• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.65-72
• /
• 2006

In new generation vehicle technologies, a fuel cell vehicle becomes more important, by virtue of their emission merits. In addition, a fuel cell is considered as a major source to generate the electricity for vehicles in near future. This paper focuses on modeling of not only an electric vehicle and but also a fuel cell vehicle to estimate performances. And an EV cart is manufactured to verify the modeling. Speed, voltage, and current of the vehicle and modeling are compared to estimate them at acceleration test and driving mode test. The estimations are also compared with the data of the Ballard Nexa fuel cell stack. In order to investigate a fuel cell based vehicle, motor and fuel cell models are integrated in a electric vehicle model. The characteristics of individual components are also integrated. Calculated fuel cell equations show good agreements with test results. In the fuel cell vehicle simulation, maximum speed and hydrogen fuel consumption are estimated. Even though there is no experimental data from vehicle tests, the vehicle simulation showed physically-acceptable vehicle characteristics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.3
• /
• pp.411-417
• /
• 2018

This paper proposes and implements an on-line instruction manual system which can generate the instruction manual page for the target device at the smartphone on the spot. The instruction manual app. on smartphone scans a QR code or reads NFC tag attached in the instruction manual management module embedded in the target device, and receives instruction manual data from the instruction manual management module through the Bluetooth communications and finally shows the refined instruction manual pages on the smartphone display using a Web-based templates. For the evaluation we embedded the instruction manual management module for an industrial generator with its instruction manual data. Assuming a circumstance of blackout we show that the proposed system can reduce the repair work within two steps compared to three steps in the existing one without the proposed system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1897-1903
• /
• 2011

This paper discusses a 2D/3D conversion of images using technologies like object extraction and depth-map creation. The general procedure for converting 2D images into a 3D image is extracting objects from 2D image, recognizing the distance of each points, generating the 3D image and correcting the image to generate with less noise. This paper proposes modified new methods creating a depth-map from 2D image and recognizing the distance of objects in it. Depth-map information which determines the distance of objects is the key data creating a 3D image from 2D images. To get more accurate depth-map data, noise filtering is applied to the optical flow. With the proposed method, better depth-map information is calculated and better 3D image is constructed.

• Journal of KIISE:Software and Applications
• /
• v.34 no.7
• /
• pp.681-687
• /
• 2007

Face recognition technique is very popular for a personal information security and user identification in recent years. However, the face recognition system is very hard to be implemented due to the difficulty where change in illumination, pose and facial expression. In this paper, we consider that an illumination change causing the variety of face appearance, virtual image data is generated and added to the D-LDA which was selected as the most suitable feature extractor. A less sensitive recognition system in illumination is represented in this paper. This way that consider nature of several illumination directions generate the virtual training image data that considered an illumination effect of the directions and the change of illumination density. As result of experiences, D-LDA has a less sensitive property in an illumination through ORL, Yale University and Pohang University face database.

• Journal of Korea Water Resources Association
• /
• v.49 no.10
• /
• pp.863-876
• /
• 2016

Climate change projections for precipitation are in general provided at daily time step. However, sub-daily precipitation data is necessarily required for hydrologic design and management. Thus, a reliable downscaling model is needed to analyze impact of climate change on water resources. While daily downscaling models have been widely developed and applied in hydrologic and climate community, hourly downscaling models have not been properly developed. In this regard, this study aims at developing a hourly downscaling model that can better reproduce sub-daily extreme rainfalls using conditional copula model. The proposed model was applied to generate extreme rainfalls under the RCP 8.5 scenario for weather stations in South Korea, and design rainfalls were then finally provided. We expected that the future design rainfalls can be used for baseline data to evaluate impact of climate change on water resources.

• KCID journal
• /
• v.14 no.1
• /
• pp.80-88
• /
• 2007

The Shuttle Radar Topography Mission (SRTM) obtained elevation data on a near-global scale to generate the most complete high-resolution digital topographic database of Earth. SRTM consisted of a specially modified radar system that flew onboard the Space shuttle SRTM consisted of a specially modified radar system that flew onboard the Space Shuttle Endeavour during an 11-day mission on February 2000. Since 2004, in a GLCF (Global Land Cover Facility, http;//glcf.umiacs.umd.edu/) web-site, products of SRTM including 1Km and 90m resolutions for outside US and a 30m resolution for the US have been provided. This study is to assess the accuracy of SRTM-DEM in comparing with NGIS-DEM generated from NGIS digital topographic map(1:25,000) in Guem river watershed. For the Geum river watershed, SREM-DEM elevation ranged from 0 to 1,605m and NGIS-DEM ranged from 6 to 1,610m, and the average elevation of SRTM-DEM was 226.7m and 218.9m for NGIS-DEM, respectively. NGIS-DEM was subtracted from SRTM in three zones -Zone I (0~100m), Zone II (100~400m), Zone III (over 400m)- to estimate difference between SRTM and NGIS-DEM. As the results, the differences of these DEM were 5.2m (11.6%) in Zone I, 8.8m (3.8%) in Zone II, 12.5m (2.1%) in Zone III. Although there were differences between SRTM-DEM and NGIS-DEM, SREM-DEM would be possible to be utilized as DEM data for the region where DEM is not prepared.

