• Current Optics and Photonics
• /
• 제7권3호
• /
• pp.237-247
• /
• 2023

In middle- and long-distance imaging systems, due to the atmospheric turbulence caused by temperature, wind speed, humidity, and so on, light waves propagating in the air are distorted, resulting in image-quality degradation such as geometric deformation and fuzziness. In remote sensing, astronomical observation, and traffic monitoring, image information loss due to degradation causes huge losses, so effective restoration of degraded images is very important. To restore images degraded by atmospheric turbulence, an image-restoration method based on improved compound multibranch feature fusion (CMFNetPro) was proposed. Based on the CMFNet network, an efficient channel-attention mechanism was used to replace the channel-attention mechanism to improve image quality and network efficiency. In the experiment, two-dimensional random distortion vector fields were used to construct two turbulent datasets with different degrees of distortion, based on the Google Landmarks Dataset v2 dataset. The experimental results showed that compared to the CMFNet, DeblurGAN-v2, and MIMO-UNet models, the proposed CMFNetPro network achieves better performance in both quality and training cost of turbulent-image restoration. In the mixed training, CMFNetPro was 1.2391 dB (weak turbulence), 0.8602 dB (strong turbulence) respectively higher in terms of peak signal-to-noise ratio and 0.0015 (weak turbulence), 0.0136 (strong turbulence) respectively higher in terms of structure similarity compared to CMFNet. CMFNetPro was 14.4 hours faster compared to the CMFNet. This provides a feasible scheme for turbulent-image restoration based on deep learning.

• Current Optics and Photonics
• /
• 제8권4호
• /
• pp.375-381
• /
• 2024

In this report, we present the design, fabrication, and experiment of a static solar system for electric vehicle (EV) applications. The static concentration component is composed of compound parabolic concentrators (CPCs) couplings with multi-junction solar cells, where a flat silicon panel is added to the bottom of the CPV structure to maximize power generation. This design allows the system to collect both direct sunlight and diffused sunlight. The CPCs were fabricated with acrylic with a geometric concentration ratio of 4×. We built a prototype with a (3 × 3) cell array of CPCs with a thickness of 25 mm, which is as thin as conventional flat photovoltaic panels, and performed an outdoor experiment that showed that after six hours of operation, the system had an acceptance angle of approximately 43° and an average daily efficiency of 22.85%.

• 한국정밀공학회지
• /
• 제19권10호
• /
• pp.99-106
• /
• 2002

This paper proposes an error compensation method that improves accuracy with geometry information of injection molding parts. Geometric information can give an improved accuracy in reverse engineering. Measuring data can not lead to get accurate geometric model, including errors of physical parts and measuring machines. Measuring data include errors which can be classified into two types. One is molding error in product, the other is measuring error. Measuring error includes optical error of laser scanner, deformation by probe forces of CMM and machine error. It is important to compensate these in reverse engineering. Least square method (LSM) provides the cloud data with a geometry compensation, improving accuracy of geometry. Also, the functional shape of a part and design concept can be reconstructed by error compensation using geometry information.

• 대한원격탐사학회지
• /
• 제27권2호
• /
• pp.141-150
• /
• 2011

다중센서자료를 동시에 활용하기 위해서는 센서 간의 정밀한 기하보정이 요구된다. 이에 본 연구에서는 선형정보를 추출하여 고해상도의 광학영상과 SAR 영상 간의 기하보정을 수행하는 것을 목적으로 한다. 이를 위해 기준영상과 대상영상에 대하여 수동으로 매칭쌍을 추출하여 두 영상 간의 좌표체계를 개략적으로 일치시켜주는 과정을 전처리로 수행하였다. 방사적 특성이 다른 두 영상에 대하여 Canny edge operator를 통해 선형 화소를 추출한 뒤, 비용함수를 구성하여 유사하다고 생각되는 점을 초기 매칭쌍으로 선정하고, 그 중에서 이상치로 판단되는 오매칭쌍을 제거하고 남은 대상을 최종 매칭쌍으로 추출하였다. 본 기법을 통해 영상 전역에 걸쳐서 고르게 분포된 다수의 매칭쌍을 추출할 수 있었을 뿐만 아니라, 고도가 높거나 고도 변화가 큰 지역적 특성으로 인해 지리적 위치오차를 포함하는 지역에서 추출된 매칭쌍을 효과적으로 제거할 수 있었다. 최종적으로 추출된 매칭쌍을 이용하여 piecewise linear function과 affine transformation을 결합한 새로운 변환모델식을 적용하여 기하보정 정확도를 높이고자 하였고, 수동으로 추출된 검사점을 통해 1.58의 RMSE 값을 도출하였다.

