• Journal of Korean Society of Steel Construction
• /
• v.26 no.4
• /
• pp.335-348
• /
• 2014

For high-strength steel, it is difficult to be applied to flexible structural member because it have high yield ratio and low basic material's toughness. One of the great problems when using high-strength steel connections is the brittle fracture at the end of the beam member in common with general mild steel connections. In the cases of mild steel connections, it has be developed that special moment frame connection details by reinforcing structural member or improvement of welding access hole. But, it is incomplete at yet about applicability estimation of high-strength steel connections. This study is the initial step research for the applicability estimation of beam-to-column connections being applied to developed high-strength steel, HSA800. And, it studied about structural performance of the high-strength steel connections according to the details of welding access hole through full-scale test and analytical method.

• Steel and Composite Structures
• /
• v.34 no.4
• /
• pp.499-509
• /
• 2020

The purpose of this paper is to investigate the degradation law of stiffness of steel-concrete composite beams after certain fatigue loads. First, six test beams with stud connectors were designed and fabricated for static and fatigue tests. The resultant failure modes under different fatigue loading cycles were compared. And an analysis was performed for the variations in the load-deflection curves, residual deflections and relative slips of the composite beams during fatigue loading. Then, the correlations among the stiffness degradation of each test beam, the residual deflection and relative slip growth during the fatigue test were investigated, in order to clarify the primary reasons for the stiffness degradation of the composite beams. Finally, based on the stiffness degradation function under fatigue loading, a calculation model for the residual stiffness of composite beams in response to fatigue loading cycles was established by parameter fitting. The results show that the stiffness of composite beams undergoes irreversible degradation under fatigue loading. And stiffness degradation is associated with the macrobehavior of material fatigue damage and shear connection degradation. In addition, the stiffness degradation of the composite beams exhibit S-shaped monotonic decreasing trends with fatigue cycles. The general agreement between the calculation model and experiment shows good applicability of the proposed model for specific beam size and fatigue load parameters. Moreover, the research results provide a method for establishing a stiffness degradation model for composite beams after fatigue loading.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.4
• /
• pp.316-323
• /
• 2016

A UAV(Unmanned Aerial Vehicle) flies along pre-programed navigation points(in-flight, take-off, or landing) automatically without pilot input. Even though UAVs fly differently from general piloted aircraft as the pilot controls the aircraft from a ground station through means of a data-link system. Occasionally, the data-link connection can be lost for any number of reasons, in which case, the FLCC(Flight control Computer) must automatically switch to autopilot to continue flying. Hence, the FLCC is a flight-critical component that must be throughly tested and validated. This paper discusses the development of a HILS(Hardware in the Loop Simulation) test environment designed to simulate real flight conditions to verify the FLCC satisfies flying quality requirements and maintains robustness despite any potential malfunctions or emergency situations.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.1
• /
• pp.34-41
• /
• 2018

A flange joint is a pipe connection used to prevent the leakage of high-pressure fluids by inserting a gasket and tightening the bolts. Among several kinds of gaskets available, metal ring type joint gaskets are most widely used in conditions that require high-temperature and high-pressure fluid flow, such as oil pipelines, gas pipes, pumps, valve joints, etc. The purpose of this study is to investigate the contact pressure and stress characteristics closely related to the sealing performance of Class 900 flange joints used in high temperature and high pressure environments. The dimensions of flange joints with five different nominal pipe sizes were determined with reference to those specified in ASME 16.5. The metal ring gaskets inserted in the joints were octagonal and oval gaskets. The bolt tensile forces calculated from the tightening torques were input as the bolt pretension loads in order to determine the contact pressure and stress levels after fastening. Loading was composed of three steps, including the fastening step, and different amounts of applied pressures were used in each analysis to investigate the effect of fluid pressure on the contact force of the joints. A general-purpose software, ANSYS 17.2, was used for the analysis.

• Journal of the Korean Ceramic Society
• /
• v.34 no.8
• /
• pp.870-876
• /
• 1997

Ge-Ga-S glasses, contrary to other well-known chalcogenide glasses, show high rare-earth solubility. Raman spectra of GeS2-Ga2S3 glasses showed that two peaks at 260 cm-1 and 385 cm-1 increased in intensity with the addition of Ga2S3. These peaks are associated with the vibration of Ge-Ge bonds and edge-shared [GsS4] tetrahedra, respectively. In GeS2-Ga2S3-La2S3 glasses, the peak at 260 cm-1 decreased in intensity with addition of La2S3 and the one at 375 cm-1 due to the vibration of tetrahedra with non-bridging sulfurs increased. It indicated that La, or rare-earths in general, can easily be dissolved into the glass network as charge compensators for non-bridging sulfurs which were formed through the dissociation of Ge-Ge bonds and edge-shared [GaS4] tetrahedra. Since no such structural modification is expected in glasses as Ga-As-S, these peculiar transitions on the connection scheme in Ga-containing chalcogenide glasses seem to be playing the most important role on the enhanced rare-earth solubility.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.287-293
• /
• 2007

