• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.3
• /
• pp.251-260
• /
• 2005

The Development of CCD has contributed to great advancement in mapping technology with giving benefits to research community of photogrammetry. The purpose of this paper is to find the best selection of interpolation method for creating a terrain model form close range digital photogrammetry. T-test as a kind of statistical analysis was conducted to analyze the similarity of hydraulic model with close range digital photogrammetry and trigonometric leveling. Also, many interpolation methods such as inverse distance, kriging, nearest neighbor and TIN about the hydraulic model interpolation were conducted to compare the results for computer to display actual terrain an optimum interpolation of the digital elevation model form close range digital photogrammetry. The results revealed that kriging and TIN interpolation were efficient methods to judge the hazard interpolation law by analyzing geometric similarity of hydraulic model against hydraulic model application.

• Journal of Biosystems Engineering
• /
• v.33 no.1
• /
• pp.30-37
• /
• 2008

Dynamic excitation and response analysis is an acceptable method to determine some of physical properties of agricultural product for quality evaluation. There is a difference in the internal viscoelasticity between sound and defective fruits due to the difference of geometric structures, thereby showing different vibration characteristics. This study was carried out to develop a portable piezoelectric film-based glove sensor system that can separate internally damaged watermelons from sound ones using an acoustic impulse response technique. Two piezoelectric sensors based on polyvinylidene fluoride (PVDF) films to measure an impact force and vibration response were separately mounted on each glove. Various signal parameters including number of peaks, energy ratio, standard deviation of peak to peak distance, zero-crossing rate, and integral value of peaks were examined to develop a regression-estimated model. When using SMLR (Stepwise Multiple Linear Regression) analysis in SAS, three parameters, i.e., zeros value, number of peaks, and standard deviation of peaks were selected as usable factors with a coefficient of determination ($r^2$) of 0.92 and a standard error of calibration (SEC) of 0.15. In the validation tests using twenty watermelon samples (sound 9, defective 11), the developed model provided good capability showing a classification accuracy of 95%.

• Journal of Korea Multimedia Society
• /
• v.15 no.6
• /
• pp.794-804
• /
• 2012

For the geometric computations on the protein molecules, the proximity queries, such as computing the minimum distance from an arbitrary point to the molecule or detecting the collision between a point and the molecule, are essential. For the proximity queries, the efficiency of the computation time can be different according to the data structure used for the molecule. In this paper, we present the data structures and algorithms for applying proximity queries to a molecule with GPU acceleration. We present two data structures, a voxel map and a sphere tree, where the molecule is represented as a set of spheres, and corresponding algorithms. Moreover, we show that the performance of presented data structures are improved from 3 to 633 times compared to the previous data structure for the molecules containing 1,000~15,000 atoms.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.4
• /
• pp.1-7
• /
• 2010

Recently, the damage of the farmhouse has been increased due to frequent collapsing accidents of the pipe greenhouse caused by the heavy snow load derived from unusual weather phenomena. However, the study about it is rare and tenuous so that the damage is happened repeatedly. Although there are a few ways to improve the greenhouse such as increasing section, decreasing the distance between rafters in order to avoid the collapsing accidents, those ways have some shortcomings like cost and frame ratio increase, etc. Therefore, this study performed the large displacement analysis considering geometric non-linearity on each load level with respect to many kind of reinforcement methods and analyzed combined strength ratio and stress so as to search the ways, which enhance the structural stability of greenhouse and minimize the frame ratio increase. As a result, this paper is aimed at suggesting the optimal reinforcement method model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.8
• /
• pp.453-458
• /
• 2014

In this paper, we propose a stereo image composition method based on Poisson image editing. If we synthesize images without considering their depth values, it may lead to unwanted consequences. When we segment an image into its background and foreground regions using Grabcut, we take into account their geometric positions to mix color tones; thus, the image is composited more naturally. After synthesizing images, we apply a blurring operation around object boundaries; then, the foreground object and background are composited more seamlessly. In addition, we can adjust the distance of the object by setting arbitrary depth values and generating right color and depth images automatically. Experimental results show that the proposed stereo image composition method provides naturally synthesized stereo images. Improved portions were subjectively confirmed as well.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.22 no.2
• /
• pp.117-136
• /
• 2020

The purpose of this study is to analyze changes in high-tech fashion along with the types and characteristics of high-tech fashion that have appeared recently providing diverse material for the fashion field. High-tech fashion requires such research to learn how much distance one has in one's life. It is also meaningful to predict what direction high-tech fashion research may be needed. For research methods, previous research and literary studies were considered and photographs in which high-tech techniques were used were collected using the keyword 'high-tech fashion'. High-tech fashion types can be organized into the four types of luminescent types, mutual interaction types, 3D printing fashion, and virtual fashion. The research results were as follows. First, luminescent fashion was an important expression method of high-tech fashion. Materials for luminescent fashion first started with LED electric wire connections and many methods have been attempted with the appearance of electrically conductive clothing material, such as luminescent lasers and beam projectors. Second, interactive high-tech fashion often appears as variable fashion. The work of Hussein Chalayan, which was combined with advanced technology, set up a base for variable type interactive high-tech fashion in the 2000s. As bioengineering technology has developed, fashion that interacts with the environment without an energy source has appeared and the interaction among fashion, people, and the environment can be seen. Third, diverse forms of expressiveness in virtual reality such as 3D CLO shows a great difference with past high-tech fashion. Simple and diverse attempts made through virtual fittings reduce the limitations of time and space, permit interaction, and add a sense of reality through speed and dynamic physical beauty. Fourth, 3D printed fashion expresses complex and detailed clothing material that is different from those before with the development of computer 3D modeling technology. Modeling that can imitate geometric and bio-engineered structures is possible and mysterious feelings are passed on to people through creative expressions.

