• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.386-389
• /
• 2006

BIPV(Building Integrated PV) system can expect dual effects that reduce expenses for establishment of PV system by adding new function as outer covering material of building expect producing the electricity. In case of PV(photovoltaic system) there are many generation differences according to the exterior environmental facts(solar cell array, design and installation condition of interactive inverter system). In this paper, we compared constitute factors of 3kW BIPV(solar cell module, inverter), operating characteristic and total system characteristic(utilization, generation efficiency, loss fact) and found out long time operating data using a watch instrumentations. By use of long time operating result, compare a totally operating characteristics, and we proposed a next building application of BIPV. BIPV system that is proposed in this paper, was established in Solar Energy research center of Chosun University, composed with system. The objective of this paper, is to provide a efficient BIPV design method through the considerations for the integration of PV system.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1177-1179
• /
• 2003

Recently, the ground-based laser profiler is used for acquisition of 3D spatial information of a rchaeological objects. However, it is very difficult to measure complicated objects, because of a relatively low-resolution. On the other hand, texture mapping can be a solution to complement the low resolution, and to generate 3D model with higher fidelity. But, a huge cost is required for the construction of textured 3D model, because huge labor is demanded, and the work depends on editor's experiences and skills . Moreover, the accuracy of data would be lost during the editing works. In this research, using the laser profiler and a non-calibrated digital camera, a method is proposed for the automatic generation of 3D model by integrating these data. At first, region segmentation is applied to laser range data to extract geometric features of an object in the laser range data. Various information such as normal vectors of planes, distances from a sensor and a sun-direction are used in this processing. Next, an image segmentation is also applied to the digital camera images, which include the same object. Then, geometrical relations are determined by corresponding the features extracted in the laser range data and digital camera’ images. By projecting digital camera image onto the surface data reconstructed from laser range image, the 3D texture model was generated automatically.

• 한국멀티미디어학회논문지
• /
• 제13권6호
• /
• pp.901-910
• /
• 2010

$IP^2$, as an extended concept of the next generation IMT network, is a concept of basically supporting mobility using two steps of IP address (i.e. IPha (IP Host address) and IPra (IP routing address)) in IP backbone network. Current $IP^2$system has a shortcoming of excess usage of network resources caused by sending paging messages to all cells in LA (Location Area) in paging procedure. Considering the evolving direction of network, which is taking mobility with various speed and integration of devices into consideration, this shortcoming must be overcome. In this paper, we proposed a method to reduce time and memory for paging by maintaining current information of MN (Mobile Node) not in Active state with proxy server. Performance evaluation based on NS-2 simulations has shown that the efficiency of network resources is improved in the proposed method.

• 한국산학기술학회논문지
• /
• 제10권2호
• /
• pp.280-286
• /
• 2009

NGN(Next-Generation Network)의 구조는 전 IP 유무선 통합망으로서 다양한 관점에서 연구되어져왔으며 이러한 네트워크의 성능은 가장 중요한 쟁점의 하나이다. 본 연구에서는 다양한 유무선 통합망에서 음성 서비스를 제공할 때에 발생할 수 있는 문제점과 요인들을 발견하기 위하여 OPnet 시뮬레이터를 활용하여 성능분석을 수행하였다. 단일의 유선망이나 무선망과는 달리 유무선 통합망에서만 보이는 특성을 측정하고 분석하였다. 특히, 유무선 통합망에서는 네트워크의 전송이 빈번하지 않은 환경에서도 전반적인 망의 성능이 저하되는 결과를 측정하였으며 그밖에도 노드수의 증가와 전송량의 변화에 따른 망의 성능을 비교 분석하였다.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1571-1578
• /
• 2013

With the emergence of high-integration array and large area panel process, the need to minimize the generation of particles in the field of semiconductor, LCD and OLED has grown. As an alternative to the conventional roller system, a contactless magnetic conveyor has been proposed to reduce the generation of particles. An EM-PM hybrid which is one of magnetic levitation types is already proposed for the conveyor system. One of problems pointed out with this approach is the vibration caused by the dynamic interaction between conveyor and rail. To reduce the vibration, the introduction of a secondary suspension system which aims to decouple the levitation electromagnet from the main body is proposed. The objective of this study is to develop a dynamic model for the magnetically levitated conveyor, and to investigate the effect of the introduced suspension system. An integrated model of levitation system and rail based on 3D multibody dynamic model is proposed. With the proposed model, the dynamic characteristics of maglev conveyor system are analyzed, and the effect of the secondary suspension and the stiffness and damping are investigated.

