• 제목/요약/키워드: Generalized state machine

검색결과 25건 처리시간 0.021초

Decomposition of T-generalized State Machines

  • 조성진;김재겸;김석태
    • 한국지능시스템학회논문지
    • /
    • 제6권4호
    • /
    • pp.27-33
    • /
    • 1996
  • In this paper we introduce the notions of T-generalized state machines and primary submachines of T-generalized state machines and obtain a decomposition theorem for T-generalized state machine in terms of primary submachines.

  • PDF

FUZZY SUBMACHINES OF A FUZZY FINITE STATE MACHINE

  • Hwang, Seok-Yoon
    • Journal of applied mathematics & informatics
    • /
    • 제19권1_2호
    • /
    • pp.457-466
    • /
    • 2005
  • In this paper we present the concepts of fuzzy submachine, which are the generalized form of crisp submachine of a fuzzy finite state machine. Also we extend the concepts of system of generators to fuzzified form.

선형 전동기 구동 시스템의 고속, 정밀 위치 제어 알고리즘의 구현 (Implementation of High Speed, Precise Position Control Algorithm for Linear Machine Drive System)

  • 이유인;김준석;김용일
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1999년도 전력전자학술대회 논문집
    • /
    • pp.139-142
    • /
    • 1999
  • Recently, the application of the linear machine for industrial field is remarkable increased, especially for the gantry machine and machine tool system. In these application, high precise position control performance is essentially required in steady/transient state. This paper presents the generalized PID position control algorithm which have rare sensitivity to mass and disturbance. Through the experimental results, it is shown that the proposed algorithm have good performance for the linear machine drives in the steady state and transient state in spite of the load mass varing.

  • PDF

DECOMPOSITIONS OF GENERALIZED TRANSFORMATION SEMIGROUPS

  • Cho, Sung-Jin;Kim, Jae-Gyeom
    • Journal of applied mathematics & informatics
    • /
    • 제6권1호
    • /
    • pp.227-238
    • /
    • 1999
  • We introduce several decompositons of generalized trans-formation semigroups and investigate some of their algebraic struc-tures.

Damping of Inter-Area Low Frequency Oscillation Using an Adaptive Wide-Area Damping Controller

  • Yao, Wei;Jiang, L.;Fang, Jiakun;Wen, Jinyu;Wang, Shaorong
    • Journal of Electrical Engineering and Technology
    • /
    • 제9권1호
    • /
    • pp.27-36
    • /
    • 2014
  • This paper presents an adaptive wide-area damping controller (WADC) based on generalized predictive control (GPC) and model identification for damping the inter-area low frequency oscillations in large-scale inter-connected power system. A recursive least-squares algorithm (RLSA) with a varying forgetting factor is applied to identify online the reduced-order linearlized model which contains dominant inter-area low frequency oscillations. Based on this linearlized model, the generalized predictive control scheme considering control output constraints is employed to obtain the optimal control signal in each sampling interval. Case studies are undertaken on a two-area four-machine power system and the New England 10-machine 39-bus power system, respectively. Simulation results show that the proposed adaptive WADC not only can damp the inter-area oscillations effectively under a wide range of operation conditions and different disturbances, but also has better robustness against to the time delay existing in the remote signals. The comparison studies with the conventional lead-lag WADC are also provided.

Generalized State-Space Modeling of Three Phase Self-Excited Induction Generator For Dynamic Characteristics and Analysis

  • Kumar Garlapati Satish;Kishore Avinash
    • Journal of Electrical Engineering and Technology
    • /
    • 제1권4호
    • /
    • pp.482-489
    • /
    • 2006
  • This paper presents the generalized dynamic modeling of self-excited induction generator (SEIG) using state-space approach. The proposed dynamic model consists of induction generator; self-excitation capacitance and load model are expressed in stationary d-q reference frame with the actual saturation curve of the machine. An artificial neural network model is implemented to estimate the machine magnetizing inductance based on the knowledge of magnetizing current. The dynamic performance of SEIG is investigated under no load, with the load, perturbation of load, short circuit at stator terminals, and variation of prime mover speed, variation of capacitance value by considering the effect of main and cross-flux saturation. During voltage buildup the variation in magnetizing inductance is taken into consideration. The performance of SEIG system under various conditions as mentioned above is simulated using MATLAB/SIMULINK and the simulation results demonstrates the feasibility of the proposed system.

초퍼 회로를 사용한 회전기계의 특성해석에 관한 연구 (A study on the rotating machine characteristics drived by chopper)

  • 이승원
    • 전기의세계
    • /
    • 제29권6호
    • /
    • pp.393-400
    • /
    • 1980
  • It is shown in this paper that it is possible to derive generalized state equations for computation of electrical circults constanining SCR and diode elements. Revankar's binary logic variable method is used for formulation of the state equation of chopper circuit. Advantage of this method is that the state equations can be set up without the exact knowledge of the circuit operaton. The different modes of operation of the circuit are identified by the computer itself. By applying this method, the steady state performances of separately excited chopper-fed dc motor considering the counter electromotive force of the motor are investigated and the results of the computer simulation are presented. There is a satisfactory agreement between the theoretical and experimental results.

  • PDF

엔트로피 지수를 이용한 기계학습 기반의 배터리의 건강 상태 예측 알고리즘 (Machine Learning Based State of Health Prediction Algorithm for Batteries Using Entropy Index)

  • 김상진;임현근;장병훈;우성민
    • 전기전자학회논문지
    • /
    • 제26권4호
    • /
    • pp.531-536
    • /
    • 2022
  • 배터리를 효율적으로 관리하기 위해서는 배터리의 건강 상태와 잔여 수명을 정확하게 추정하고 관리하는 것이 중요하다. 배터리는 같은 종류여도 설비용량 및 전압 등의 특성이 다르며 학습용 모델을 위한 배터리와 모델을 통한 예측을 위한 배터리가 서로 다를 경우에는 정확도 측정에 한계가 있다. 본 논문에서는 전압의 분포와 방전 시간을 이용한 엔트로피 지수를 일반화하고 4개의 배터리를 각각 1개씩 교차적으로 훈련 집합과 테스트 집합으로 정의하여 기계학습의 선형회귀 분석을 통하여 배터리의 건강 상태를 예측하는 방법을 제안하였다. 제안된 방법은 평균 절대값 퍼센트 오차를 이용하여 95% 이상의 높은 정확도를 나타내었다.

FSM 설계를 위한 하드웨어 흐름도와 하드웨어 기술 언어에 관한 연구 (A Study on a Hardware Folw-Chart and Hardware Description Language for FSM)

  • 이병호;조중휘;정정화
    • 대한전자공학회논문지
    • /
    • 제26권4호
    • /
    • pp.127-137
    • /
    • 1989
  • 본 논문에서는 논리 설계 자동화를 위한 레지스터 전송 레벨의 하드웨어 흐름도와 하드웨어 기술언어 SDL-II (symbolic description language)를 각각 제안한다. SDL-II는 일반화된 FSM(finite state machine)의 동작 및 구조적 특성을 제안하는 하드웨어 흐름도로 표현하고 이의 각 기호에 1대 1 대응하며 제어부와 데이타 전송부를 함께 기술하도록 구문을 설정한다. 또한 여러가지 설계 요구조건을 하드웨어 흐름도로 표현하고 이를 SDL-II로 기술하여 본 논문의 유효성을 보인다.

  • PDF