• Journal of Advanced Navigation Technology
• /
• v.24 no.4
• /
• pp.305-313
• /
• 2020

Telemetry system is a system that transmits status information data acquired from the aircraft to the ground station. PCM encoder needs memory to store channel information in order to generate a frame format using the acquired data. Generally, telemetry systems in large aircraft require much larger memory for the increased acquisition channel information due to the increased sensors and subsystems. However, they have difficulty to store all channel information in limited memory. In this paper, we suggests and implements an advanced PCM encoder that can efficiently manage memory by minimizing duplicated channel information. This novel PCM encoder allocates duplicated channel information to memory only once. And, sub commutation channels having different information for each minor frame are allocated to the memory by multiples of sub commutation channels. Finally, the suggested PCM encoder was proved by simulation that composed channels of various measurement cycles.

• The KIPS Transactions:PartC
• /
• v.11C no.5
• /
• pp.621-632
• /
• 2004

Recent measurement studies of real teletraffic data in modern telecommunication networks have shown that self-similar (or fractal) processes may provide better models of teletraffic in modern telecommunication networks than Poisson processes. If this is not taken into account, it can lead to inaccurate conclusions about performance of telecommunication networks. Thus, an important requirement for conducting simulation studies of telecommunication networks is the ability to generate long synthetic stochastic self-similar sequences. A new generator of pseu-do-random self-similar sequences, based on the fractional Gaussian nois and a wavelet transform, is proposed and analysed in this paper. Specifically, this generator uses Daubechies wavelets. The motivation behind this selection of wavelets is that Daubechies wavelets lead to more accurate results by better matching the self-similar structure of long range dependent processes, than other types of wavelets. The statistical accuracy and time required to produce sequences of a given (long) length are experimentally studied. This generator shows a high level of accuracy of the output data (in the sense of the Hurst parameter) and is fast. Its theoretical algorithmic complexity is 0(n).

• Annals of Laboratory Medicine
• /
• v.38 no.6
• /
• pp.503-511
• /
• 2018

Background: Sampling a healthy reference population to generate reference intervals (RIs) for complete blood count (CBC) parameters is not common for pediatric and geriatric ages. We established age- and sex-specific RIs for CBC parameters across pediatric, adult, and geriatric ages using secondary data, evaluating patterns of changes in CBC parameters. Methods: The reference population comprised 804,623 health examinees (66,611 aged 3-17 years; 564,280 aged 18-59 years; 173,732 aged 60-99 years), and, we excluded 22,766 examinees after outlier testing. The CBC parameters (red blood cell [RBC], white blood cell [WBC], and platelet parameters) from 781,857 examinees were studied. We determined statistically significant partitions of age and sex, and calculated RIs according to the CLSI C28-A3 guidelines. Results: RBC parameters increased with age until adulthood and decreased with age in males, but increased before puberty and then decreased with age in females. WBC and platelet counts were the highest in early childhood and decreased with age. Sex differences in each age group were noted: WBC count was higher in males than in females during adulthood, but platelet count was higher in females than in males from puberty onwards (P <0.001). Neutrophil count was the lowest in early childhood and increased with age. Lymphocyte count decreased with age after peaking in early childhood. Eosinophil count was the highest in childhood and higher in males than in females. Monocyte count was higher in males than in females (P <0.001). Conclusions: We provide comprehensive age- and sex-specific RIs for CBC parameters, which show dynamic changes with both age and sex.

• Korean Journal of Remote Sensing
• /
• v.4 no.1
• /
• pp.31-40
• /
• 1988

Low-cost microcomputer systems can be assembled which possess computing power, color display, memory, and storage capacity approximately equal to graphic workstactions. A low-cost, flexible, and user-friendly IBM/PC/XT/AT based image processing system has been developed and named as KMIPS(KAIST (Korea Advanced Institute of Science & Technology) Map and Image Processing Station). It can be easily utilized by the resource managers who are not computer specialists. This system can: * directly access Landsat MSS and TM, SPOT, NOAA AVHRR, MOS-1 satellite imagery and other imagery from different sources via magnetic tape drive connected with IBM/PC; * extract image up to 1024 line by 1024 column and display it up to 480 line by 672 column with 512 colors simultaneously available; * digitize photographs using a frame grabber subsystem(512 by 512 picture elements); * perform a variety of image analyses, GIS and terrain analyses, and display functions; and * generate map and hard copies to the various scales. All raster data input to the microcomputer system is geographically referenced to the topographic map series in any rater cell size selected by the user. This map oriented, georeferenced approach of this system enables user to create a very accurately registered(.+-.1 picture element), multivariable, multitemporal data sets which can be subsequently subsequently subjected to various analyses and display functions.