• Journal of Astronomy and Space Sciences
• /
• v.41 no.1
• /
• pp.17-23
• /
• 2024

The safety of electronic components used in aerospace systems against cosmic rays is one of the most important requirements in their design and construction (especially satellites). In this work, by calculating the dose caused by proton beams in geostationary Earth orbit (GEO) orbit using the MCNPX Monte Carlo code and the MULLASSIS code, the effect of different structures in the protection of cosmic rays has been evaluated. A multi-layer radiation shield composed of aluminum, water and polyethylene was designed and its performance was compared with shielding made of aluminum alone. The results show that the absorbed dose by the simulated protective layers has increased by 35.3% and 44.1% for two-layer (aluminum, polyethylene) and three-layer (aluminum, water, polyethylene) protection respectively, and it is effective in the protection of electronic components. In addition to that, by replacing the multi-layer shield instead of the conventional aluminum shield, the mass reduction percentage will be 38.88 and 39.69, respectively, for the two-layer and three-layer shield compared to the aluminum shield.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.687-698
• /
• 2010

Borehole drilled depend on the point is bound to be limited to obtain the 2-D or 3-D layer information for entire targer area. On the other hand, SASW and MASW provide the sectional form of layer information through the shear wave velocity($V_s$). Therefore the useful information of the target area can be derived from SASW, MASW and borehole data. In this research, the correlation reflected locality and nationwide between sectional geo-layer and $V_s$ was investigated and analyzed. The target areas are westside of Pyeongtaek and Incheon. The shear wave velocity($V_s$) obtained from SASW, MASW and borehole data conducted within the scope of crossline for survey was utilized in each region. In the 2D distribution of $V_s$ from SASW, MASW, $V_s$ tend to continually increase deeper and deeper. By the target area, the depth of each representative geo-layer was nested on the sectional distribution map of $V_s$ to suggest the range of $V_s$ in accordance of strata by using borehole data. The 2D sectional geo-layer distribution map is presented based on the range of $V_s$. In addition the correlation between measured and calculated $V_s$ according to the empirical equation was analyzed.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.8
• /
• pp.53-66
• /
• 2022

The national ground survey database (GeoInfo) distributes numerous ground survey data nationwide. Many standard penetration test results exist in this database; however, the number of shear wave velocity (V_S) data is small. Hence, to use abundant standard penetration test-N values to predict V_S, this study proposed a new empirical N-V_S relationship model using GeoInfo data. The proposed N-V_S model is a single equation regardless of geological layer types; the layer type only specifies the upper limit of V_S. To validate the proposed model, residual analysis was performed using a test dataset that was not used for the model development. Therefore, this study's proposed model performed better than N-V_S models from previous studies. Since the N-V_S model in this study was developed using sufficient data from GeoInfo, we expect that it is the most applicable to GeoInfo dataset for V_S prediction.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5360-5376
• /
• 2017

In this paper, we study the cross-layer design for the AMC/HARQ-based wireless networks, and propose a new dynamic transmission-mode selection scheme to improve system spectrum efficiency. In the proposed scheme, dynamic thresholds for transmission-mode selection in each packet transmission and retransmission are jointly designed under the constraint of the overall packet error rate. Comparing with the existing schemes, the proposed scheme is inclined to apply higher modulation order at the first several (re)transmissions, which corresponds to higher-rate transmission modes thus higher average system spectrum efficiency. We also extend the cross-layer design to MIMO (Multi-input Multi-output) communication scenarios. Numerical results show that the proposed new dynamic transmission-mode selection scheme generally achieves higher average spectrum efficiency than the conventional and existing cross-layer design.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.1
• /
• pp.5-19
• /
• 2010

Geo-layer information is important to determine pile length and estimate residual settlement in the construction site. An overall spatial distribution of geo-layers in the entire construction site can be predicted using drill-log information. In this study, the geo-layer distribution at Song-do area was estimated by kriging and inverse distance weighting methods, and a cross validation was adopted to verify the reliability of estimation results. The analysis results indicate that the best fitted theoretical variogram model to the experimental variogram does not always provide the most reliable estimation in the kriging method. The proper $\alpha$ value of inverse distance weighting method must be determined by types of geo-layer, because the $\alpha$ value is affected by types of geo-layer. Results of the kriging method show more reliable results than those of inverse distance weighting method, and the structure of geo-layer distribution could be evaluated by variogram in the kriging method.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.2
• /
• pp.55-68
• /
• 2006

