• Journal of Korean Home Economics Education Association
• /
• v.31 no.1
• /
• pp.115-136
• /
• 2019

The purpose of this study is to analyze the contents of 'housing' unit in middle school Technology-Home Economics textbooks according to the 2015 revision curriculum based on the targets of SDGs. All contents of the ten textbooks of five publishers, such as texts, photographs/figures/tables, activity tasks, and supplementary materials were analyzed in terms of SDGs targets. The number of 'housing' contents among 4 small housing units of Technology-Home Economics book 1 & 2 varied from 64 to 97 by publishers. Beside SDGs4.7, which contains inclusive and general ESDGs, 24 targets of 10 SDGs were found to be related to the contents of 'housing' and were grouped into 15 target categories. The number of SDGs target categories related to housing contents of each small unit and total of all units differed by publishers. Each of 4 small 'housing' units from all the five publishers was related to 6~10 target categories. The contents of five book 1's were related to smaller number of target categories than those of five book 2's. They corresponded to 9 and 12 target categories, consecutively. Only SDGs' target11.1 (appropriate and safe housing and basic services) was related to all the four small units of 'housing' contents among all the five publishers. covering 43.8% of the housing contents. In conclusion, the contents of the 'housing' unit were related to broad range of SDGs targets. Further study could relate goals of teaching-learning plan to various global targets of SDGs according to the contents of 'housing' in order to accomplish ESDGs.

• The Korean Journal of Financial Management
• /
• v.27 no.1
• /
• pp.181-208
• /
• 2010

In July 2007, Korean government has passed "The Capital Market and Financial Investment Services Act" to further develop the capital markets and the Act was to become effective in February 2009. Using a large sample of Korean firms, we have examined (i) the effect of underwriting activities on the firm value (bond spread) comparing commercial bank and investment bank, and (ii) the determinants of the firm value changes following underwriting activities of bank. To test our goal, we collected a wide range of samples of data for bond issuing activities executed by Korean firms listed on the Korea Stock Exchange (KSE) between 2000 and 2003. Our paper is distinguished from previous studies on this subject in a way that we analyzed the effect of corporate bond underwriting activities with regard to commercial banking and investment banking. Initially, we set up a hypothesis that "Certification View" and "Conflict-of-interest View" are major driving forces behind cross-firm differences in performance following bond issuance. We find that, in general, underwriting by investment bank (securities company) brings a positive effect on the firm value (spread between bench mark rate and bond issuing rate). This result indicates that firm value has been negatively affected by the bank underwriting and provides the evidence for "Conflict-of-interest View" in Korea. Our studies have also revealed that any change in firm value following bond issuance is positively related with the firm size (total asset), operating performance, liquidity (cashflow), and equity ownership by foreign investors. Overall, our results support the view that bank underwriting activities can play an important role in determining firm value and financial strategies under "The Capital Market and Financial Investment Services Act" of 2007.

• The Korean Journal of Elementary Counseling
• /
• v.9 no.2
• /
• pp.175-193
• /
• 2010

The aim of this study is to examine effects of a yoga program for children on school stress of the elementary school children. To achieve this goal, total 10 students out of 231 in 6 classes among the third graders in M elementary school in B city were selected as subjects for this study. After regular school hours, they participated in a children's yoga program for 16 times for 45 minutes per session in the course of 8 weeks. An ethnographic interview was conducted to identify the effects of the program. During the initial stage of the children's yoga program, the participants were interviewed preliminarily. An analysis of areas and an analysis of classifications were made based on the initial interview results, and an area classification table was drawn on the school stress perceived by the elementary school children. After the yoga program ended, a follow up interview was made to apply an analysis of components by comparing changes in the school stress level due to a yoga effect. A research report was written through a cycle of addition and supplement in which the previous data analysis was complemented and corrected by new findings of the study. As a result of the ethnographic interview to analyze the school stress perceived by the elementary school children, and an examination of the changes in the school stress level, the children's yoga program proved to be significantly effective in reducing the school stress. However there were limitations to a certain degree in stress reduction. Details of such findings in each sub-category are as follow. First, as a result of the initial interview analysis, the school stress was classified broadly into 4 categories of study stress, friendship stress, teacher stress, and school environment stress. Second, the study stress as the first category of the school stress was classified into 3 sub-categories of homework, class, and exam stresses. In spite of minor differences among 3 sub-categories, the stress was reduced in general. Third, the friendship stress as the second category of the school stress was also classified into 3 sub-categories of bullying, alienation, and performing one's duty. There were minor differences among sub-categories, however stress reduction also appeared with the exception of the performing one's duty category which had relatively little effect from the yoga program. Fourth, regarding the teacher stress as the third school stress, a classification was made into 3 sub-categories of preference, penalty, and teaching method. Minor differences among the 3 sub-categories notwithstanding, stress reduction appeared with the exception of the teaching method stress which had relatively little effect from the yoga program. Fifth, the school environment stress as the fourth category of the school stress was classified into 2 sub-categories of school meals and facilities. Minor differences between the 2 categories notwithstanding, stress reduction appeared with the facilities stress having relatively little effect.

