• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.3
• /
• pp.308-314
• /
• 2016

This paper proposes design guidances for noise reduction of a bank teller cash recycler(TCR). The operating noise of a TCR is required to be reduced because it bothers bank tellers and customers. The operating noise from a TCR is measured and the most influential driving system is examined. To find the main sources of the noise, the frequency spectra are analyzed by comparing with excitation frequencies of the driving system. From the analysis results, we reveals that the main sources of the noise are gear mesh frequency of a certain gear train and its side band frequencies, which is attributed by vulnerable support condition. Consequently, to reduce the operating noise, the structural modification for the gear train support is suggested and its effectiveness for the noise reduction is confirmed experimentally.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.617-622
• /
• 2002

This paper presents that the Wavelet Transform can be used to detect the various local defects in a gearbos. Two types of defects which are broken tooth and localized wear, are experimented and the signals are collected by accerometer and analyzed. Because of the complecity of the signals acquired from sensor, it is needed to identify the interesting signal. The natural frequencies of shafts and the gear mesh frequency(GMF) is calculated theretically. DWT, CWT and the aplication are used to extract a gear-localized defect feature from the vibration signal of the gearbox with the defective gear. The results shows the transform is more effective to detect the failures than the Fourier Transform.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.12
• /
• pp.1593-1598
• /
• 2011

The purpose of this study is to perform parameter selection and develop a method for the condition monitoring of an LCD conveyance robot. To determine the vibration characteristics of the driving part of the robot, the gear mesh frequency (GMF) of the speed-reducing gearbox is calculated and confirmed by frequency analysis. In order to ensure reproducibility of the measured data, an appropriate working pattern is selected and experiments are carried out. For condition monitoring of the robot, a wireless measurement system is constructed and used in parameter selection, with the GMF as the center. A method involving the use of the standard deviation of the measured data and another method involving the use of multiple value of amplitude are proposed.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.343-346
• /
• 2008

To improve the reliability and extend the life for a wind-turbine gearbox, the gearbox needs to be monitored and analysed exactly. This study was conducted to analyze and detect the gearbox conditions when lubricating oil contaminated by wear particles was used. Characteristics of the gearbox failure by wear particles were monitored simultaneously by the on-line measurement sensor of vibration, oil condition and temperature. For the detail vibration analyses, frequency analysis(FFT) was performed. The results of the study were summarized as follows: Vibrational signal was found sensitive to abnormal changes of the gearbox conditions when lubricant was contaminated by wear particles. Also, using frequency analysis for the harmonics of gear mesh frequency(GMF), it is found that the failure of gearbox was caused by the damages of meshing gears. However, temperature and oil condition measuring signals were found not so effective to detect any gearbox failure by oil contamination.