• 한국전기전자재료학회논문지
• /
• 제29권8호
• /
• pp.494-498
• /
• 2016

In this paper, we proposed the 3-dimenstional (3D) analysis for calculating the optical characteristics of an autostereoscopic display with electric field driven liquid crystal (ELC) lens. From 3D analysis considering the slanting of lens, we calculate the cross-talk of each images and the distortion of viewing zone. Using geometric opics and extended Jones matrix method (EJMM), phase retardation of ELC lens according to position is calcuated and then optical path difference in 3D space considering tilt and azimuth angle of incident light is gotten. Then, intensity distribution is presented in the space. Through camparing the intensity distribution using ideal lens with the ELC lens, we identify the noise and image distortion of ELC lens. As a result, this analysis is expected to provide optimum design conditions for realistic and rigorous 3D display with ELC lens.

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.242-246
• /
• 2017

In this study, it was investigated about optical simulation in high brightness and high uniformity general lighting using glass light guide plate. And we adopt edge-light emission type light plate. Edge-light type lighting has been used LCD application, especially note PC or smart phone backlight unit. Because it had the good properties such as slim shape and light weight. We thought this type was suitable for general lighting application such as wall attached type or ceiling mount type. But many of edge-light type lighting had problems. It called slanted output light rays. That was main key parameter how could control the direction of output light rays. We investigated the solution of this problems, using ray tracing method, we recognized the major fact of the solution relied on the geometric structure of diffusing dot shape. We set the conditions of aspect ratio in diffusing dot shape such as 0.5 to 1. And, at first, we designed diffusing dots shape based on the results of optical simulation and made specimen. as above condition, and acquired good result in confirming dots shape such as the value of the output rays's peak angle was around 75 degrees. And good light distribution characteristics were measured by slated spectro-radiometer. It was shown that the effective ways of designing light distribution characteristics using optical simulation such as ray tracing linear method for making general lighting using glass light guide plate.

• 복식
• /
• 제57권8호
• /
• pp.75-88
• /
• 2007

Nowadays, geometrical form expressed on costume is recognizing as a part of modeling art, at the same time is working to develop it. Also the geometrical form is affording the coinciding lifestyle and sensitivity of customers keeping their pace. As a result, our study is researching on the geometrical form that is used in the pattern, silhouette, and detail of the costume to show the texture in sense of touch and the effect of optical illusion used in variable designs, in order to present the expansion our capability of infinite development included in the study of costume. Specially, geometrical form included in sports wear is very effective since the geometrical form includes short and simple beauty as well as practical design. Thus, this study is wishing to know if satisfying the practical and psychological urge of present human beings may be applied to the golf wear market, which is a type of sport that geometrical form is sent in the fastest way in domestic market. Also we are urged to know what type of design technique is the geometrical form nowadays used and changed to discriminate the artificial commerce and improve the identity of such unique brand. The source of this thesis is wishing to investigate the specialization and the most effective geometrical shape and preference of each type in domestic golf wear goods that applied geometrical goods in $2002{\sim}2006$ and analyze its way of expression.