• Journal of Korea Game Society
• /
• v.4 no.3
• /
• pp.11-20
• /
• 2004

Virtual reality that we have seen from the movies in 80's and 90's is hawing near based on the rapid progress of science together with a computer technology. Various virtual reality system developments (such as VRML, HMD FishTank, Wall Type, CAVE Type, and so on) and the advancement of those systems make for the embodiment of virtual reality that gives more sense of the real. Virtual reality is so immersive that makes people feel like they are in that environment and enable them to manipulate without experiencing the environment at first hand that is hard to experience in reality. Virtual reality can be applied to the spheres, such as education, high-level programming, remote control, surface exploration of the remote satellite, analysis of exploration data, scientific visualization, and so on. For some connote examples, there are training of a tank and an aeroplane operation, fumiture layout design, surgical operation practice, game, and so on. In these virtual reality systems, the actual operation of the human participant and virtual workspace are connected each other to the hardware that stimulates the five senses adequately to lend the sense of the immersion. There are still long way to go, however, before long it will be possible to have the same feeling in the virtual reality as human being can have by further study and effort. In this thesis, the basic definition, the general idea, and the kind of virtual reality were discussed. Especially, CAVE typed in reality that is highly immersive was analyzed in definition, and then the method of VR programming and modeling in the virtual reality system were suggested by showing the restoration process of Kyongbok Palace (as the content of the original form of the culture) that was made by KISTI(Korea Institute of Science and Technology Information) in 2003 through design process in virtual reality system. Through these processes, utilization of the immersive virtual reality system was discussed and how to take advantage of this CAVE typed virtual reality system at the moment was studied. In closing the problems that had been exposed in the process of the restoration of the cultural property were described and the utilization plan of the virtual reality system was suggested.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.1
• /
• pp.69-81
• /
• 2015

Under the premise that parks have been a performing field of welfare ideology that benefits the citizen from the past, the present study began with a basic question on what substance a park has and how it has worked. Therefore, this study tried to find out the theoretic background that can explain the roles of a park as an instrument for welfare, of which topic is currently being discussed, and examine how the ideology in the debate regarding welfare characteristics of parks are differentiated from those of social welfare. In addition, this study divided the process of development of parks defined by Galen Cranz in an attempt to view how welfare benefits offered by parks have changed in their development and looked into the roles and types of welfare functions that parks provided to the citizens under a certain social situation by period. Furthermore, the characteristics and development of the ideology underlying a welfare park were examined by function and element in its progression. The results of this study are as follows. The functions that parks have performed so far can be classified into three categories. First, they have a remedial function. Parks have given direct services to 'the socially disadvantaged' such as relief, fostering, and rehabilitation. Second, parks have played a preventive function. They aim to reinforce the functions of individual, family, group, and community. Third, they have exerted a developmental function. They function to promote change of society in a way for it to contribute to social development. Looking into the roles and functions of parks from the perspective of their beneficiary class and benefits, the following were discovered. First, the beneficiaries of welfare characteristics in parks have expanded to the general public from the poor class, and the benefits of parks have spread into the public including the underprivileged in a real sense. Second, the significance of welfare characteristics in parks has also changed from literal benefits to caring for basic human rights. Third, the purpose of welfare characteristics in parks has changed from providing minimal conditions to optimal conditions. At its beginning, the ideology of welfare in parks remained ideal, confining itself to their idealistic characteristics; but as time went on, they created several social benefits in response to various social demands, developing into a field where welfare ideology manifests and is realized in an active manner. Furthermore, it was witnessed that the parks and welfare of the present times are standing at the point of contact for participation and universal well-being. The present study reconsidered the meaning and value of parks from perspective of them as a provider of welfare benefits as well as examined how the welfare ideology of parks is connected to practice. By doing so, this study discovered the various roles, values, and ideology that parks should bear in the future. Therefore, this study is expected to be a good example for future research related to the topic.

