• The Plant Pathology Journal
• /
• 제21권3호
• /
• pp.283-287
• /
• 2005

Since the discovery of generation of $O_2^-$ in plant, many evidence for the oxidative burst (OXB) has been accumulated in various combinations of plant and pathogen or elicitor systems. $O_2^-$ generating system responsible for the OXB was coupled with oxidation of reduced nicotinamide adenine dinucleotide phosphate (NADPH) in microsomal fraction isolated from sliced aged potato tuber slices which were treated by hyphal wall components elicitor from Phytophthora infestans (HWC). We developed new assay method for quantitative measurement of oxygen radical $O_2^-$ by using electron spin resonance (ESR) analysis during elicitor­induced OXB on the surface of plant tissues. The ESR analysis using an $O_2^-$ trapper, Tiron (1,2-dihydroxy-3,5­benzenedisulfonic acid), provided a convenient assay for detecting only $O_2^-$ during elicitor-induced OXB producing various active oxygen species (AOS) on plant tissue surface. Tiron was oxidized to Tiron semiquinon radical by $O_2^-$. Quantity of the radical signal was measured by specific spectra on ESR spectroscopy. The level of $O_2^-$ was high in from surface of potato tuber tissue treated with hyphal cell wall elicitor (HWC) from Phytophthora infestans. There was no secondary OXB induction by $H_2O_2$ treatment in plant.

• 대한치과의사협회지
• /
• 제51권8호
• /
• pp.459-467
• /
• 2013

The use of autogenous tooth bone graft material has been commercialized since 2008. Autogenous tooth bone grafts always require that the tooth of the patient be extracted, and thus, the use of graft material are limited in many cases. For solution of limitation in quantity and concurrent use of autogenous tooth bone graft material, the grafting of familial teeth has been suggested. It has the following advantages: the teeth of family members are used as bone graft materials, the genetic composition is identical, and potential genetic and infectious risks can be minimized. Because the teeth of family members are used, a good tissue affinity is obtained, and thus, superior bone generation rates compared to those observed for allogenic or xenogenic bones can be anticipated. We used familial tooth bone-graft materials for alveolar ridge augmentation, socket preservation, and maxillary sinus graft in some cases. In most cases, the impacted third molars of their children were prepared as bone graft material and were used for surgery. In one case, the impacted third molar from the patient's brother was used as bone graft material. We obtained satisfactory result and these cases are reported herein.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1108-1109
• /
• 2008

To survive in outdoor environments, photovoltaic modules rely on packaging materials to provide requisite durability. We analyzed the properties of encapsulant materials that are important for photovoltaic module packaging. Recently, the thickness of solar cell gets thinner to reduce the quantity of silicon. And the reduced thickness make it easy to be broken while PV module fabrication process. Solar cell's micro cracks are increasing the breakage risk over the whole value chain from the wafer to the finished module, because the wafer or cell is exposed to tensile stress during handling and processing. This phenomenon might make PV module's maximum power and durability down. So, when using thin solar cell for PV module fabrication, it is needed to optimize the material and fabrication condition which is quite different from normal thick solar cell process. Normally, gel-content of EVA sheet should be higher than 80% so PV module has long term durability. But high gel-content characteristic might cause micro-crack on solar cell. In this experiment, we fabricated several specimen by varying curing temperature and time condition. And from the gel-content measurement, we figure the best fabrication condition. Also we examine the crack generation phenomenon during experiment.

• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.812-828
• /
• 2010

A fuel injection system using an ECU HILS as an alternate to a vehicle test for the fuel injectors was developed. The throttle position, vehicle speed, engine speed, crank position, cam position, intake air flow, and several other sensor signals that are supplied to the ECU were measured and recorded as a data file for a vehicle driven in the FTP-75 mode in a chassis dynamometer. Electric signals that are equivalent to the sensor signals from the vehicle are reconstructed from the recorded data file using data acquisition boards, microprocessors, and computers. All sensor signals are supplied to the ECU with synchronized timing using a computer program. The findings show that the cost and time of vehicle experiments can be reduced using the ECU HILS system. Moreover, the repeatability of the generation of sensor signals can enhance the accuracy of a range of experiment related to vehicle testing. An ECU scanner that scans the sensor signals that are input to the ECU through a serial port was used to assess the accuracy of the reconstructed signals. The scanning results show good agreement with the reconstructed input signals. Injectors were connected to the ECU HILS system and were driven by the system to measure the quantity of injected fuel.

• 한국멀티미디어학회논문지
• /
• 제17권12호
• /
• pp.1484-1493
• /
• 2014

Recently, Industry 4.0 (next generation industrial revolution) designed by Germany to retain initiative in manufacturing business is actively studied. Goal of Industry 4.0 is 'Smart factory' which manages progress of production, supply logistics and services. To achieve the goal, we can construct value creation and new business model by integrating organically with production management systems which is existing and cyber-physical systems, Internet of Things, Services Internet and sensor, etc. However, if integration with production management systems does not work effectively by adding and developing new technologies, It does not have performance. Hence, in this research, we will analysis Industry 4.0 which is possible for small quantity batch production and one of the light and flexible manufacturing systems, and based on this, we will suggest methodology to horizontally integrate with production management systems.

