• 제목/요약/키워드: Geoinformation

검색결과 215건 처리시간 0.026초

Engineering Geological Characteristics of Freeze-Thaw Weathered Gneiss in the Wonju Area, Korea

  • Um, Jeong-Gi;Woo, Ik;Park, Hyuck Jin
    • 지질공학
    • /
    • 제24권2호
    • /
    • pp.161-169
    • /
    • 2014
  • We present the results of an experimental physical weathering study that focuses on fresh and slightly weathered gneiss samples from the Wonju area of Korea. The study investigated changes in the physico-mechanical properties of these samples during accelerated laboratory-based weathering, including analyses of microfracture formation. The deteriorated samples used in the study were subjected to 100-150 freeze-thaw cycles, with index properties and microfracture geometries measured between each cycle. Each complete freeze-thaw cycle lasted 24 hours, and consisted of 2 hours of saturation in a vacuum chamber, 8 hours of freezing at $-21^{\circ}C{\pm}1^{\circ}C$, and 14 hours of thawing at room temperature. Specific gravity and seismic velocity values were negatively correlated with the number of freeze-thaw cycles, whereas absorption values tended to increase. The amount of deterioration of the rock samples was dependent on the degree of weathering of the rock prior to the start of the analysis. Absorption, specific gravity, and seismic velocity values can be used to infer the amount of physical weathering experienced by a gneiss in the study area. The sizes and density of microfracture in the rock specimens varied with the number of freeze-thaw cycles. We found that box fractal dimensions can be used to quantify the formation and propagation of microfracture in the samples. In addition, these box fractal dimensions can be used as a weathering index for the mid-and long-term prediction of rock weathering. The present results indicate that accelerated-weathering analysis can provide a detailed overview of the weathering characteristics of deteriorated rocks.

Parametric Analysis of the Solar Radiation Pressure Model for Precision GPS Orbit Determination

  • Bae, Tae-Suk
    • 한국측량학회지
    • /
    • 제35권1호
    • /
    • pp.55-62
    • /
    • 2017
  • The SRP (Solar Radiation Pressure) model has always been an issue in the dynamic GPS (Global Positioning System) orbit determination. The widely used CODE (Center for Orbit Determination in Europe) model and its variants have nine parameters to estimate the solar radiation pressure from the Sun and to absorb the remaining forces. However, these parameters show a very high correlation with each other and, therefore, only several of them are estimated at most of the IGS (International GNSS Service) analysis centers. In this study, we attempted to numerically verify the correlation between the parameters. For this purpose, a bi-directional, multi-step numerical integrator was developed. The correlation between the SRP parameters was analyzed in terms of post-fit residuals of the orbit. The integrated orbit was fitted to the IGS final orbit as external observations. On top of the parametric analysis of the SRP parameters, we also verified the capabilities of orbit prediction at later time epochs. As a secondary criterion for orbit quality, the positional discontinuity of the daily arcs was also analyzed. The resulting post-fit RMSE (Root-Mean-Squared Error) shows a level of 4.8 mm on average and there is no significant difference between block types. Since the once-per-revolution parameters in the Y-axis are highly correlated with those in the B-axis, the periodic terms in the D- and Y-axis are constrained to zero in order to resolve the correlations. The 6-hr predicted orbit based on the previous day yields about 3 cm or less compared to the IGS final orbit for a week, and reaches up to 6 cm for 24 hours (except for one day). The mean positional discontinuity at the boundary of two 1-day arcs is on the level of 1.4 cm for all non-eclipsing satellites. The developed orbit integrator shows a high performance in statistics of RMSE and positional discontinuity, as well as the separations of the dynamic parameters. In further research, additional verification of the reference frame for the estimated orbit using SLR is necessary to confirm the consistency of the orbit frames.