• Economic and Environmental Geology
• /
• v.44 no.3
• /
• pp.229-238
• /
• 2011

S-wave, which provides lithology and pore fluid information, plays a key role in estimating gas-hydrate saturation. In general, P- and S-wave velocities increase in the presence of gas-hydrate and the P-wave velocity decreases in the presence of free gas under the gas-hydrate layer. Whereas there are very small changes, even slightly increases, in the S-wave velocity in the free gas layer because S-wave is not affected by the pore fluid when propagating in the free gas layer. To verify those velocity properties of the BSR (bottom-simulating reflector) depth in the gas-hydrate prospect area in the Ulleung Basin, P- and S-wave velocity profiles were derived from multi-component ocean-bottom seismic data which were acquired by Korea Institute of Geoscience and Mineral Resources (KIGAM) in May 2009. OBS (ocean-bottom seismometer) hydrophone component data were modeled and inverted first through the traveltime inversion method to derive P-wave velocity and depth model of survey area. 2-D multichannel stacked data were incorporated as an initial model. Two horizontal geophone component data, then, were polarization filtered and rotated to make radial component section. Traveltimes of main S-wave events were picked and used for forward modeling incorporating Poisson's ratio. This modeling provides S-wave profiles and Poisson's ratio profiles at every OBS site. The results shows that P-wave velocities in most OBS sites decrease beneath the BSR, whereas S-wave velocities slightly increase. Consequently, Poisson's ratio decreased strongly beneath the BSR indicating the presence of a free gas layer under the BSR.

• Economic and Environmental Geology
• /
• v.43 no.6
• /
• pp.589-601
• /
• 2010

Recently it has been frequently reported arsenic contamination of geologic origin in groundwater. The iron-impregnated ranular activated carbon (Fe-GAC) was developed for effective removal of arsenic from groundwater n the study. Fe-GACs were prepared by impregnating iron compounds into a supporting medium (GAC) with 0.05 M iron nitrate solution. The materials were used in arsenic adsorption isotherm tests to know the effect of iron impregnation time, batch kinetic tests to understand the influence of pH, and column tests to evaluate for the preliminary operation of water treatment system. The results showed that the minimum twelve hours of impregnation time were required for making the Fe-GAC with sufficient iron content for arsenic removal, confirmed by a high arsenic adsorption capacity evaluated in the isotherm tests. Most of the impregnated iron compounds were iron hydroxynitrate $Fe_4(OH)_{11}NO_3{\cdot}2H_2O$ but a mall quantity of hematite was also identified in X-ray diffraction(XRD) analysis. The batch isotherms of Fe-GAC for arsenic adsorption were well explained by Langmuir than Freundlich model and the iron contents of Fe-GAC have positive linear correlations on logarithmic plots with Freundlich distribution coefficients ($K_F$ and Langmuir maximum adsorption capacities ($Q_m$. The results of kinetic experiments suggested hat Fe-GAC had he excellent arsenic adsorption capacities regardless of all pH conditions except for pH 11 and could be used a promising adsorbents for groundwater arsenic removal considering the general groundwater pH range of 6-8. The pseudo-second order model, based on the assumption that the ate-limiting step might be chemisorption, provided the best correlation of the kinetic experimental data and explained the arsenic adsorption system f Fe-GAC. The column test was conducted to valuate the feasibility of Fe-GAC use and the operation parameters in arsenic groundwater treatment system. The parameters obtained from the column test were the retardation actor of 482.4 and the distribution coefficient of 581.1 L/mg which were similar values of 511.5-592.5 L/mg acquired from Freundlich batch isotherm model. The results of this study suggested that Fe-GAC could be used as promising adsorbent of arsenic removal in a small groundwater supply system with water treatment facility.

