• Proceedings of the Korean Magnestics Society Conference
• /
• 2013.12a
• /
• pp.139-140
• /
• 2013

We investigate effect of a point defect on the pinning potential for a perpendicular magnetic domain wall based on the NEB method. We find that this method can give a reasonable value for the pinning potential and allows us to study the effect of various geometrical and magnetic properties on the pinning potential. In the presentation, we will discuss the effect of Ku and wire width on the pinning potential in detail.

• Transactions of Materials Processing
• /
• v.16 no.7
• /
• pp.521-529
• /
• 2007

This paper is concerned with the analysis on the surface expansion of AA 2024 and AA 1100 aluminum alloys in backward extrusion process. Due to heavy surface expansion appeared usually in the backward can extrusion process, the tribological conditions along the interface between the material and the punch land are very severe. In the present study, the surface expansion is analyzed especially under various process conditions. The main goal of this study is to investigate the influence of degree of reduction in height, geometries of punch nose, friction and hardening characteristics of different aluminum alloys on the material flow and thus on the surface expansion on the working material. Two different materials are selected for investigation as model materials and they are AA 2024 and AA 1100 aluminum alloys. The geometrical parameters employed in analysis include punch corner radius and punch nose angle. The geometry of punch follows basically the recommendation of ICFG and some variations of punch geometry are adopted to obtain quantitative information on the effect of geometrical parameters on material flow. Extensive simulation has been conducted by applying the rigid-plastic finite element method to the backward can extrusion process under different geometrical, material, and interface conditions. The simulation results are summarized in terms of surface expansion at different reduction in height, deformation patterns including pressure distributions along the interface between workpiece and punch, comparison of surface expansion between two model materials, geometrical and interfacial parametric effects on surface expansion, and load-stroke relationships.

• Education of Primary School Mathematics
• /
• v.13 no.2
• /
• pp.85-97
• /
• 2010

The purpose of this study is to develop a teaching program in consideration of the geometrical thinking levels of students to make a contribution to teaching figures effectively. To do this, we checked the geometrical thinking levels of fourth-graders, developed a teaching program based on van Hiele's theory, and investigated its effect on their geometrical thinking levels. The teaching program based on van Hiele's theory put emphasis on group member interaction and specific activities through offering various geometrical experiences. It contributed to actualizing activity-centered, student-oriented, inquiry-oriented and inductive instruction instead of sticking to expository, teacher-led and deductive instruction. And it consequently served to improving their geometrical thinking levels, even though some students didn't show any improvement and one student was rather degraded in that regard - but in the former case they made partial progress though there was little marked improvement, and in the latter case she needs to be considered in relation to her affective aspects above all. The findings of the study suggest that individual variances in thinking level should be recognized by teachers. Students who are at a lower level should be given easier tasks, and more challenging tasks should be assigned to those who are at an intermediate level in order for them to have a positive self-concept about mathematics learning and ultimately to foster their thinking levels.

• Advances in nano research
• /
• v.9 no.3
• /
• pp.147-156
• /
• 2020

This research is related to nonlinear stability analysis of advanced microbeams reinforced by Graphene Platelets (GPLs) considering generic geometrical imperfections and thermal loading effect. Uniform, linear and nonlinear distributions of GPLs in transverse direction have been considered. Imperfection sensitivity of post-bucking behaviors of the microbeam to different kinds of geometric imperfections have been examined. Geometric imperfection is first considered to be identical as the first buckling mode, then a generic function is employed to consider sine-type, local-type and global-type imperfectness. Modified couple stress theory is adopted to incorporate size-dependent behaviors of the beam at micro scale. The post-buckling problem is solved analytically to derive load-amplitude curves. It is shown that post-buckling behavior of microbeam is dependent on the type geometric imperfection and its magnitude. Also, post-buckling load can be enhanced by adding more GPLs or selecting a suitable distribution for GPLs.

• Korean Journal of Computational Design and Engineering
• /
• v.2 no.3
• /
• pp.186-194
• /
• 1997

This paper describes new methods to minimize the cutting time in zigzag milling operation of two dimensional polygonal surfaces. Previous works have been focused on mainly experimental approaches by considering some machining parameters such as, spindle speed, depth of cut, cutter traverse rate, cutter diameter, number of teeth, tool wear, life of tool, and so on. However, in this study, we considered two geometrical factors one by one in order to see the effect separately, which are the length of cut and the number of cutter traverse. In an N-sided concave or convex polygon, an algorithm has been developed which minimize the total length of cut. Also, a heuristic approach was used to minimize the number of cutter traverse.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.04a
• /
• pp.51-57
• /
• 2001

In order to estimate attenuation characteristics, nonparametric model is used. Evaluation of this model requires suites of average spectral amplitude data as a function of distance without adopting any assumed parametric forms. Values of Quality factor, Q were estimated for individual frequencies by matrix inversion of S wave amplitude spectra for 21 records of 8 small and intermediate earthquakes (2.7$(1/r)^{1/2}$. The best models for 1/Q values were found to be 0.000453+0.001851/f and 0.000451+0.009261/f, respectively. This results can be compared to the conventional functional form of Q=$af^{b}$ and be used to estimate source spectra and site response.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.10
• /
• pp.2009-2016
• /
• 2008

The relationship between thermal decomposition temperature and structure of a new data set of eighty monomers of different polymers were studied by multiple linear regression (MLR). The stepwise method was used in order to variable selection. The best descriptors were selected from over 1400 descriptors including; topological, geometrical, electronic and hybrid descriptors. The effect of number of descriptors on the correlation coefficient (R) and F-ratio were considered. Two models were suggested, one model having four descriptors ($R^2$ = 0.894, $Q^2_{cv}$ = 0.900, F = 172.1) and other model involving 13 descriptors ($R^2$ = 0.956, $Q^2_{cv}$ = 0.956, F = 125.4).

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.625-627
• /
• 2005

Existent distance measurement that use camera is method that use both Stereo Camera and Monocular Camera, There is shortcoming that method that use Stereo Camera is sensitive in effect of a lot of expenses and environment variables, and method that use Monocular Camera are big computational complexity and error. In this study, reduce expense and error using Monocular Camera and I suggest algorithm that measure distance, Extract features using scale Invariant features Transform(SIFT) for distance measurement, and this measures distance through features matching and geometrical analysis, Proposed method proves measuring distance with wall by geometrical analysis free wall through feature point abstraction and matching.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.4
• /
• pp.71-75
• /
• 2007

Geometrical error of ultra-precision machining due to spherical tool alignment error is analyzed. Deviation of spherical edge, ranged several ten micrometers, generates vertical and horizontal error of tool path and affects profile accuracy of machined surface. Simulation of machined error shows effect of tool alignment error and enables to estimate alignment error. This work provides technical insights into the minimizing of geometrical error of ultra-precision machining.

• Fashion & Textile Research Journal
• /
• v.10 no.4
• /
• pp.426-435
• /
• 2008

The purpose of this study is to consider the changes of the early twentieth century fashion in pursuit of mechanical beauty. As for the research methodology, literature survey has been undertaken. The results of this study are as following. In early twentieth century, fashion concept on the expression of mechanical beauty was considered as abstractness, atypicality, and high-tech. The abstractness of fashion was expressed by geometrical purity, box silhouette, moderate color, and cheap materials in association with mechanical reasonability and efficiency. The atypicality of fashion was connected progressive taste motivated by mechanical dynamic effect. This tendency of dress was constructed technically in response with the movement of body and totally transgressed conventional notions of clothing. The high-tech of fashion was presented by geometrical forms and metal materials in relation with the future-oriented utopia and the harmony between human and machine.