중력모델을 적용한 미세먼지 흐름 패턴 시공간 시각화 (Spatio-temporal Visualization of PM10 Flow Pattern Using Gravity Model)

  • 이건우;염재홍
    • 한국측량학회지
    • /
    • 제37권6호
    • /
    • pp.417-426
    • /
    • 2019
  • 이 연구에서는 미세먼지 시공간 변화 표현의 단점을 개선하고자 미세먼지를 흐름으로 시각화하였다. 일반적으로 미세먼지 흐름 시각화는 농도 분포와 바람장을 중첩해 표현하지만 도시 단위 이하 국지적 이동의 경우 바람과 미세먼지 이동이 다를 수 있으므로 바람장을 사용하는 것이 적합하지 않을 수 있다. 제시하는 시각화 방법론은 미세먼지 자료에서 직접 흐름 정보를 추출한다는 점에서 기존 연구와 차별성을 갖는다. 공간 상호작용을 설명하는 중력모델을 확장한 흐름 추출 방법을 미세먼지 자료에 적용하여 미세먼지 분포 변화에서 흐름 정보를 추출하였다. 이를 위해 공간보간법을 이용하여 미세먼지 분포도를 작성하였으며 추출된 미세먼지 흐름 정보를 물방울 모양의 움직이는 입자를 이용해 동적으로 시각화하였다. 산업 및 교통 활동이 시작하는 오전 5~7시 시간대를 대상으로 서울시 미세먼지 평균 흐름을 시각화하였으며 미세먼지 요인 중 하나인 교통정보와 연계하여 시각적으로 관련성을 분석하였다.

GEOMETRY OF SATELLITE IMAGES - CALIBRATION AND MATHEMATICAL MODELS

  • JACOBSEN KARSTEN
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
    • /
    • pp.182-185
    • /
    • 2005
  • Satellite cameras are calibrated before launch in detail and in general, but it cannot be guaranteed that the geometry is not changing during launch and caused by thermal influence of the sun in the orbit. Modem satellite imaging systems are based on CCD-line sensors. Because of the required high sampling rate the length of used CCD-lines is limited. For reaching a sufficient swath width, some CCD-lines are combined to a longer virtual CCD-line. The images generated by the individual CCD-lines do overlap slightly and so they can be shifted in x- and y-direction in relation to a chosen reference image just based on tie points. For the alignment and difference in scale, control points are required. The resulting virtual image has only negligible errors in areas with very large difference in height caused by the difference in the location of the projection centers. Color images can be related to the joint panchromatic scenes just based on tie points. Pan-sharpened images may show only small color shifts in very mountainous areas and for moving objects. The direct sensor orientation has to be calibrated based on control points. Discrepancies in horizontal shift can only be separated from attitude discrepancies with a good three-dimensional control point distribution. For such a calibration a program based on geometric reconstruction of the sensor orientation is required. The approximations by 3D-affine transformation or direct linear transformation (DL n cannot be used. These methods do have also disadvantages for standard sensor orientation. The image orientation by geometric reconstruction can be improved by self calibration with additional parameters for the analysis and compensation of remaining systematic effects for example caused by a not linear CCD-line. The determined sensor geometry can be used for the generation? of rational polynomial coefficients, describing the sensor geometry by relations of polynomials of the ground coordinates X, Y and Z.

  • PDF

확률론적 해석기법을 이용한 보은지역의 사면재해 안정성분석 (Stability Analysis of Landslides using a Probabilistic Analysis Method in the Boeun Area)

