• 한국통신학회논문지
• /
• 제31권3C
• /
• pp.237-244
• /
• 2006

본 논문에서는 2차원 결합 가우시안 Q-함수(Two-dimensional joint Gaussian Q-function)를 이용하여 AWGN(Additive White Gaussian Noise) 환경에서 M-PSK(M-ary Phase Shift Keying) 신호의 I/Q 위상 불균형(Phase unbalance) 존재 시 수치 적분이 필요 없는 정확하고 일반화된 closed-form 형태의 비트 오류율(Bit Error Rate) 표현을 유도한다. 새롭게 유도된 표현은 평균 BER 뿐만 아니라 k-번째 비트의 BER에 대하여도 일반화된 식으로 되어 있어 다양한 환경으로의 적용이 용이하여 M-PSK를 적용하는 많은 디지털 통신 시스템에서 복조 시 발생할 수 있는 I/Q 위상 불균형에 의한 시스템 성능 변화에 대하여 정확한 이론적 성능 기준을 제공할 것으로 기대된다.

• 한국조리학회지
• /
• 제22권8호
• /
• pp.89-98
• /
• 2016

사과가공 공정 중 많은 양의 사과박이 발생하며, 일부는 사료로 사용되나 대부분 버려지고 있다. 따라서 본 연구에서는 영양학적 가치가 높은 부산물을 10~30% 수준에서 밀가루를 대체하여 쿠키제조에 활용하고자 하였다. 반죽의 비중과 pH는 사과박의 첨가량이 증가함에 따라 다소 감소하는 경향을 보였다. 그러나 비중은 사과박을 첨가한 그룹 간에 유의적인 차이가 있지는 않았다. 당도는 30% 첨가 시 $2.07^{\circ}Brix$로 증가하였다. 쿠키의 수분함량, 퍼짐성, 손실률 및 팽창률은 사과박 첨가량이 증가함에 따라 증가하였다. 쿠키색의 밝기, 적색도 및 황색도는 사과박의 첨가량이 증가함에 따라 각각 70.46, 5.60, 37.52에서 56.25, 3.01, 27.92까지 감소하였다. 관능평가 결과, 사과박을 10%, 20% 첨가한 쿠키의 색, 향, 조직감, 외형, 전체적 기호도의 점수가 높았다. 따라서 쿠키제조 시 사과박의 첨가량은 20% 이내에서 사용하는 것이 좋을 것으로 판단된다.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1346-1358
• /
• 2018

A novel additive manufacturing method with TIG-MIG hybrid heat source was applied for fabricating 5356 aluminum alloy component. In this paper the microstructure evolution, mechanical properties and fracture morphologies of both as-deposited and heat-treated component were investigated, and how these were affected by different heat-treated temperature. The as-deposited microstructure showed dominant equiaxed grains with second phase, and the size of them is coarse in the bottom region, medium in the middle region and fine in the top region owing to different thermal cycling conditions. Compared with as-deposited microstructure, the size of grain becomes large and second phases gradually dissolve in the matrix as heat-treated temperature increase. Different microstructures determine the mechanical properties of component. Results show that average ultimate tensile strength enhances from 226 to 270 MPa and average microhardness increases from 64.2 to 75.3 HV0.1 but ductility decreases from 33 to 6.5% with heat-treated temperature increasing. For all components, the tensile properties are almost the same in the vertical direction (Z) and horizontal direction (Y) due to equiaxed grains, which exhibits isotropy, and the mechanisms of these are analyzed in detailed. In general, the results demonstrate that hybrid arc heat source has the potential to fabricate aluminum alloy component.

• 한국인터넷방송통신학회논문지
• /
• 제22권2호
• /
• pp.9-14
• /
• 2022

본 논문은 부분집합 합 문제의 해를 수행 복잡도 O(nlogn)으로 얻는 알고리즘을 제안하였다. SSP는 집합 S의 원소가 초증가수열과 랜덤수열로 구성된 경우로 구분된다. 초증가수열 SSP의 해를 구하는 알고리즘은 수행 복잡도 O(nlogn)의 가산 알고리즘 (Additive Algorithm)이 제안되었다. 그러나 랜덤수열 SSP의 해를 구하는 알고리즘은 2ⁿ-1의 가능한 모든 경우수를 확인하는 Brute-Force 방법으로 수행 복잡도는 O(n2ⁿ)만이 알려져 있다. 결국, SSP는 NP-완전 (NP-Complete) 문제로 알려져 있다. 본 논문은 초증가수열과 랜덤수열 SSP에 대해 수행 복잡도 O(nlogn)으로 해를 구하는 감산 알고리즘 을 제안하였다. 기존 개념은 목표 값 t보다 작은 값으로 구성된 부분집합 S에 대해 부분집합의 합에서 목표값을 뺀 값을 잉여량 (Residual, r)으로 하여 잉여량 보다 작은 값들 중 최대 값을 S에서 제거하는 방법을 적용하였다. 제안된 알고리즘을 다양한 초증가수열과 랜덤수열 SSP에 적용한 결과 S의 원소 개수보다 적은 수행 횟수로 해를 빠르게 얻는데 성공하였다. 결국, 제안된 알고리즘은 SSP의 해를 얻는 일반적인 알고리즘으로 적용할 수 있을 것이다.

