• Archives of Pharmacal Research
• /
• 제29권12호
• /
• pp.1171-1178
• /
• 2006

This study examined the effects of flavors, which are usually added to improve the appeal of pharmaceutical agents, on the viscosity and gelling point of 18% (w/w) aqueous poloxamer 407 solutions. Monoterpenes, esters, alcohols, aldehyde ketones and lactone type flavors were examined. The concentrations of flavor ranged from 0.1 to 1.0%(w/w). After adding a flavor to the aqueous poloxamer 407 solution, the viscosity of the solution was measured using a Brookfield viscometer, and the gelling point was determined from the viscosity vs. temperature plot. The gelling point of the aqueous poloxamer 407 solution decreased with increasing concentration of flavors except for coumarin, vanillin and ethylvanillin. Thermal analysis with DSC showed an interaction between the flavors and poloxamer 407. These results suggest that the flavors bind to the hydrophilic end chains of poloxamer 407, which increases the viscosity, causing gelation at lower temperatures.

• 보존과학회지
• /
• 제37권4호
• /
• pp.370-379
• /
• 2021

In the past, PVAc [poly(vinyl acetate)] was used as a fixative for the conservation of the murals in the murals of the Payathonzu temple located in Bagan, Myanmar. In this study, attention was paid to gel cleaning as a method for stably removing such PVAc fixatives. Based on the recent research trend related to the cleaning of murals in Bagan ruins, 3 types of gelling agents (Nevek^®, Laponite^®RD, Carbopol^®980) and 2 types of organic solvents (Acetone, Dimethyl carbonate) were selected. Six types of gel cleaners were prepared by mixing gelling agents and organic solvents, and the properties and fixative removability of these cleaners were compared. As a result of confirming the properties of the prepared gel cleaners, the pH of the cleaners was all in the weak acidic to weakly alkaline range, which was a stable condition for mural application. Also, there was no difference in the viscosity of the cleaners depending on the type of solvent, but there was a difference depending on the type of gelling agent used. Regarding the weight loss ratio of PVAc, which is an indicator of removability, the exposure conditions of the gel cleaners, the boiling point of the solvent used, and the viscosity of the gelling agent acted as factors affecting. As a result of comparing the removability of gel cleaners, it was confirmed that the solvent's fixative solubility, the volatility of the solvent itself, and the solvent release control properties of the gelling agent had a great effect on the removability of the gel cleaners. In Part 2, the stability and the running applicability of the gel cleaners will be investigated by making mockup samples reflecting the properties of the materials and techniques used to produce the mural paintings in the Payathonzu Temple.

• Fisheries and Aquatic Sciences
• /
• 제17권3호
• /
• pp.299-304
• /
• 2014

The objective of this study was to elucidate the physicochemical characteristics of gelatin extracted from jellyfish Rhopilema hispidum. We investigated the proximate composition, amino acids, gel strength, gelling/melting points, dynamic viscoelastic properties, and viscosity of jellyfish gelatin. Jellyfish gelatin contained 12.2% moisture, 1.5% lipid, 2.1% ash, and 84.8% protein. Glycine, hydroxyproline, proline, and alanine were the predominant amino acids. The gelatin showed a gel strength of 31.2 kPa, a gelling point of $18.0^{\circ}C$, and melting point of $22.3^{\circ}C$. The gelatin was composed of ${\alpha}_1$-chain, ${\alpha}_2$-chain, ${\beta}$-chain, and ${\gamma}$-chain. During cooling and heating process, jellyfish gelatin showed lower elastic modulus (G') and loss modulus (G") values than mammalian gelatin. Jellyfish gelatin did not show superior rheological properties to mammalian gelatin, like other fish gelatin; however, it can be used in various food and cosmetic products not requiring high gel strength.

• 한국식품과학회지
• /
• 제27권4호
• /
• pp.483-486
• /
• 1995

가공적성이 우수한 알코올처리 각시가자미껍질 젤라틴을 식품산업소재로 이용하기 위한 기초자료를 얻을 목적으로 젤라틴농도, pH, 정치온도 및 시간과 같은 겔화조건에 대한 알코올처리 젤라틴의 물리적 특성 및 색조의 변화를 알코올 무처리 젤라틴과 비교하여 검토하였다. 알코올처리 및 무처리 젤라틴이 모두 농도가 증가할수록 겔강도, 졸화온도 및 겔화온도 및 점도 등과 같은 물리적 특성은 증가하였다. 젤라틴 졸의 pH가 에탄올처리한 젤라틴의 경우 6.0일 때, 무처리한 젤라틴의 경우 5.0일 때 겔강도, 졸화온도 및 겔화온도가 가장 높았으나, $pH\;5.0{\sim}8.0$의 범위에서는 거의 차이가 없었고, pH 5.0 이하 및 pH 9.0 이상에서는 급격히 감소하였다. 젤라틴 졸을 겔화시키기 위하여 정치시키는 경우 온도는 낮을수록, 시간은 길수록 겔강도 및 졸화온도는 높았다. 겔화조건을 동일하게 하였을 때 에탄올처리한 젤라틴이 무처리한 젤라틴보다 물리적 특성이 우수하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.761-762
• /
• 1988

This paper is to investigate dielectric properties, dielectric breakdown strength, varing of interior organization and gelling point temperature as parameter of post-cure conditions of thermo-setting epoxy resin.