• 정보관리학회지
• /
• 제24권1호
• /
• pp.75-101
• /
• 2007

기술 환경의 변화는 문헌정보시스템의 혁신적인 변화를 촉진하고 있다. 본 연구에서는 문헌 정보 체계기술과 인터넷 정보기술을 융합된 차세대 문헌 정보 시스템의 원형으로 시맨틱 라이브러리를 정의하고, 시맨틱 라이브러리의 기능적 요구사항과 아키텍처의 참조모델을 제시하였다. 시맨틱 라이브러리는 온톨로지와 메타데이터 기반의 의미적 상호 운용성과 통합을 실현하고 정보 자원의 개방과 공유 참여와 협업을 통하여 이용자 정보서비스를 혁신하는 체제이다. 또한 시맨틱 라이브러리는 FRBR의 논리구조를 근간으로 하여 서비스 지향 아키텍처로 구현됨으로써 효과적으로 시스템을 구축을 실현할 수 있다. 본 연구에서는 차세대 문헌정보 시스템의 모델로 6개 수평 계층과 3개 수직요소로 구성되는 시맨틱 라이브러리의 참조 모델을 제시하였다.

• Journal of Communications and Networks
• /
• 제2권1호
• /
• pp.35-45
• /
• 2000

this paper presents the concept of "mobile ATM', a proposal for third-generation (3G) mobile communication network infrastructure capable of supporting flexible evolution of radio technologies from today's cellular and data services towards future wireless multimedia services. Mobile ATM provides generic mobility management and QoS-based transport capabilities suitable for integration of multiple radio access technologies including cellular voice. wireless data, and future broadband wireless services. The architecture of a mobile ATM network is outlined in terms of the newly-defined "W-UNI" interface at the radio link and "M-UNI"and "M-UNI" interface which supports unified access for WATM and non-ATM mobile terminals through corresponding interworking functions (IWF) is explained. leading to an understanding of how different radio access technologies are supported by the same ATM-based core network infrastructure. Generic mechanisms for handoff and location management within the core mobile network are discussed. and related protocol extensions over the "W-UNI" and "M-UNI/NNI"interfaces are proposed. the issue of "crossover switch (COS)" selection in mobile ATM is considered, and a unified handoff signaling syntax which supports flexibility in COS selection is described. Typical signaling sequences for call connection and handoff using the proposed protocols are outlined. Experimental results form a proof-of-concept mobile ATM network prototype are presented in conclusion.

• 한국디지털건축인테리어학회논문집
• /
• 제6권2호
• /
• pp.9-16
• /
• 2006

The research want to know about form creation method's special quality that found in digital construction design process that using digital media, and they comparison analysis that who positive using digital media, Frank O. Gehry, Peter Eisenman, Greg Lynn, UN studio's work. First, In digital design process using digital media is make full use to design unfolding step and application way can change by architect's recognition difference of using digital media and each architect's design general idea unfolding process, and it means form creation process can change. Second, In digital design process a building form doesn't design adaptation to construction system, they directly design the third dimension form. So, they deduction a new form that unification and integration. Third, the architect that appear's in digital design process's part is existing, data from position of the master which it selects the coding selects the outcome goods which appears in computer operation with coordinator role of the originality and construction sense which it is visible.

• 대한기계학회논문집B
• /
• 제33권5호
• /
• pp.299-310
• /
• 2009

Fuel cells are expected to be promising future power sources in both aspects of thermal efficiency and environmental friendliness. Accordingly, worldwide research and development efforts have been enormously increasing recently in various applications such as power plants, transportation and portable power sources. Among others, high temperature fuel cells, such as solid oxide fuel cells and molten carbonate fuel cells, are suitable for electric power plants. Moreover, their high operating temperature is quite appropriate to construct further advanced integrated systems. This paper reviews recent literatures on research and development of integrated power generation systems based on high temperature fuel cells. Research and development efforts are summarized in the area of fuel cell/ gas turbine hybrid systems, application of carbon capture technology to fuel cell systems, integration of coal gasification with fuel cells, and the use of alternative fuels.

• Journal of Power Electronics
• /
• 제17권5호
• /
• pp.1308-1316
• /
• 2017

The distributed maximum power point tracking (DMPPT) concept is widely adopted in photovoltaic systems to avoid mismatch loss. However, the high cost and complexity of DMPPT hinder its further promotion in practice. Based on the concept of DMPPT, this paper presents an integrated submodule level half-bridge stack structure along with an optimal current point tracking (OCPT) control algorithm. In this full power processing integrated solution, the number of power switches and passive components is greatly reduced. On the other hand, only one current sensor and its related AD unit are needed to perform the ideal maximum power generation for all of the PV submodules in any irradiance case. The proposal can totally eliminate different small-scaled mismatch effects in real-word condition and the true maximum power point of each PV submodule can be achieved. As a result, the ideal maximum power output of the whole PV system can be achieved. Compared with current solutions, the proposal further develops the integration level of submodule DMPPT solutions with a lower cost and a smaller size. Moreover, the individual MPPT tracking for all of the submodules are guaranteed.