• Advances in nano research
• /
• 제14권4호
• /
• pp.375-389
• /
• 2023

In this study, free vibration analysis of functionally graded (FG) porous truncated conical shell panels reinforced by graphene platelets (GPLs) has been investigated for the first time. Additionally, the effect of three different types of porosity distribution and five different types of GPLs patterns on dynamic response of the shell are also studied. Halpin-Tsai micromechanical model and Voigt's rule are used to determine Young modulus, shear modulus and Poisson's ratio with mass densities of the shell, respectively. The main novelties of present study are: applying 3D elasticity theory and the finite element method in conjunction with Rayleigh-Ritz method to give more accurate results unlike other simplified shell theories, and also presenting a general 3D solution in cylindrical coordinate system that can be used for analyses of different structures such as circular, annular and annular sector plates, cylindrical shells and panels, and conical shells and panels. A convergence study is performed to justify the correctness of the obtained solution and numerical results. The impact of porosity and GPLs patterns, the volume of voids, the weight fraction of graphene nanofillers, semi vertex and span angles of the cone, and various boundary conditions on natural frequencies of the functionally graded panel have been comprehensively studied and discussed. The results show that the most important parameter on dynamic response of FG porous truncated conical panel is the weight fraction of nanofiller and adding 1% weight fraction of nanofiller could increase 57% approximately the amounts of natural frequencies of the shell. Moreover, the porosity distribution has great effect on the value of natural frequency of structure rather than the porosity coefficient.

• 농업과학연구
• /
• 제37권3호
• /
• pp.405-412
• /
• 2010

This study was focused on finding the potential of hot water extract of bamboo shoot (Sasa borealis Makino) on the fermentation of Kimchi made with Chinese cabbage. The properties of Kimchi were examined up to 28 days of storage. The pH and acidity decreased regardless of treatments and showed no significant difference between treatments. There was a decreasing tendency of both total and reducing sugars in kimchi but the addition of bamboo extract did not affect the soluble sugar levels. Interestingly, bamboo extracts affected the lactic acid fermentation and ripening, resulting in the increase of lactic acid in bamboo extract treatment. Number of total bacterial cell of additive group is higher than control one, probably due to the stimulative effect of bamboo extract on bacterial growth. Level of lactic acid bacteria was also higher in the additive group, thus, it is considered that bamboo extract appeared to enhance the proliferation of lactic acid bacteria. The acceptability of treated Kimchi was higher in general. And results of intensity evaluation in color and texture were higher as well by addition of bamboo extract.

• 한국지능시스템학회논문지
• /
• 제14권7호
• /
• pp.889-894
• /
• 2004

Fuzzy Kernel C-Means(FKCM) 알고리즘은 커널 함수를 통하여 구형의 데이터뿐만 아니라 Fuzzy C-Means(FCM)에서는 분류하기 힘든 복잡한 형태의 분포를 갖는 데이터를 분류할 수 있다. 하지만 FCM과 같이 노이즈에 대해서는 민감한 성질을 가진다. 이처럼 노이즈(noise)에 민감한 성질을 보완하기 위해서 본 논문에서는 Possibilistic C-Means 알고리즘에 커널 함수를 적용하였다. 제안한 Kernel Possibilistic C-Means(KPCM) 알고리즘은 일반적인 데이터에 대해 FKCM과 같은 성능의 클러스터링 수행이 가능하며 노이즈가 있는 데이터에 대해서는 FKCM보다 정확한 클러스터링을 수행할 수 있다.

• 한국정밀공학회지
• /
• 제32권9호
• /
• pp.765-771
• /
• 2015

In an Additive Manufacturing (AM) system emplying the Powder Bed Fusion (PBF) system, polyamide-12 powder is currently recognized as the general material used. The Polyamide-12 powder's properties include an average particle size of 58 $58{\mu}m$, a density of 0.59 g/cm3, and melting point of $184^{\circ}C$, and can also be to used coat materials for metal powder. For this reason, the sintering process is similar to the polymer powder and polymer coated metal powder process, except during the post-process. The polyamide-12 powder has some disadvantages such as its high cost and the fact that it can only be used for the provided equipment from the maker. Therefore, this study aims to perform the applicability of new material, polymer and polymer coated metal, to the PBF system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.157-158
• /
• 2005

Superconducting fault currents(SFCLs) are expected to improve not only reliability but also stability of real power systems. The analysis on the single line-to-ground fault of the integrated three phase flux-lock type SFCL, which consists of three flux-lock reactor wound on an iron core in each single phase and three YBCO thin films, was investigated in current limiting operation characteristics. We compared 21turn numbers with 42turn numbers according to wound turn numbers each the coil 2 under the additive polarity winding operation between coil 1 and coil 2. The three phase flux-lock type SFCL using an iron core differently operates general three phase resistive SFCLs. When a single line-to-ground fault occurred, the SFCL's three units were quenched after fault onset. We confirmed effective current limiting operation characteristics with adjustable inductance level.

• 복식문화연구
• /
• 제22권2호
• /
• pp.339-345
• /
• 2014

This study analyzes and compares Hanji made with loess to Hanji made with kaolin, two yellow-based inorganic pigments, in terms of its physical properties, optical properties, and color fastness to light with the aim of using it as a fashion material. Hanji made by adding inorganic pigments showed an approximately 20% retention ratio on average. This figure was similar to those of loess and kaolin. Physical properties were analyzed, with the following results. A higher amount of additives lowered the apparent density and increased thickness and bulk. In general, inorganic pigment-added Hanji had lower tensile strength, bursting strength, and folding endurance compared to non-additive Hanji. The analysis of optical properties showed a lower brightness index for Hanji made with inorganic pigments compared to non-additive Hanji. When comparing the two inorganic pigments, the brightness of Hanji made with kaolin was higher. Regarding color fastness to light, loess showed level 4 and kaolin showed level 5 when 25% inorganic pigments on pulp were added to Hanji. Thus, Hanji made by adding inorganic pigments during the manufacturing process may perform well as materials for fashion because the additives enhanced both the color fastness to light and the bulk while maintaining the strength. In addition, Hanji dyed with inorganic pigments may have the potential to serve as materials for the fashion industry while still retaining the characteristics of Hanji.