• Applied Biological Chemistry
• /
• v.39 no.5
• /
• pp.368-373
• /
• 1996

Korean general medicinal herbs-sasam, gilkyung, jakyak, danggwi, hwangki, and chunkung-were added In the normal brewing procedure as a raw material or in the distilling procedure as a packing material. The distillates from the former procedure and those from the latter procedure were compared in quality and distillation properties. As distillation proceeded, pH of the medicinal herb wine distillate and the control(not added herbs) distillates were decreased, whereas that of the herb packing distillate was increased slowely of $0.05{\sim}0.97$ during $1{\sim}4$ fractions and decreased remarkably of $0.92{\sim}0.98$ afterward. Average pH was the highest of 5.70 in jakyak and lowest of 4.37 In gilkyung. Absorbances of the herb Packing distillate were decreased rapidly of $0.60{\sim}1.59$ in the $1{\sim}4$ fractions but slowely of $0.19{\sim}0.54$ in the next fractions. During distillation both fractional alcohol concentration of the distillates and distillation rate were decreased. Their values were decreased more slowly than the control. Distillation rates of medicinal herb wine distillate were varied by medicinal herb varieties and alcohol concentration of fermented wine. Danggwi and control showed the highest average distillation rate as $0.12\;m{\ell}/sec$ and gilkyung the lowest value as $0.073\;m{\ell}/sec$. Maximum concentration of index component, paeoniflorin of jakyak was observed as 293 mg% in the 5th fraction of herb packing distillate and decrusin of danggwi as 3514 mg% In the 1st fraction of herb packing distillate. The extraction rate was 41.3% for paeoniflorin and 20.5% for decrusin. From sensory evaluation, the highest overall Qualify was observed in the medicinal herb wine distillate of hwangki added wine, the next in those of danggwi and jakyak added wine.

• Journal of Intelligence and Information Systems
• /
• v.21 no.1
• /
• pp.99-118
• /
• 2015

Object-oriented programming languages have been widely selected for developing modern information systems. The use of concepts relating to object-oriented (OO, in short) programming has reduced efforts of reusing pre-existing codes, and the OO concepts have been proved to be a useful in interpreting system requirements. In line with this, we have witnessed that a modern conceptual modeling approach supports features of object-oriented programming. Unified Modeling Language or UML becomes one of de-facto standards for information system designers since the language provides a set of visual diagrams, comprehensive frameworks and flexible expressions. In a modeling process, UML users need to consider relationships between classes. Based on an explicit and clear representation of classes, the conceptual model from UML garners necessarily attributes and methods for guiding software engineers. Especially, identifying an association between a class of part and a class of whole is included in the standard grammar of UML. The representation of part-whole relationship is natural in a real world domain since many physical objects are perceived as part-whole relationship. In addition, even abstract concepts such as roles are easily identified by part-whole perception. It seems that a representation of part-whole in UML is reasonable and useful. However, it should be admitted that the use of UML is limited due to the lack of practical guidelines on how to identify a part-whole relationship and how to classify it into an aggregate- or a composite-association. Research efforts on developing the procedure knowledge is meaningful and timely in that misleading perception to part-whole relationship is hard to be filtered out in an initial conceptual modeling thus resulting in deterioration of system usability. The current method on identifying and classifying part-whole relationships is mainly counting on linguistic expression. This simple approach is rooted in the idea that a phrase of representing has-a constructs a par-whole perception between objects. If the relationship is strong, the association is classified as a composite association of part-whole relationship. In other cases, the relationship is an aggregate association. Admittedly, linguistic expressions contain clues for part-whole relationships; therefore, the approach is reasonable and cost-effective in general. Nevertheless, it does not cover concerns on accuracy and theoretical legitimacy. Research efforts on developing guidelines for part-whole identification and classification has not been accumulated sufficient achievements to solve this issue. The purpose of this study is to provide step-by-step guidelines for identifying and classifying part-whole relationships in the context of UML use. Based on the theoretical work on Meta-model Formalization, self-check forms that help conceptual modelers work on part-whole classes are developed. To evaluate the performance of suggested idea, an experiment approach was adopted. The findings show that UML users obtain better results with the guidelines based on Meta-model Formalization compared to a natural language classification scheme conventionally recommended by UML theorists. This study contributed to the stream of research effort about part-whole relationships by extending applicability of Meta-model Formalization. Compared to traditional approaches that target to establish criterion for evaluating a result of conceptual modeling, this study expands the scope to a process of modeling. Traditional theories on evaluation of part-whole relationship in the context of conceptual modeling aim to rule out incomplete or wrong representations. It is posed that qualification is still important; but, the lack of consideration on providing a practical alternative may reduce appropriateness of posterior inspection for modelers who want to reduce errors or misperceptions about part-whole identification and classification. The findings of this study can be further developed by introducing more comprehensive variables and real-world settings. In addition, it is highly recommended to replicate and extend the suggested idea of utilizing Meta-model formalization by creating different alternative forms of guidelines including plugins for integrated development environments.