  • 정남수;유광호;박혁진
    • 지질공학
    • /
    • 제21권3호
    • /
    • pp.247-257
    • /
    • 2011
  • 본 연구는 사면재해 취약성 평가를 위해 사면모델 중 하나인 무한사면 해석모델을 적용하였다. 그러나 무한사면 해석모델은 광역적인 연구지역에 적용하는데 있어서 데이터획득 및 처리과정에 어려움이 있고 데이터 획득과정에서 불가피하게 불확실성이 개입되는 문제가 있다. 이러한 불확실성을 최소화하기 위해 확률론적 해석기법인 몬테카를로 시뮬레이션을 적용하였으며, 광역적인 연구지역에 무한사면 해석모델을 적용하기 위하여 GIS를 활용한 무한사면 안정해석법으로 파괴확률을 획득하였다. 연구지역으로는 사면재해가 집중적으로 발생한 보은지역을 선정하였고 사면의 기하학적인 특성과 점착력 및 내부마찰각 등의 강도정수를 획득하였다. 또한 불확실성의 효과를 평가하기 위해 강도정수의 변동계수를 10%에서 30%로 고려하였고 이러한 과정을 통하여 확률론적 해석기법은 자료의 불확실성을 감쇠시킬 수 있다는 결과를 도출하였다.

지구 곡률을 고려한 중력의 정밀 지형보정 (Precise Terrain Torrection for Gravity Measurement Considering the Earth's Curvature)

  • 최광선;이영철;임무택
    • 한국지구과학회지
    • /
    • 제28권7호
    • /
    • pp.825-837
    • /
    • 2007
  • 한국 국립해양조사원의 수심자료와 미국 NIMA((National Imagery and Happing Agency)의 수치지형자료를 바탕으로 우리나라 일원에서 측정한 중력의 지형보정을 위한 위도 및 경도 간격이 각각 $3"{\times}3"$)인 지형자료를 재편집하였다. 이 자료를 바탕으로 지구 곡률을 고려한 정밀 지형보정값을 계산하기 위한 알고리즘을 개발하였고, 중력측정점으로부터 반지름 166.735 km인 원 내부에 대한 지형보정값을 계산하는 Fortran프로그램을 작성하였다. 이 알고리즘 및 프로그램을 이용하여 남한 전역에 대한 지형보정값을 계산하였다. 그 결과 최대값은 56.508 mGal 이고 평균값은 4.539 mGU이다.

CHIME 연대 측정의 간섭 보정 계수 결정과 표준 물질의 준비를 위한 실험실 표준법 (A Working Standard Technique far Determination of Interference Correction Factors and Preparation of Standard Materials for CHIME Dating)

  • 조등룡
    • 한국지구과학회지
    • /
    • 제27권5호
    • /
    • pp.521-527
    • /
    • 2006
  • CHIME 연대측정을 위한 전자현미분석(EPMA)에서는 통상적으로 핵 연료 물질 등 구하기 어렵고 관리에 민감한 표준 물질을 사용하므로 이를 구하지 못하는 실험실에서는 적용에 어려움이 있다. 이 연구에서는 이러한 표준 물질을 대신할 수 있는 새로운 실험실 표준법을 제시한다. CHIME 연대 측정이 원활하게 이루어지고 일련의 표준 물질이 잘 구비된 실험실에서 X선 세기가 균질함이 확인된 모나자이트와 같은 광물편을 대상으로 보정 상수를 정확히 구하고, Th, U 등의 특성 X선 세기를 측정해두면, 다른 실험실에서는 단지 광물편의 특성 X선 세기를 측정하는 것만으로 바로 사용할 수 있는 표준 물질로 활용할 수 있다. 이 기법은 전자 현미 분석에서 화학성분과 X선 간섭 보정 계수의 결정에 필요한 표준 물질로 모두 활용이 가능하며, 광물 표준 물질의 복잡한 화학 성분에 대해 독립적이다.