• 한국식품영양학회지
• /
• 제10권2호
• /
• pp.234-240
• /
• 1997

식품산업을 포함한 다양한 분야에서 이용되고 있는 한천의 용도를 개발하기 위하여 각종 물리적인 처리가 한천의 열적 특성에 미치는 영향과 각 처리에 다른 표면구조의 변화를 조사하였다. 시차주사 열량분석기를 이용하여 w사한 일반한천의 흡열개시온도(To), 최대흡열점의 온도(Tp) 및 흡열완료온도(Te)는 81.20, 95.51 및 $112.14^{\circ}C$였으며, 분무건조한천은 60.11, 76.45 및 $89.54^{\circ}C$였고, 압출성형한천은 41.30, 61.72 및 $80.50^{\circ}C$로 압출성형한천이 가장 낮은 온도에서 진행되었다. 또한 엔탈피도 일반한천 3.22cal/g, 분무\ulcorner한천 1.53cal/g, 압출성형한천 0.73cal/g의 순서로 압출성형한천에서 가장 낮았다. 완전히 가열용해한 각 한천을 다시 냉각, 응고 후에 다시 승온하였을 때의 To, Tp 및 Te는 일반한천 80.70, 95.61 및 $110.92^{\circ}C$, 붐무건조한천 79.54, 93.76 및 $109.84^{\circ}C$, 압출성형한천 79.25, 93.19 및 $108.77^{\circ}C$로 한천의 종류에 따른 차이는 없었다. 엔탈피 역시 큰 차이를 보이지 않았다. 광학현미경과 주사전자현미경에 의해 표면구조를 관찰한 결과, 일반한천의 경우 단단한 구조로 균열이나 기공들이 관찰되지 않았고, 분무건조한천은 많은 미세입자들이 다량으로 느슨하게 붙어있는 다공질구조로 외부에 노출되는 표면적이 넓었으며, 압출성형한천은 굴곡, 요철 및 균열이 생겨서 수분침투가 용이한 구조를 이루고 있었다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 총회 및 춘계학술발표회
• /
• pp.66-69
• /
• 2001

A subsurface containment system which is constructed by pumping a gelling liquid (Colloidal Silica) into the unsaturated medium is investigated by developing a mathematical model and conducting numerical simulations. The proposed model is verified by comparing experimentally and numerically determined hydraulic conductivities of gel-treated soil columns at different Colloidal Silica (CS) injection volumes. The numerical experiments indicate that an impermeable gel layer is formed within the time period twice the gel-point. At the Same normalized time, the CS solutions with lower NaCl concentrations result ill further migration and poor Performance in plugging the pore space.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.810-812
• /
• 1988

This paper is to investigate dielectric properties and new fabrication method of Glass-Cloth/Epoxy composite materials. According to the results of this paper, gelling point temperature is affected significantly on the ambient temperature. And Tan${\delta}$ characteristics of Glass-Colth/Epoxy composite materials is also affected significantly on the state of interior void of glass cloth and interface coupling between epoxy resin and glass cloth.

• 대한전기학회논문지
• /
• 제38권4호
• /
• pp.292-297
• /
• 1989

To achieve fiber/resin reinforced composites with high quality (void-free, uniform compaction), a basic understanding of the principal factors related to a thermal cycle to cure the matrix and a pressure to compact the system is necessary. In this paper, some dielectric and mechanical properties of glass cloth reinforced epoxy composites are measured as a function of fabrication conditions, where the time that the pressure is applied to the sample during the cure process is controlled. Both the tensile strength and frequency characteristics of the sample are improved significantly when the pressure is applied at the start point of gelling.

• Applied Biological Chemistry
• /
• 제38권4호
• /
• pp.330-333
• /
• 1995

알코올처리 찰가자미류껍질 젤라틴을 식용단백소재로 이용하기 위한 기초자료를 얻을 목적으로 첨가제에 의한 알코올처리 젤라틴의 물리적 특성치의 변화를 검토하였다. 겔강도, 졸화온도, 겔화온도 및 점도와 같은 물리적 특성치는 에탄올처리의 유무에 관계없이 두 젤라틴 모두가 철이온, 당 및 에탄올을 첨가한 경우는 증가하였으나, 염화나트륨 및 유기산을 첨가한 경우는 감소하는 경향을 나타내었고, 첨가물에 의한 물리적 특성치의 증감폭은 에탄올 처리 유무에 따라 차이가 없었다.