• Journal of Microbiology and Biotechnology
• /
• v.30 no.4
• /
• pp.505-514
• /
• 2020

The symbiotic nature of the relationship between algae and marine bacteria is well-studied among the complex microbial interactions. The mutual profit between algae and bacteria occurs via nutrient and vitamin exchange. It is necessary to analyze the genome sequence of a bacterium to predict its symbiotic relationships. In this study, the genome of a marine bacterium, Pseudoruegeria sp. M32A2M, isolated from the south-eastern isles (GeoJe-Do) of South Korea, was sequenced and analyzed. A draft genome (91 scaffolds) of 5.5 Mb with a DNA G+C content of 62.4% was obtained. In total, 5,101 features were identified from gene annotation, and 4,927 genes were assigned to functional proteins. We also identified transcription core proteins, RNA polymerase subunits, and sigma factors. In addition, full flagella-related gene clusters involving the flagellar body, motor, regulator, and other accessory compartments were detected even though the genus Pseudoruegeria is known to comprise non-motile bacteria. Examination of annotated KEGG pathways revealed that Pseudoruegeria sp. M32A2M has the metabolic pathways for all seven vitamin Bs, including thiamin (vitamin B1), biotin (vitamin B7), and cobalamin (vitamin B12), which are necessary for symbiosis with vitamin B auxotroph algae. We also identified gene clusters for seven secondary metabolites including ectoine, homoserine lactone, beta-lactone, terpene, lasso peptide, bacteriocin, and non-ribosomal proteins.

• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.22-27
• /
• 2018

In this study, the effect of physical properties of $Pt/TiO_2$ on $NH_3$-selective catalytic oxidation (SCO) reaction at $200{\sim}350^{\circ}C$ was investigated. CO-chemisoption and BET analysis were carried out to verify physical properties of $Pt/TiO_2$. By characterizing physical properties of $Pt/TiO_2$ with respect to the Pt loading, the metal dispersion degree decreased as a function of the Pt loading amount. Also, the catalyst having a higher metal dispersion showed an excellent conversion efficiency of $NH_3$ to $N_2$. Since the specific surface area of the support affects the metal dispersion, $Pt/TiO_2$ catalysts were prepared using $TiO_2$ with different physical properties. As a result, it was confirmed that the catalyst having a wide specific surface area exhibited a excellent conversion of $NH_3$ to $N_2$.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.8
• /
• pp.711-719
• /
• 2016

In this study, we derived an theoretical equation, using a simplified spring-mass model for the rolling stock, to obtain the overriding behavior of a leading vehicle, which is considered as the main factor in train accidents. To verify the derived equation, we created a simple 2D model based on the theoretical model, and a simple 3D model considering the characteristics of the power bogie. We then compared the theoretical results with the simulation results obtained using LS-DYNA. The maximum relative derivations in the vertical displacements at the first end-buffer, which is the most important point in overriding, were 3.5 [%] and 1.7 [%] between the two results. Further, we evaluated collision-induced overriding displacements using the theoretical equation for a rubber draft gear, a hydraulic buffer under various collision conditions. We have suggested a theoretical approach for the realization of overriding collision accidents or the energy absorption design of the front end of trains.

• Journal of Korean Society for Geospatial Information Science
• /
• v.6 no.1 s.11
• /
• pp.11-17
• /
• 1998

Recently, 3D GIS based on 3D geo-processing methodology and Internet environment are emerging issues in GIS fields. To design and implement 3D GIS, the strategic linkage of Java and VRML is first regarded: 3D feature format definition in the passion of conventional GIS including aspatial attributes, 3B feature indexing, 3D analytical operators such as selection, buffering, and Near, Metric operation such as distance measurement and statistical description, and 3D visualization. In 3D feature format definition, the following aspects are implemented: spatial information for 3D primitives extended from 2D primitives, multimedia data, object texture or color of VRML specification. DXF-format GIS layers with additional attributes are converted to 3D feature format and imported into this system. While, 3D analytical operators are realized in the form of 3D buffering with respect to user-defined point, line, polygon, and 3D objects, and 3D Near functions; furthermore, 'Lantern operator' is newly introduced in this 3D GIS. Because this system is implemented by Java applet, any client with Java-enable browser including VRML browser plug-in can utilize the new style of 3D GIS function in the virtual space. Conclusively, we present prototype of WWW-based 3D GIS, and this approach will be contribute to development of core modules on the stage of concept establishment and of real application model in future.

