remote sensing(RS) and Geographic Information System(GIS). Also it deals with the advantages of weighted overlay analysis in selecting suitable sites for JFM taking into consideration the various criteria. As a result of weighted overlay analysis, there were four types of suitability classes viz., less, moderate, highly and un-suitable. The moderately suitable class occupied maximum area(13209.64 ha) than less and highly suitable classes. If JFM is implemented on the suitability area, then the failure could be avoided in the future.

• Korean Journal of Remote Sensing
• /
• v.24 no.5
• /
• pp.497-506
• /
• 2008

The needs for digital models of real environment such as 3D terrain or cyber city model are increasing. Most of applications related with modeling and simulation require virtual environment constructed from geospatial information of real world in order to guarantee reliability and accuracy of the simulation. The most fundamental data for building virtual environment, terrain elevation and orthogonal imagery is acquired from optical sensor of satellite or airplane. Providing interoperable and reusable digital model is important to promote practical application of high-resolution satellite imagery. This paper presents the new research regarding representation of geospatial information, especially for 3D shape and appearance of virtual terrain. and describe framework for constructing real-time 3D model of large terrain based on high-resolution satellite imagery. It provides infrastructure of 3D simulation with geographical context. Web architecture, XML language and open protocols to build a standard based 3D terrain are presented. Details of standard-based approach for providing infrastructure of real-time 3D simulation using high-resolution satellite imagery are also presented. This work would facilitate interchange and interoperability across diverse systems and be usable by governments, industry scientists and general public.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.4
• /
• pp.155-161
• /
• 2018

Recently, the development of sensor technology has led to an increase in research on unmanned aerial photogrammetry in various fields such as digital mapping, monitoring, cadastral survey, coastal survey, and topographic survey. However, existing studies are mainly limited experiments and analysis of specific application field, which is insufficient to demonstrate the validity of unmanned aerial photogrammetry for geospatial information construction. In this study, the studies related to the accuracy of unmanned aerial photogrammetry were investigated. The flight altitude and accuracy of horizontal direction is proportional to the GSD by analyzing the results of the individual studies conducted on the unmanned aerial photogrammetry within the last 5 years. In addition, the accuracy of the evaluation results varied widely according to the experimental conditions, and the problems of the previous studies that lacked the number of samples to evaluate the results were identified. A total accuracy analysis of 322 checkpoints yielded an accuracy of 0.028m in the horizontal direction and 0.044m in the vertical direction. In the future, the results of this study can be used as a basis for the validity of spatial information construction using unmanned aerial photogrammetry.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.5
• /
• pp.297-311
• /
• 2021

Around the world, there is an increasing interest in Digital Twin cities. Although geospatial data is critical for building a digital twin city, currently-established spatial data cannot be used directly for its implementation. Integration of geospatial data is vital in order to construct and simulate the virtual space. Existing studies for data integration have focused on data transformation. The conversion method is fundamental and convenient, but the information loss during this process remains a limitation. With this, standardization of the data model is an approach to solve the integration problem while hurdling conversion limitations. However, the standardization within indoor space data models is still insufficient compared to 3D building and city models. Therefore, in this study, we present a comparative analysis of data models commonly used in indoor space modeling as a basis for establishing a generic indoor space feature model. By comparing five models of IFC (Industry Foundation Classes), CityGML (City Geographic Markup Language), AIIM (ArcGIS Indoors Information Model), IMDF (Indoor Mapping Data Format), and OmniClass, we identify essential elements for modeling indoor space and the feature classes commonly included in the models. The proposed generic model can serve as a basis for developing further indoor feature models through specifying minimum required structure and feature classes.

• Journal of KIBIM
• /
• v.11 no.4
• /
• pp.20-30
• /
• 2021

In the era of the 4th industrial revolution, smart construction is actively researched, in the domestic construction field, and one of the key elements in this field is Building Information Modeling(BIM). In Korea, smart construction is being implemented through BIM-based digitization and intelligence. The geotechnical engineering field should also prepare for the introduction of BIM. In this study, the concept and application status of GeoBIM were identified, and the direction of future research was presented. This study is a part of the study "Establishment of GeoBIM-based Digital Twin Maintenance System" in the current "Technology Development for Establishment of Jeju Ground Collapse Response System for Safe Road Operation". The subject and scope of the study is continuous excavation at caves located under roads in Jeju Island, and initial research is being conducted on Jaeamcheon-gul and Jeonggusu-gul. This study aims to build a digital twin through individual data construction and integration processes such as cave shape modeling using laser scanners, 3D stratum modeling using borehole information and geophysical exploration data, and modeling of surrounding conditions using drones.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.945-951
• /
• 2022

The major objective of this research is to evaluate performance of improved intersections for response time to emergency vehicle preemption. Smart technologies have been introduced to civil infrastructure systems for resilient communities. The technologies need to evaluate their effectiveness and feasibility to confirm their introduction. This research focuses on the performance of emergency vehicle preemption, represented by response time, when smart intersections are introduced in a community. The response time is determined by not only intersections but also a number of factors such as traffic, distance, road conditions, and incident types. However, the evaluation of emergency response has often ignored factors related to emergency vehicle routes. In this respect, this research synthetically analyzes geospatial and incident data using each route of emergency vehicle and conducts before-and-after evaluations. The changes in performance are analyzed by the impact of smart intersections on response time through Bayesian regression models. The result provides measures of the project's performance. This study will contribute to the body of knowledge on modeling the impacts of technology application and integrating heterogeneous data sets. It will provide a way to confirm and prove the effectiveness of introducing smart technologies to our communities.

• ETRI Journal
• /
• v.45 no.2
• /
• pp.240-253
• /
• 2023

Spatial information is geometrical information combined with the properties of an object. In city areas where unmanned aerial vehicle (UAV) usage demand is high, it is necessary to determine the appropriate driving altitude considering the height of buildings for safe driving. In this study, we propose a data-provision method that generates the driving altitude of UAVs with a pseudo-3D building model. The pseudo-3D building model is developed using high-precision spatial information provided by the National Geographic Information Institute. The proposed method generates the driving altitude of the UAV in terms of tile information, including the UAV's starting and arrival points and a straight line between the two points, and provides the data to users. To evaluate the efficacy of the proposed method, UAV driving altitude information was generated using data of 763 551 pseudo-3D buildings in Seoul. Subsequently, the generated driving altitude data of the UAV was verified in AirSim. In addition, the execution time of the proposed method and the calculated driving altitude were analyzed.