• Toxicological Research
• /
• v.13 no.3
• /
• pp.223-228
• /
• 1997

Quinones have been reported to undergo nonenzymatic reaction with thiols to generate reactive oxygens. It is therefore possible that the nonenzymatic reaction of quinones with thiols in plasma could lead to potentJared cellular toxicity or disease. When 1 mM menadione was added in plasma under pH 11.2, 7.4 and 5.0, the increase in oxygen consumption rate was the order of pH 11.2 > pH 7.4 > pH 5.0. In addition, oxygen consumption rates under plasma anticoagulated with trisodium citrate solution (pH 7.85) was significantly higher than those with acid-citrate-dextrose solution (pH 6.87). SOD and catalase reduced the rate of oxygen consumption induced by menadione in plasma. Taken together, these results suggest that the menadione-induced increased oxygen consumption was due to nonenzymatic reaction of menadione with thiols in the plasma. The presence of plasma has an additive effect on the increased oxygen consumption rates induced by the menadione treatments on our model tissue, platelets, as compared between washed platelet (WP) and platelet rich plasma (PRP). Cytotoxicity, as determined by LDH release, are well correlated with the oxygen consumption rates observed in each system and strongly suggest that menadione-induced cytotoxicity can be increased with the presence of blood plasma.

• Journal of Communications and Networks
• /
• v.7 no.2
• /
• pp.192-206
• /
• 2005

Integration of mobile networks and Internet has started with 2.5 generation of mobile cellular networks. Internet traffic is today dominant traffic type worldwide. The hanger for higher data rates needed for data traffic and new IP based services is essential in the development of future wireless networks. In such situation, even 3G with up to 2 Mbit/s has not provided data rates that are used by Internet users with fixed broadband dial-up or through wired local area networks. The solution to provide higher bit rates in wireless access network has been found in wireless LAN although initially it has been developed to extend wired LAN into wireless domain. In this paper, we propose and describe a solution created for interoperability between mobile cellular network and WLAN. The integration between two networks, cellular and WLAN, is performed on the authentication, authorization, and accounting, i.e., AAA side. For that purpose we developed WLAN access controller and WLAN AAA gateway, which provide gateway-type access control as well as charging and billing functionalities for the WLAN service. In the development process of these elements, we have considered current development stadium of all needed network entities and protocols. The provided solution provides cost-effective and easy-to-deploy PLMN-WLAN Internetworking scenario.

• Journal of ILASS-Korea
• /
• v.17 no.3
• /
• pp.134-139
• /
• 2012

The main purpose of this study is to analyze and compare the nano-particle emission characteristics by 3-different biodiesel blending rates in a CI engine. Nano-particle number density emitted from various operating conditions of compression ignition engine can be investigated by using the PPS (Pegasor Particle Sensor) system. Namely, some particle charged through the corona discharge in real-time can be measured by PPS system. Under the steady state operation of the 2.0L CRDi diesel engine with different operating condition and biodiesel blending rates, the nano-particle number density was analyzed at the downstream position of DOC system. As this research result, more engine load speed and higher the concentration of biodiesel blending rate showed that the nano-particle number density decreases. Also we found that DOC system for clean diesel engine is effectively useful instrument to reduce diesel particulate matter as resource of nano-particle generation.

• Journal of Soil and Groundwater Environment
• /
• v.23 no.6
• /
• pp.37-45
• /
• 2018

The source of Chusan Spring water in the Ulleungdo is the precipitation in the Nari caldera basin, which permeates in the Trachitic pumice and tuff area and moves downward, outflowing at the lithologic boundary between the trachyte and Nari tuff. It is known that the discharge rate of the Chusan Spring is large enough to be used for the small hydroelectric power generation, but the exact discharge rate and hydrogeologic characteristics have not been known. The discharge rates of the Spring were measured 11 times, which ranged from $15,220m^3/d$ to $36,278m^3/d$. The discharge rates, measured by the automatic level recorder, for two-year period, were $20,000{\sim}38,000m^3/d$. The variation of discharge rates did not coincide with rainfall event, but showed daily increases of $3,000{\sim}5,000m^3/d$. The annual discharge rate excluding the evapotranspiration and the surrounding stream discharge corresponded to 70.6% of the annual precipitation of the recharge area. Therefore, meteorological observations at the Nari basin, rather than the Ulleung-do meteorological station, are more appropriate to properly interpret the discharge characteristics of the Chusam Spring and the recharge rate of the basin.

• Nuclear Engineering and Technology
• /
• v.55 no.7
• /
• pp.2516-2533
• /
• 2023

Several practical methods for accelerating the depletion calculation in a GPU-based Monte Carlo (MC) code PRAGMA are presented including the multilevel spectral collapse method and the vectorized Chebyshev rational approximation method (CRAM). Since the generation of microscopic reaction rates for each nuclide needed for the construction of the depletion matrix of the Bateman equation requires either enormous memory access or tremendous physical memory, both of which are quite burdensome on GPUs, a new method called multilevel spectral collapse is proposed which combines two types of spectra to generate microscopic reaction rates: an ultrafine spectrum for an entire fuel pin and coarser spectra for each depletion region. Errors in reaction rates introduced by this method are mitigated by a hybrid usage of direct online reaction rate tallies for several important fissile nuclides. The linear system to appear in the solution process adopting the CRAM is solved by the Gauss-Seidel method which can be easily vectorized on GPUs. With the accelerated depletion methods, only about 10% of MC calculation time is consumed for depletion, so an accurate full core cycle depletion calculation for a commercial power reactor (BEAVRS) can be done in 16 h with 24 consumer-grade GPUs.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.20 no.1
• /
• pp.66-74
• /
• 2024