• The Journal of Engineering Geology
• /
• v.24 no.4
• /
• pp.487-499
• /
• 2014

While the vertical open type of heat exchanger is more effective in areas of abundant groundwater, and is becoming more widely used, the heat exchanger most commonly used in geothermal heating and cooling systems in Korea is the vertical closed loop type. In this study, we performed numerical simulations of the optimal utilization of geothermal energy based on the hydrogeological and thermal properties to evaluate the efficiency of the vertical open type in areas of abundant groundwater supply. The first simulation indicated that the vertical open type using groundwater directly is more efficient than the vertical closed loop type in areas of abundant groundwater. Furthermore, a doublet system with separated injection and extraction wells was more efficient because the temperature difference (${\Delta}$) between the injection and extraction water generated by heat exchange with the ground is large. In the second simulation, we performed additional numerical simulations of the optimal utilization of geothermal energy that incorporated heat transfer, distance, flow rate, and groundwater hydraulic gradient targeting a single well, SCW (standing column well), and doublet. We present a flow diagram that can be used to select the optimal type of heat exchanger based on these simulation results. The results of this study indicate that it is necessary to examine the adequacy of the geothermal energy utilization system based on the hydrogeological and thermal properties of the area concerned, and also on a review of the COP (coefficient of performance) of the geothermal heating and cooling system.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.187-187
• /
• 2009

Opening of fractures induced by shear dilation or normal deformation can be a significant source of fracture permeability change in fractured rock, which is important for the performance assessment of geological repositories for spent nuclear fuel. As the repository generates heat and later cools the fluid-carrying ability of the rocks becomes a dynamic variable during the lifespan of the repository. Heating causes expansion of the rock close to the repository and, at the same time, contraction close to the surface. During the cooling phase of the repository, the opposite takes place. Heating and cooling together with the, virgin stress can induce shear dilation of fractures and deformation zones and change the flow field around the repository. The objectives of this work are to examine the contribution of thermal stress to the shear slip of fracture in mid- and far-field around a KBS-3 type of repository and to investigate the effect of evolution of stress on the rock mass permeability. In the first part of this study, zones of fracture shear slip were examined by conducting a three-dimensional, thermo-mechanical analysis of a spent fuel repository model in the size of 2 km $\times$ 2 km $\times$ 800 m. Stress evolutions of importance for fracture shear slip are: (1) comparatively high horizontal compressive thermal stress at the repository level, (2) generation of vertical tensile thermal stress right above the repository, (3) horizontal tensile stress near the surface, which can induce tensile failure, and generation of shear stresses at the comers of the repository. In the second part of the study, fracture data from Forsmark, Sweden is used to establish fracture network models (DFN). Stress paths obtained from the thermo-mechanical analysis were used as boundary conditions in DFN-DEM (Discrete Element Method) analysis of six DFN models at the repository level. Increases of permeability up to a factor of four were observed during thermal loading history and shear dilation of fractures was not recovered after cooling of the repository. An understanding of the stress path and potential areas of slip induced shear dilation and related permeability changes during the lifetime of a repository for spent nuclear fuel is of utmost importance for analysing long-term safety. The result of this study will assist in identifying critical areas around a repository where fracture shear slip is likely to develop. The presentation also includes a brief introduction to the ongoing site investigation on two candidate sites for geological repository in Sweden.

• Journal of Elementary Mathematics Education in Korea
• /
• v.14 no.1
• /
• pp.153-176
• /
• 2010

The purpose of this study is to rethink the importance of manipulative materials and to extract of manipulative materials program and its application methods. Activity, construction, and operation is stressed in the elementary mathematics. For this, various technological tools and manipulative materials is emphasized in mathematics teaching-learning methods. Applications of manipulative materials in the elementary mathematics is gradually increased together with curriculum revisions and textbook developments. As a result, tangram, geo-board etc., many tools ate introduces to school mathematics. This study is executed in this contexts. To achieve this, We introduce Australian 'Maths With Attitude' program. This program is composed of the primary level and secondary level. Each level consists of four domains - Number & Computation, Space & Logic, Chance & Measurement, Pattern & Algebra -, and each domains is made up of 20 tasks(i.e. manipulative materials) and programs. This study takes the focus to 5-6 grades programs in the mid of the primary level. First, We introduce 'Monkeys & Bananas'(Number & Computation) and 'Triangles & Colours' (Pattern & Algebra) tasks, and investigate the examples of lessons using these tasks. Second, We think the probability of these tasks' application and draw examples in the elementary mathematic textbooks. Through this works, We respect teaching-learning methods is rich and various in the elementary mathematics lessons.

• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.537-543
• /
• 2003

As pyrite is commonly associated with arsenopyrite, the use of pyrite including arsenopyrite for medicine requires close attention on arsenic toxicity. The toxicity was reduced by traditional processing operations include heating and quenching in vinegar. To verify the scientific effects of this process, pyrite containing many crystals of arsenopyrite was processed at temperatures from 45$0^{\circ}C$ to 85$0^{\circ}C$ and through as many as 5 processing cycles. Arsenopyrite completely disappeared when processed only once at $650^{\circ}C$ while it remained even after 5 processing cycles at 45$0^{\circ}C$. Arsenic was most abundant in medicinal mineral samples processed at 45$0^{\circ}C$ and sharply decreased when processed at $650^{\circ}C$ or 85$0^{\circ}C$ And arsenic extraction test in water was carried out from the processed pyrite medicine on the assumption that pyrite medicines with the lowest As metal content would be most desirable. Arsenic were most abundant in water extracted from medicinal mineral samples processed at 45$0^{\circ}C$ and sharply decreased when processed at $650^{\circ}C$ or 85$0^{\circ}C$. But the extracted As concentrations in water exceeded drinking water standards even when processed at 85$0^{\circ}C$. Increasing temperature promoted elimination of arsenopyrite and reduction of As in medicinal minerals and the extraction solutions. But the effects of processing cycles at the same processing temperature were not clear. Heating temperature is more important than number of processing cycles for the removal of arsenic, and it is necessary to heat pyrite to over $650^{\circ}C$ to remove it.

• Journal of Korean Society of Forest Science
• /
• v.104 no.4
• /
• pp.588-597
• /
• 2015

This study was carried out to identify the reasons of the landslide by land creeping in South Korea in order to provide basic information for establishing the management plan for prevention. Total 29 sites of landslide areas caused by land creeping were observed in South Korea. Among them, the soil-composition of most frequent landslide areas occurred by land creeping was colluvium landslide as 75.9% (22 sites), followed by clay soil landslide as 10.3% (3 sites), bedrock landslide as 6.9% (2 sites), and weathered rock landslide as 6.9% (2 sites). According to the types of parental rocks, the investigated landslide areas were divided into 3 types: 1) metamorphic rocks including schist, phylite, migmatitic gneiss, quartz schist, pophyroblastic gneiss, leucocratic granite, mica schst, banded gneiss and granitic gneiss, 2) sedimentary rocks including limestone, sandstone or shale and mudstone, 3) igneous rocks such as granite, andesite, rhyolite and masanite. As a result, it was noticed that the landslides occurred mostly at the metamorphic rocks areas (13 sites; 44.8%), followed by sedimentary rock areas (12 sites; 41.4%), and igneous rock areas (4 sites; 13.8%). Looking at the direct causes of the landslide, the anthropological activities (71%) such as cut slopes for quarrying, construction of country house, plant, and road, farming of mountain top, and reservoir construction were the biggest causes of the landslides, followed by the land creeping landslides (22%) caused by geological or naturally occurred (22%), and cliff erosions (7%) by caving of rivers and valleys.

• Journal of the Economic Geographical Society of Korea
• /
• v.19 no.2
• /
• pp.173-188
• /
• 2016

This paper argues that the establishment of the Kaohsiung Export Processing Zone (KEPZ), the first EPZ in East Asia, is a compromise of cold-war geopolitical economy in the 1960s. The KEPZ is part of the liberalization policy advise of the US Aid agency which intended to push the KMT (Kuomintang) government to downsize the nationalized sectors and foster private enterprises and encourage foreign investments. However, the KMT state hesitated to embrace the advice wholeheartedly but was forced to implement selectively the policies. To meet the compromise between liberalization and control, the KMT government takes advantage of the KEPZ to grab the geoeconomic opportunities emerging from the new international division of labor in the 1960s without losing the geopolitical support from the US. The idea that zoning as a space of compromise would provide a subtle re-examination of the rise of the KEPZ which is conventionally explained by the functionalist arguments such as increase of employment opportunities, foreign investments and export by the far-sighted developmental state.