• Journal of Intelligence and Information Systems
• /
• v.16 no.3
• /
• pp.55-75
• /
• 2010

Sequential pattern mining aims to discover interesting sequential patterns in a sequence database, and it is one of the essential data mining tasks widely used in various application fields such as Web access pattern analysis, customer purchase pattern analysis, and DNA sequence analysis. In general sequential pattern mining, only the generation order of data element in a sequence is considered, so that it can easily find simple sequential patterns, but has a limit to find more interesting sequential patterns being widely used in real world applications. One of the essential research topics to compensate the limit is a topic of weighted sequential pattern mining. In weighted sequential pattern mining, not only the generation order of data element but also its weight is considered to get more interesting sequential patterns. In recent, data has been increasingly taking the form of continuous data streams rather than finite stored data sets in various application fields, the database research community has begun focusing its attention on processing over data streams. The data stream is a massive unbounded sequence of data elements continuously generated at a rapid rate. In data stream processing, each data element should be examined at most once to analyze the data stream, and the memory usage for data stream analysis should be restricted finitely although new data elements are continuously generated in a data stream. Moreover, newly generated data elements should be processed as fast as possible to produce the up-to-date analysis result of a data stream, so that it can be instantly utilized upon request. To satisfy these requirements, data stream processing sacrifices the correctness of its analysis result by allowing some error. Considering the changes in the form of data generated in real world application fields, many researches have been actively performed to find various kinds of knowledge embedded in data streams. They mainly focus on efficient mining of frequent itemsets and sequential patterns over data streams, which have been proven to be useful in conventional data mining for a finite data set. In addition, mining algorithms have also been proposed to efficiently reflect the changes of data streams over time into their mining results. However, they have been targeting on finding naively interesting patterns such as frequent patterns and simple sequential patterns, which are found intuitively, taking no interest in mining novel interesting patterns that express the characteristics of target data streams better. Therefore, it can be a valuable research topic in the field of mining data streams to define novel interesting patterns and develop a mining method finding the novel patterns, which will be effectively used to analyze recent data streams. This paper proposes a gap-based weighting approach for a sequential pattern and amining method of weighted sequential patterns over sequence data streams via the weighting approach. A gap-based weight of a sequential pattern can be computed from the gaps of data elements in the sequential pattern without any pre-defined weight information. That is, in the approach, the gaps of data elements in each sequential pattern as well as their generation orders are used to get the weight of the sequential pattern, therefore it can help to get more interesting and useful sequential patterns. Recently most of computer application fields generate data as a form of data streams rather than a finite data set. Considering the change of data, the proposed method is mainly focus on sequence data streams.