For the reliable prediction of spatial geotechnical data, a procedure to build the Geotechnical Information System (GTIS) based on geo-knowledge within the frame of GIS technology was developed by introducing a couple of new concepts of the extended area containing the study area and the additional site visit for acquiring surface geological data. To build the GTIS for Gyeongju as the case study of regional model application, intensive site investigations and pre-existing geotechnical data collections were performed and additional site visit was also carried out for acquiring surface geo-layer data in accordance with the developed procedure. Within the GTIS based on geo-knowledge for Gyeongiu area, the spatially distributed geo-layers across the extended area were predicted using the geostatistical kriging method and those for the study area were extracted. Furthermore, the spatial distribution maps for the thickess of geo-layers and the depth to bedrock were constructed for the practical use in geotechnical field. It was evaluated that the GTIS based on geo-knowledge developed in this study is superior to the conventional geotechnical GIS in terms of both the standard deviation and the geological expert judgment.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.97-106
• /
• 2019

This study was conducted to propose a reasonable requirement regulation of barrier system of rubble mound revetment offshore landfill for preventing contaminant leakage. The barrier is composed with bottom layer and side barrier. The bottom layer was assumed as impermeable clay layer and side barrier was composed with HDPE sheet (primary element) and mid-protection layer (supplementary element). Seepage-advection-dispersion numerical analysis has been conducted using SEEP/W and CTRAN/W programs under steady flow. As the results, the minimum required barrier regulations for hydraulic conductivity and thickness of the bottom layer were suggested. For side barrier, the extended length of HDPE sheet and the hydraulic conductivity of mid-protection layer were also suggested.

• Journal of the Korean GEO-environmental Society
• /
• v.3 no.1
• /
• pp.57-66
• /
• 2002

Generally, the California Bearing Ratio(CBR) for the material of subgrade is estimated without considering the anti-frost layer into the subgrade layer when pavements are designed. A pavement structure is determined according to the CBR. However, recently the design method taking the anti-frost layer into the subgrade layer is getting prevail. It makes the top of the subgrade layer strengthen and the thickness of the road pavement structure decreased. By the way, some confusion may be caused because theoretically the general equation for the mean CBR to combine the material of the subgrade layer and anti-frost layer have not been developed well. In this paper, laboratory and field CBR tests were performed to estimate of the mean CBR for the subgrade layer including the anti-frost layer. From the basis of the test results, modified equation which is calculating the mean CBR of the subgrade layer has been proposed. Finally, economical efficiency was considered by comparing the pavement thickness with the road pavement design using CBR of the subgrade layer alone and the road pavement design using the mean CBR including the anti-frost layer.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.45-48
• /
• 2008

Since the mid-2000, so-called Web 2.0 paradigm was emerged and has been widely extended to actual Web markets with supporting Web technologies. Among Web 2.0 services, mashups with Open APIs is regarded as one of core technologies. Web mapping is also the most dominant mashup application in Open API-based applications, so that various mashups with Google Map API and other Open APIs are developing. In this paper, current technological status is explained with web GIS file formats of KML. While, a prototype is web-based GIS layer authoring system for general users, without any kinds of GIS tools and external spatial databases. This mashup application will be used web-based feature extraction for geo-spatial web for public users.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.235-237
• /
• 2003

GIS became increasingly important in information-oriented society as social indirect capital and many GIS data are developed. To use these data effectively standard format that enables easy to transport and store is needed. For this purpose, OGC developed GML based on XML as web standard format of geographical information. In this study, web based mapping with respect to digital geologic map and gravity anomaly map was accomplished using GML. While, styling methods were implemented in XSLT to make the visualizing suitable for the character of each layer, so it is possible to make dynamic maps in the SVG. GML-base map produced in this study can be transferred and represented without loss of the meaning and degrading on the web.