국내 지구공원 적지 가능성 연구: 변산반도 국립공원 (A Study on the Possibility as a Site for Geopark in Korea: Byeonsanbando National Park)

  • 허철호
    • 한국지구과학회지
    • /
    • 제28권1호
    • /
    • pp.136-141
    • /
    • 2007
  • 유네스코의 지구과학분과는 세계적으로 지구과학적 유산을 알리기 위해 지구공원 프로그램을 개발해왔다. 본인은 한국에서 최초의 지구공원으로 변산반도국립공원을 제안하며 지구공원의 지정을 가능케하는 증거들을 제시하고자 한다. 변산반도 국립공원은 지질학적, 지형학적, 생태적, 문화적 자원들을 보유하고 있다는 장점이 있다. 채석강과 적벽강에는 과학적 흥미를 유발하는 많은 지질 및 지형학적 자원들이 부존되어 있다. 게다가, 변산반도 국립공원은 844종의 야생식물과 550종의 야생동물을 보유하고 있는 생태계의 보고이다. 내소사의 고려 동종과 개암사의 대웅전을 포함해서 문화유산도 풍부하다. 유네스코의 지구공원으로 지정되기 위해서는 환경부산하의 국립공원관리공단과 관련 지방자치단체 주도하에 지질, 지형, 생태, 문화자원외에도 지질관광의 운영계획도 요구된다. 상기한 조건들이 충분히 충족되면, 지구공원의 전지구적 네트워크가 한국에서 최초로 구축되리라 생각된다.

Re-Os 동위원소 시스템의 원리와 한반도 하부지각맨틀의 연령 (Principles of Re-Os Isotopic System and Dating the Age of the Subcontinental Lithospheric Mantle Beneath Korean Peninsula)

  • 이승렬
    • 암석학회지
    • /
    • 제15권2호
    • /
    • pp.106-117
    • /
    • 2006
  • Re-Os 동위원소 시스템은 $^{187}Re$$\beta^-$ 방출에 의해 $^{187}Os(\lambda=1.67\times10^{-11}year^{-1})$으로 방사성 붕괴를 하는 것을 이용한 것이며, 다양한 우주화학과 지구화학 분야에 널리 활용되고 있다. 과거 10여 년 간 발전된 원소분리기법과 기기분석방법의 발달로 인해 현재는 Sm-Nd, Rb-Sr, U-Th-Pb 동위원소 시스템과 함께 절대연령측정과 동위원소지시자로 널리 활용되고 있다. 이 논문은 Re-Os 동위원소 시스템의 일반적인 원리와 이 시스템이 널리 활용되는 분야 중 하나인 하부지각맨틀의 생성연령을 구하는 방법에 대해 한반도 남부 알칼리 현무암에 포획되어 산출하는 맨틀포획암을 대상으로 실시된 Re-Os 동위원소 자료를 이용하여 소개한다.

EFFICIENCY AND COHERENCE IMPROVEMENT FOR MULTI APERTURE INTERFEROGRAM (MAl)

  • Jung, Hyung-Sup;Lee, Chang-Wook;Park, Wook;Kim, Sang-Wan;Nguyen, Van Trung;Won, Joong-Sun
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
    • /
    • pp.629-632
    • /
    • 2007
  • While conventional interferometric SAR (InSAR) technique is an excellent tool for displacement observation, it is only sensitive to one-dimensional deformation along the satellite's line-of-sight (LOS). Recently, a multiple aperture interferogram (MAI) technique has been developed to overcome this drawback. This method successfully extracted along-track displacements from InSAR data, based on split-beam InSAR processing, to create forward- and backward- looking interferograms, and was superior to along-track displacements derived by pixel-offset algorithm. This method is useful to measure along-track displacements. However, it does not only decrease the coherence of MAI because three co-registration and resampling procedures are required for producing MAI, but also is confined to a suitable interferometric pair of SAR images having zero Doppler centroid. In this paper, we propose an efficient and robust method to generate MAI from interferometric pair having non-zero Doppler centroid. The proposed method efficiently improves the coherence of MAI, because the co-registration of forward- and backward- single look complex (SLC) images is carried out by time shift property of Fourier transform without resampling procedure. It also successfully removes azimuth flat earth and topographic phases caused by the effect of non-zero Doppler centroid. We tested the proposed method using ERS images of the Mw 7.1 1999 California, Hector Mine Earthquake. The result shows that the proposed method improved the coherence of MAI and generalized MAI processing algorithm.

  • PDF