• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1201-1208
• /
• 2022

In general, to maximize the supply and efficiency of floating offshore wind power generation energy, the motion caused by wave attenuation of the substructure must be reduced. According to previous studies, the motion response was reduced due to the vortex viscosity generated by the damping plate installed in the lower structure among the waves. In this study, a 5 MW semi-submersible OC5 platform and two platforms with attenuation plates were designed, and free decay experiments and numerical calculations were performed to confirm the effect of reducing motion due to vortex viscosity. As a result of the model test, when the heave free decay tests were conducted at drop heights of 30 mm, 40 mm, and 50 mm, compared with the OC5 platform, the platform with two types of damping plates attached had relatively improved motion damping performance. In the model test and numerical calculation results, the damping plate models, KSNU Plate 1 and KSNU Plate 2, were 1.1 times and 1.3 times lower than OC5, respectively, and the KSNU Plate 2 platform showed about two times better damping performance than OC5. This study shows that the area of the damping plate and the vortex viscosity are closely related to the damping rate of the heave motion.

• Women's Studies Review
• /
• v.29 no.2
• /
• pp.139-173
• /
• 2012

This paper examines the delayed situations for gender equality in South Korean, Japanese, and Taiwanese families despite the challenge to the gender division of labor in modern society, and to analyze the contradiction between the notions of gender equality and the experiences women face in East Asia countries. Using EASS data, we analyze the effective difference over the division of household labor according to women's age and length of school time, attitude for gender division of labor, couple's labor time, and family network. In South Korea and Taiwan, men's actual ratio of household division is higher than Japanese men's. On the other hand, Japanese women's ratio of household division is the highest in spite of their progressive attitude for gender equality. It is due to the difference of women's working time among the countries. In South Korea and Taiwan, women tend to work in full time job, so that they seem to inevitably reduce the time for household labor. The family characteristics have an effect on the women's ratio of household division in Taiwan, and the feature of women's employment does in South Korea. The high percentage of three-generation household contributes to the reduction of housework burden in Taiwan. In South Korea, the higher women's education levels, the higher the women's ratio of household division. Women's weakened bargaining power for household labor is due to the relatively low level of high-educated women's economic participation in South Korea. This paper reveals the effective factors on the gender division of household labor. We propose the necessity of the macro-level analysis as well as the analysis of the personal and conjugal feature.

• Korean Chemical Engineering Research
• /
• v.61 no.2
• /
• pp.175-188
• /
• 2023

Global interest in hydrogen energy is increasing as an eco-friendly future energy that can replace fossil fuels. Accordingly, a next-generation hydrogen production technology using microorganisms, nuclear power, etc. is being developed, while a lot of time and effort are still required to overcome the cost of hydrogen production based on fossil fuels. As a way to minimize greenhouse gas emissions in the hydrocarbon-based hydrogen production process, methane direct decomposition technology has recently attracted attention. In order to improve the economic feasibility of the process, the simultaneous production of value-added carbon materials with hydrogen can be one of the most essential aspects. For that purpose, various studies on catalysis related to the quality and yield of high-value carbon materials such as carbon nanotubes (CNTs). In terms of process technology, a number of the research and development of fluidized-bed reactors capable of continuous production and improved gas-solid contact efficiency has been attempted. Recently, methane direct decomposition technology using a fluidized bed has been developed to the extent that it can produce 270 kg/day of hydrogen and 1000 kg/day of carbon. Plus, with the development of catalyst regeneration, separation and recirculation technologies, the process efficiency can be further improved. This review paper investigates the recent development of catalysts and fluidized bed reactor for methane direct pyrolysis to identify the key challenges and opportunities.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.1
• /
• pp.55-61
• /
• 2023