• International Journal of Aeronautical and Space Sciences
• /
• 제9권1호
• /
• pp.100-110
• /
• 2008

It is not easy to monitor and identify all engine faults and conditions using conventional fault detection approaches like the GPA (Gas Path Analysis) method due to the nature and complexity of the faults. This study therefore focuses on a model based diagnostic method using Neural Network algorithms proposed for fault detection on a turbo shaft engine (PW 206C) selected as the power plant for a tilt rotor type unmanned aerial vehicle (Smart UAV). The model based diagnosis should be performed by a precise performance model. However component maps for the performance model were not provided by the engine manufacturer. Therefore they were generated by a new component map generation method, namely hybrid method using system identification and genetic algorithms that identifies inversely component characteristics from limited performance deck data provided by the engine manufacturer. Performance simulations at different operating conditions were performed on the PW206C turbo shaft engine using SIMULINK. In order to train the proposed BPNN (Back Propagation Neural Network), performance data sets obtained from performance analysis results using various implanted component degradations were used. The trained NN system could reasonably detect the faulted components including the fault pattern and quantity of the study engine at various operating conditions.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.708-713
• /
• 2008

Various kinds of contaminant are generated from many kinds of interior construction materials, furniture and life articles. People of today living indoor most of the time are exposed to these kinds of contaminant. In this connection, people are exerting their efforts to reduce the occurrence of contaminant from the interior finish materials. And it is the actual condition that research is being actively made on the method of reducing contaminant by performing bake-out for newly constructed housings. Bake-out is the method of temporarily increasing the generation of the harmful contaminant quantity including VOCs and Formaldehyde emitting from construction materials or finish materials by increasing the interior temperature of the newly constructed buildings or improved or repaired buildings, and then removing it by mobilizing ventilation system. In this study, the researcher measured the effect of reduced concentration according to ventilation or non-ventilation of the newly constructed but not yet resident public housings during the bake-out in order to grasp the effect of reduced interior air contaminant according to the elapse of timeat the time of bake-out.

• Environmental Engineering Research
• /
• 제22권2호
• /
• pp.175-185
• /
• 2017

As the energy and environmental problems are increasingly severe, researches about carbon dioxide emissions has aroused widespread concern. The accurate prediction of carbon dioxide emissions is essential for carbon emissions controlling. In this paper, we analyze the relationship between carbon dioxide emissions and influencing factors in a comprehensive way through correlation analysis and regression analysis, achieving the effective screening of key factors from 16 preliminary selected factors including GDP, total population, total energy consumption, power generation, steel production coal consumption, private owned automobile quantity, etc. Then fruit fly algorithm is used to optimize the parameters of least squares support vector machine. And the optimized model is used for prediction, overcoming the blindness of parameter selection in least squares support vector machine and maximizing the training speed and global searching ability accordingly. The results show that the prediction accuracy of carbon dioxide emissions is improved effectively. Besides, we conclude economic and environmental policy implications on the basis of analysis and calculation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.9-9
• /
• 2008

Recently, the thickness of solar cell gets thinner to reduce the quantity of silicon. And the reduced thickness make it easy to be broken while PV module fabrication process. This phenomenon might make PV module's maximum power and durability down. So, when using thin solar cell for PV module fabrication, it is needed to optimize the material and fabrication condition which is quite different from normal thick solar cell process. Normally, gel-content of EVA sheet should be higher than 80% so PV module has long term durability. But high gel-content characteristic might cause micro-crack on solar cell. In this experiment, we fabricated several specimen by varying curing temperature and time condition. And from the gel-content measurement, we figure the best fabrication condition. Also we examine the crack generation phenomenon during experiment.

• 한국태양에너지학회 논문집
• /
• 제25권4호
• /
• pp.21-27
• /
• 2005

This paper summarizes the results of these efforts by offering a photovoltaic system structure in 50kW middle scale applications installed in Cho-sun University dormitory roof. The combination of photovoltaic system components are interconnected and system monitoring system will be summarized for the purpose of the increasing safety in this article. This paper describes configuration of utility interactive photovoltaic system which generated electric power supplies to dormitory. In order to installing the middle or large scale photovoltaic system, It must investigated the optimal design of system, compute quantity of power generation, economic rate of return and so on. In this paper represent 50kW utility photovoltaic system examination and developed simulation results. The performance of photovoltaic system has been evaluated and analyzed with simulation. The results obtained in this research will be much useful to prior investigation for installing utility interactive photovoltaic system.