This paper proposed modelling and design method in suspension system design to analyze active suspension equipment by adopting intelligent robust control theory. Recent in the field of suspension system design it is general to adopt active control scheme for stiffness and damping, and connection with other vehicle stability control equipment is also intricate, it is required for control system scheme to design more robust, higher response and precision control equipment. It is known that active suspension system is better than passive spring-damper system in designing suspension equipment. We analyze suspension system with considering location of front-rear wheel and driving velocity, then design robust control system. Numerical example is shown for validity of intelligent control system design in active suspension system.

• Journal of Digital Contents Society
• /
• v.7 no.3
• /
• pp.161-168
• /
• 2006

Wibro(Wibro - Wireless Broadband Internet ) is a system that can accept effectively the IP-based Wireless data traffic with upward / downward asymmetric transfer characteristic by using a Wirelss broadband transfer technology in OFDMA/TDD (Orthogonal frequency Division Multiple Access/Time Division Duplex). Wibro service should support handover to maintain connection continuously in movement because the service is based on If system which is different from cellular system. Current Micro Mobility system and general Mobile If system has got a problem of delayed speed and lost packets during handover. IETF protocol has been proposed for minimizing this problem and its standardization is under process, mainly focused on Mip4, Mip6 and Mipshop WG. This article studies and analyzes an effective method of minimizing handover delay to improve the problem of WiBro system and its revitalization & outlook.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.1
• /
• pp.143-151
• /
• 2008

Execute IP traceback at this paper as target an intruder's attacking that Bypass Attack in order to avoid an exposure of own Real IP address Design IP traceback server and agent module, and install in Internet network system for Real IP traceback. Set up detection and chase range aggressive loop around connection arbitrariness, and attack in practice, and generate Real IP data cut off by fatal attacks after data and intrusion detection accessed general IP, and store to DB. Generate the Forensic data which Real IP confirms substance by Whois service, and ensured integrity and the reliability that buy to early legal proof data, and was devoted to of an invader Present the cyber criminal preventive effect that is dysfunction of Ubiquitous Information Society and an effective Real IP traceback system, and ensure a Forensic data generation basis regarding a judge's robe penalty through this paper study.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.47
• /
• pp.185-212
• /
• 2010

This study aims to derive practical suggestions to apply application methods by auxiliary costs, especially application of logistics and customs clearance areas in order to establish EPS support system of auxiliary cost occurred from export/import. For the propose, this study has analyzed types and situation of auxiliary costs, application method by auxiliary costs, payment situation of logistics auxiliary costs and clearance auxiliary costs and suggested the relevant problems and their application methods. Especially, in case of logistics auxiliary costs through connection to the attached general documents required for negotiation by reflecting characteristics of B2B transactions. In addition, it has suggested that those services by the said system should be conveniently used commonly by the export companies and logistics companies through provision of various payment measures, support of foreign currency payment, etc. and security of reliability/system stability, etc. for the compatible payment with other systems as the prerequisite for the successful settlement of the auxiliary costs EPS. It is expected that satisfaction of the uTradeHub users such as export/import companies and logistics companies will be increased, user-oriented customized information services such as raw cost prediction service through calculation of auxiliary costs could be available in the future and efficiency of work processes related to auxiliary costs will be increased, by providing the EPS through various single window based payment measures through establishment of the export/import auxiliary costs payment system.

• Journal of Biomedical Engineering Research
• /
• v.25 no.1
• /
• pp.1-4
• /
• 2004

On the background of general idea and technique of bioscience, medicine and engineering, tissue engineering aim at maintenance, improvement and repair of human body function through manufacturing and transplantation of artificial tissue and organ exchangeable human body. Basic material used in the area is scaffold that aid tissue and organ formation. Making scaffold, solvent-casting and particulate leaching technique is widely used in manufacturing of porous polymer scaffold. There are many types of particle including salt and gelatin. Salt is a most commonly used particulate because it is easily available and very easy to handle and gelatin particle is another candidate for this method because it is known as a material, which enhances cell attachment and proliferation. But there is no comparative study of two kinds of materials. In this study we compared the biocompatibility of the two scaffolds made from salt(salt scaffold) and gelatin particle (gelatin scaffold). These results demonstrated that gelatin scaffold showed better attachment of cells at the initial stage and better proliferation of cells. The better performance of gelatin scaffold is contributed to the better connection of pores in the same porosity.