This study aims to develop CLSM fill material for emergency restoration using landfill coal ash. As a result of examining physical properties such as particle size distribution and fines content of landfill coal ash, bottom ash, fly ash, and general soil were mixed, and SP was found to have a density of 2.03 and a residual particle pass rate of 7.8 %. CLSM materials that secure fluidity in unit quantities without using chemical admixtures such as glidants and water reducing agents have a high risk of material separation due to bleeding. As a result of this experiment, it was found that the bleeding ratio did not satisfy the standard in the case of the specimen with a large amount of fly ash and a lot of addition of mixing water. As a result of the compressive strength test, the strength development of 0.5 MPa or more for 4 hours was found to be satisfactory for the specimens using hemihydrate gypsum with a unit binder amount of 200 or more, and the remaining gypsum showed poor strength development. Although it is judged that landfill coal ash can be used as a CLSM material, it is necessary to identify and apply the physical and chemical characteristics of coal ash buried in the ash treatment plant of each power generation company.

• Journal of Industrial Convergence
• /
• v.21 no.6
• /
• pp.43-51
• /
• 2023

This study analyzed the patent status of the outdoor exercise equipment used primarily by the elderly. The purpose is to utilize the basic data obtained to promote the health of the elderly. The information on the patent was collected from KIPRIS, an information search service provided by the Korean Intellectual Property Office. The search term used was 'outdoor exercise equipment', directly related patents were selected, and a final 157 were analyzed. As a result of the analysis, first, patent registration began in 2007, and 2-3 patents were registered on average every year. Second, patents from the perspective of sports convergence that provide an exercise prescription system using wireless communication, such as the ability to generate electricity by operating a power generation module, providing information on the user's exercise amount, or preventing the loss and theft of weights and safety accidents due to their characteristics, were searched for. Lastly, patents related to exercise equipment that can provide user convenience and increase the frequency of use of exercise equipment were searched. The results of this study confirmed that outdoor exercise equipment is being developed more for the elderly and their convenience, and that companies and public institutions are showing increased interest in outdoor exercise equipment for the elderly. In addition to patent trends analysis, follow-up research in connection with exercise programs using outdoor exercise equipment is needed to develop practical and convenient outdoor exercise equipment in the future.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1540-1554
• /
• 2023

To use nuclear energy sustainably, spent nuclear fuel, classified as high-level radioactive waste and inevitably discharged after electricity generation by nuclear power plants, must be managed safely and isolated from the human environment. In Korea, the land area is limited and the amount of high-level radioactive waste, including spent nuclear fuels to be disposed, is relatively large. Thus, it is particularly necessary to maximize disposal efficiency. In this study, a high-efficiency deep geological repository concept was developed to enhance disposal efficiency. To this end, design strategies and requirements for a high-efficiency deep geological repository system were established, and engineered barrier modules with a disposal canister for pressurized water reactor (PWR)-type and pressurized heavy water reactor type Canada deuterium uranium (CANDU) plants were developed. Thermal and structural stability assessments were conducted for the repository system; it was confirmed that the system was suitable for the established strategies and requirements. In addition, the results of the nuclear safety assessment showed that the radiological safety of the new system met the Korean safety standards for disposal of high-level radioactive waste in terms of radiological dose. To evaluate disposal efficiency in terms of the disposal area, the layout of the developed disposal areas was assessed in terms of thermal limits. The estimated disposal areas were 2.51 km² and 1.82 km² (existing repository system: 4.57 km²) and the excavated host rock volumes were 2.7 Mm³ and 2.0 Mm³ (existing repository system: 4.5 Mm³) for thermal limits of 100 ℃ and 130 ℃, respectively. These results indicated that the area and the excavated volume of the new repository system were reduced by 40-60% compared to the existing repository system. In addition, methods to further improve the efficiency were derived for the disposal area for deep geological disposal of spent nuclear fuel. The results of this study are expected to be useful in establishing a national high-level radioactive waste management policy, and for the design of a commercial deep geological repository system for spent nuclear fuels.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.4
• /
• pp.413-417
• /
• 2023