• 한국전산구조공학회논문집
• /
• 제27권5호
• /
• pp.345-352
• /
• 2014

본 논문에서는 아이소-지오메트릭 형상 최적설계 기법에서 얻은 CAD 정보를 직접 활용하여, 3D 프린터를 활용한 실험적 검증을 위한 시편을 제작하였다. 유한요소법에서는 요소망에 내재하는 기하학적인 근사가 응답과 설계민감도 해석에서 정밀도 문제를 발생시킨다. 더욱이 유한요소 기반 형상 최적화 과정에서는 CAD와의 정보교환이 필수적이나 그 과정에서 최적설계 정보의 손실이 발생할 수 있다. 아이소-지오메트릭 기법은 CAD에서 사용된 동일한 NURBS 기저함수와 조정점을 사용하므로 법선벡터와 곡률과 같은 엄밀한 기하학적 정보를 응답해석과 설계민감도 해석에 사용할 수 있다. 또한 최적설계 과정에서 CAD와 정보교환 없이 복잡한 형상을 손쉽게 변경할 수 있다. 그러므로 최적의 설계의 재료량을 실험적 검증을 위한 시편제작에 엄밀하게 반영할 수 있다. 굽힘 하중을 받는 단순지지 구조물에 대한 최적설계 및 실험적 검증을 통해 최적형상이 초기 형상에 비해 더 큰 강성을 가지며 실험결과와 수치 해석결과가 매우 잘 일치함을 보였다. 또한 인장력을 받는 유공판에 대한 형상 최적설계를 수행하였으며, 비접촉식 3차원 변형 측정 장치를 이용하여 초기설계에 비해 최적설계에서 구멍주변에서의 응력집중 현상이 완화됨을 확인하였다. 따라서 수치적인 방법을 활용한 최적설계가 실제 구조물에 대한 실험에서도 유효함을 입증하였다고 할 수 있다. 또한, 아이소-지오메트릭 최적설계 방법론이 기존의 유한요소법에 비해서 최적설계 결과를 제작하여 활용하는데 있어서도 훨씬 효율적이고 엄밀한 방법임을 보였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.818-821
• /
• 2004

With a rapid development in the area of micro and ultra precision technology, the micro surface machining of small size parts are explosively increased. Especially, to improve efficiency of various beams in lens and reflector, non-rotational symmetric form and several mm level heights changeable surface can be machined at a time. These geometric complex 3D surface cannot be machined by general short stroke FTS. The long stroke FTS if firmly needed to move directly several mm and have nm level positioning accuracy for the complex surface form. The long stroke FTS used linear motors to drive moving unit long and fine, aero static bearings to decrease friction and moving errors in guide way, optical linear scale with nm level resolution to measure position of FTS. Furthermore, to increase the performance of acceleration of FTS, the light material, such as AL is used for the structure and the high stiffness box type structure is selected. In this paper, the genetic algorithm approach is described to determine a set of design parameters for auto tuning. The authors have attempted to model the design problem with the objective of minimizing the error, such as variable pattern change. This method can give the better alternative than existing other method.

• 복식문화연구
• /
• 제32권3호
• /
• pp.438-451
• /
• 2024

The interlacing technique has a long history of use as a means of creative expression and persists in modern society to satisfy the individual pursuit of pastimes. This method has the developmental potential to create new trends in the future. Interlacing techniques (e.g., basketry, plaiting, braiding, and knotting) are closely related to plastic arts fields, architecture, art, and industrial design where the various interlacing practices are applied. This research uses case analysis to study the types of expression found in the formative art field wherein the interlacing technique is applied. Results reveal several expressions, including optical illusion visual type, relief surface type, porous perspective type, and object borrowing type, all of which appeared in fashion bags. The aesthetic formativeness, which appeared in the fashion bags that applied interlacing techniques, was then classified according to geometric formative beauty in a process based on rules and order. Nature-friendly formative beauty reflecting handicraft locality and omnidirectional formative beauty by disordered deconstruction and heterogeneous combination were determined. The use of interlacing techniques that show creative, unique combinations and variations is expected to inspire the development and application of bag design that suits individual and original modern fashion trends. One limitation of this thesis is that it only studied cases appearing in modern fashion bags.