• 전자공학회논문지 IE
• /
• v.46 no.1
• /
• pp.31-36
• /
• 2009

This study was to simulate it that the sending receiving vehicles run on the general national roads with the one-way two-lanes at 80[km/h] speed. This study was to select 280[m] radius of curvature based on the statistical data with high rate of traffic accidents, 140[m] length of direct roads considering the stopping stadia, 90[m] length of curve, and 8 points of curved roads at 11.25[m] intervals. As a result above, when the distance between the sending and receiving vehicles became more than 111[m], the propagation path of reflected wave by the adjacent vehicles became longer than the propagation path of reflected wave by the left/right reflectors because the number of repeated reflection increased. In this study, the repeated reflection for the propagation's reach to the receiving vehicles was about $1{\sim}2$[times] as it supposed it less than 111[m]. Accordingly, it found out that the propagation path of reflected wave received through the left/right reflectors was about $1{\sim}1.5[m]$ larger than the reflected wave produced by the adjacent vehicles regardless of lanes on which the sending and receiving vehicles were located.

• Journal of Environmental Health Sciences
• /
• v.39 no.4
• /
• pp.346-353
• /
• 2013

Objectives: The goal of this study is to identify the distribution of the foliar fluorine content of vegetation surrounding the area where hydrofluoric acid was accidently released in Gumi, Gyeongsangbuk-do on September 27, 2012. In addition, it also aims to estimate the concentration of hydrogen fluoride in the air on the day of the accident. Methods: Samples of plant leaves were collected on October 7, 2012 within 1 km from the site where the accident occurred. These samples were analyzed for soluble fluorine ion with an ion selective electrode. The ambient concentration of hydrogen fluoride was calculated using the fluoride content in the plant via the dose-rate equation (${\Delta}F$=KCT). Results: The arithmetic and geometric means of the concentrations were 2158.2 and 1183.7mg F $kg^{-1}$ for leaves and, 2.4 and 1.1 ppm HF for the air, respectively. The highest concentration of hydrogen fluoride in the air was 14.7 ppm, which is higher than the maximum concentration reported by the government (1 ppm) and the exposure limit (ceiling, 3 ppm). The concentrations of both fluorine and hydrogen fluoride decreased with increasing distance from the accident site and showed a significant decrease outside of a 500m radius from the site (p <0.05). Conclusions: The area around the accident site was highly polluted with hydrogen fluoride according to the results of this study. Considering the persistency of hydrogen fluoride in the environment, long-term monitoring and environmental impact assessment should be pursued.

• Journal of Power System Engineering
• /
• v.5 no.2
• /
• pp.22-29
• /
• 2001

This paper represents axial mean velocity, turbulent kinetic energy and swirl number based on momentum flux measured in the X-Y plane and Y-Z plane respectively of a cone type gas swirl burner by using X-probe from the hot-wire anemometer system. This experiment is carried out at flow rates 350 and $450{\ell}/min$ respectively, which are equivalent to the combustion air flow rate necessary for heat release 15,000 kcal/hr in gas furnace, in the test section of a subsonic wind tunnel. Axial mean velocities and turbulent kinetic energies show that their maximum values exist centering around narrow slits situated radially on the edge of and in the forefront of a burner until $X/R{\fallingdotseq}1.5$, but they have a peculiar shape like a starfish diffusing and developing into inward and outward of a burner by means of the mixing between flows ejected from narrow slits, an inclination baffle plate and swirl vanes respectively according to downstream regions. Moreover, they show a relatively large value in the inner region of 0.5$S_m$ obtained by integration of velocity profiles shows a characteristic that has an inflection point composing of the maximum and minimum value until X/R<3, but shows close agreement with the geometric swirl number after a distance of X/R=3.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.1
• /
• pp.53-64
• /
• 2016

The double split tee connection, a type of beam-to-column moment connection, exhibits different behavioral characteristics according to changes in the thickness of the T-stub flange, the gauge distance of the high-strength bolt, and the number and diameter of high-strength bolts. In general, the double split tee connection is idealized and designed so that a T-stub fastened to the top and bottom supports a flexural moment, and a shear tab supports a shear force. However, if the double split tee connection is applied to low-and medium-rise steel structures, the size of the beam member becomes small, and thus the shear tab cannot be bolted to the web of a beam. In this regard, this study was conducted to propose connection details to ensure that the double split tee connection with a geometric shape can display sufficient shear resisting capacity. To this end, experiments were conducted using full-scale specimens for the double split tee connection.