Gallium Oxide (Ga₂O₃) is preferred as a material for next generation power semiconductors. The Ga₂O₃ should solve the disadvantages of low thermal resistance characteristics and difficulty in forming an inversion layer through p-type ion implantation. However, Ga₂O₃ is difficult to inject p-type ions, so it is being studied in a heterojunction structure using p-type oxides, such as NiO, SnO, and Cu₂O. Research the lateral-type FET structure of NiO/Ga₂O₃ heterojunction under the Gate contact using the Sentaurus TCAD simulation. At this time, the VG-ID and VD-ID curves were identified by the thickness of the Epi-region (channel) and the doping concentration of NiO of 1×10¹⁷ to 1×10¹⁹ cm-3. The increase in Epi region thickness has a lower threshold voltage from -4.4 V to -9.3 V at I_D = 1×10^-8 mA/mm, as current does not flow only when the depletion of the PN junction extends to the Epi/Sub interface. As an increase of NiO doping concentration, increases the depletion area in Ga₂O₃ region and a high electric field distribution on PN junction, and thus the breakdown voltage increases from 512 V to 636 V at I_D =1×10^-3 A/mm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.630-633
• /
• 2021

Microphones can convert received voice signals to electric signals. They have been widely used in various industries such as radios, smart devices and vehicles. Recently, the demands for small size and high sensitive microphones are increased according to the minimization of wireless earphone with the development of smart phone. A MEMS system is a good candidate for an ultra-small size microphone of a next generation and a read out IC for high sensitive MEMS sensor is researched from many industries and academies. Since the microphone system has a high sensitivity from environment noise and electric system noise, the system requires a low noise power supply and some low noise design techniques. In this paper, a low noise LDO is presented for small size MEMS microphone systems. The input supply voltage of the LDO is 1.5-3.6V, and the output voltage is 1.3V. Then, it can support to 5mA in the light load condition. The integrated output noise of proposed LDO form 20Hz to 20kHz is about 1.9uV. These post layout simulation results are performed with TSMC 0.18um CMOS technology and the size of layout is 325㎛ × 165㎛.

• Asia Marketing Journal
• /
• v.10 no.4
• /
• pp.99-121
• /
• 2009

Social networks can be a powerful force in marketing because they provide new ways to market to young generation. Though many studies on evaluation of customer lifetime value have been conducted, it is not clear how to assess the value of members within social networks. The purpose of this study is to evaluate members based on customer intangible value as well as customer lifetime value. Customer network value in terms of the power and influence within a network is analyzed through network structure analysis. Using Cyworld log file data, this study have shown that high percentage of members are very influential in terms of spreading or withholding information even though their CLV is low. It is expected that the findings of this research contribute to understand the interactive behaviors of members within networks and to provide valuable implications on new product launching and customer management strategies to marketers.

• Journal of the Economic Geographical Society of Korea
• /
• v.26 no.2
• /
• pp.96-109
• /
• 2023

Recently, there has been a lot of discussion about the regional pricing of electricity and electricity self-sufficiency. In Korea, power generation facilities are highly ubiquitous and there is an imbalance between electricity production and consumption regions. So it is proposed to charge different price by region, instead of the current nationwide uniform price, and the regional electricity self-sufficiency rate is proposed as a criterion for identifying electricity production and consumption regions. However, many discussions set the spatial unit for measuring electricity self-sufficiency by 17 Si·Do, which needs to be analyzed for its appropriateness. In this study, we analyzed the electricity self-sufficiency rate using 17 provinces and 229 Si·Gun·Gu as the spatial unit. As a result of the analysis, there are 7 and 10 electricity producing and consuming regions at Si·Do level, but 38 and 191 at Si·Gun·Gu level. In addition, although the electricity self-sufficiency rate measurement has the advantage of identifying electricity production and consumption areas in a simple and intuitive way, we points out that it has some problems with the criteria for regional pricing of electricity.