This study investigates the effects of temperatures and strain rates on the strength and ductility of Gr.91 (ASME Grade 91) steel which is widely being used as a heat-resistant material in Generation IV nuclear and super critical thermal power plants. The tensile behavior of modified 9Cr-1Mo (Gr.91) steel was studied for the three strain rates of 6.67×10^-5/s, 6.67×10^-4/s and 6.67×10-3/s over the temperature range from room temperature (RT) to 650℃. Experimental results showed that at specific combinations of temperatures (300~400℃) and strain rates, serrations appeared in the stress-strain curves. Concurrently, abnormal behaviors such as a plateau in yield strength and tensile strength, a minimum in ductility and negative strain rate sensitivity were observed. These phenomena were analyzed as significant characteristics of dynamic strain aging (DSA). Since this abnormal behavior in Gr.91 steel affects the material strength, it is judged that a correlation analysis between DSA and material strength should be crucial in the design and integrity evaluation of Gr. 91 steel pressure vessel and piping subjected to high-temperature loading.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.28 no.2
• /
• pp.51-57
• /
• 2014

Bumblebees are important pollinators of crops and wildflowers. The Korean native bumblebee, Bombus ignitus, undergoes one generation per year, and induction of artificial hibernation is essential for year-round rearing of the bumblebee. Keeping queens under cold treatment conditions for several mo is an effective method for terminating their diapause and promoting colony development. In the present study, we investigated how the timing and duration of chilling affect the artificial hibernation of B. ignitus queens. In the timing assessment, cold treatment was instituted at 12 d, 40 d, or 100 d after eclosion under a constant temperature of $5^{\circ}C$ and 80% humidity. The queens that entered cold treatment at 12 d after emergence evidenced the highest survival rates: 86.7% at two mo, 73.3% at three mo, and 46.4% at 4 mo. Survival rates were reduced under storage conditions at 12 d, 40 d, and 100 d after emergence. When queens were subjected to chilling at 8 d, 12 d, or 16 d after eclosion with constant 80% humidity, the queens stored at 12 d after eclosion exhibited the highest survival rates, which were 84.6 at one mo, 25.0% at two mo, and 7.9% at three mo. In regards to the duration of the cold period, the queens that hibernated for at least two mo evidenced optimal colony development rates. The rates of oviposition, colony foundation, and progeny-queen production of queens hibernated for two mo were 60.0%, 30.0%, and 13.3%, respectively. These values were 6.0 to 13.3 times higher than those in the queens that hibernated for 15 d. Therefore, a cold period of at least 2 mo applied 12 d after emergence were found to be the most favorable conditions for diapause break in B. ignitus queens.

• Korean Journal of Plant Resources
• /
• v.25 no.1
• /
• pp.63-71
• /
• 2012

To assess parameters of mating system in seed orchard, such as outcrossing rates, number of potential pollen contributors, and degree of pollen contamination, seeds, produced in '77 plot of the Japanese red pine (Pinus densiflora S et Z) seed orchard at Anmyeon island, were collected in 2007 and analysed by nSSR and cpSSR markers. Estimates of outcrossing rates ranged from 91.2 to 100% (mean 97.7%) on the basis of the analysis of cpSSR haplotypes and from 81.6 to 100% (mean 95.3%) on the basis of the analysis of nSSR genotypes. By cross checking of both DNA markers, seeds, presumed to be products of self pollination on the basis of single marker, were confirmed as outcrossed seeds, which resulted in cumulative outcrossing rates of 98.9%. On the basis of pooled cpSSR haplotype of each seed, the number of pollen contributors and paternal contribution rates were estimated as 14.8 and 0.512, respectively. In conclusion, considering pretty high level of outcrossing rates observed in a seed orchard, good genetic potential of the seeds, produced in '77 plot of the seed orchard of Japanese red pines at Anmyeon island, may be guaranteed. Investigated results from the analysis of mating system of Japanese red pines in a '77 plot of the seed orchard may also be expected to provide useful information for the management and establishment of the seed orchard of the progressive generation.

• Journal of Environmental Health Sciences
• /
• v.30 no.4
• /
• pp.320-328
• /
• 2004

A number of health hazards are generated in welding processes. In this paper, the characteristics of fumes and some other hazardous agents in welding are reviewed. Fumes in welding are generated by complex mechanism like physical ejection of particles, oxidation-enhanced vaporization, vaporization-condensation-oxidation, and spatter contribution. Fume generation rates could be described as a power function in a given process. Most of fume constituents was originated from consumables rather than base metal. The mass distribution for the welding fumes is unimodal and very small to penetrate respiratory system. So, almost fractions of fumes are classified into the respirable particulate mass. Total chromium contents in FCAW were similar to those from SMAW whereas hexavalent chromium concentrations in fume were similar to those produced from MIG welding fume. Hexavalent chromium was mostly soluble which was similar to the characteristic solubility of fume hexavalent chromium from SMAW.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.3
• /
• pp.152-157
• /
• 2005

An objected-oriented programming(OOP) technique is introduced to dispatch schedules for TWBP. Some dispatch schedules such as constrained (pre)dispatch, unconstrained (pre)dispatch, and nominal self-dispatch schedule need to be peformed to make power market work. These dispatch schedules are similar but have some differences in required constraints, needed data, and scheduling time. Therefore, it makes the scheduling program simple to introduce the OOP technique to this problem: to have each instance of the OOP perform its own dispatch scheduling. The developed program adopts linear programming(LP) as an optimization tool and could consider some crucial constraints such as power balance, generation power limits, generation ramp-rates, power limitations of transmission lines, and power system security.