• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.1
• /
• pp.76-84
• /
• 2007

The goal of this paper is to improve the watermarking performance using the following two methods; watermark estimation and low density parity check (LDPC) codes. For a blind watermark decoding, the power of a host image, which is hundreds times greater than the watermark power, is the main noise source. Therefore, a technique that can reduce the effect of the power of the host image to the detector is required. To this end, we need to estimate watermark from the watermarked image. In this paper, the watermark estimation is done by an adaptive estimation method with the generalized Gaussian distribution modeling of sub-band coefficients in the wavelet domain. Since the watermark capacity as well as the error rate can be improved by adopting optimum decoding principles and error correcting codes (ECC), we employ the LDPC codes for the decoding of the estimated watermark. Also, in LDPC codes, the knowledge about the noise power can improve the error correction capability. Simulation results demonstrate the superior performance of the proposed algorithm comparing to LDPC decoding with other estimation-based watermarking algorithms.

• Journal of Environmental Science International
• /
• v.12 no.3
• /
• pp.265-274
• /
• 2003

The Pasquill-Gifford stability category is a very important scheme of the Gaussian type dispersion model defined the complex turbulence state of the atmosphere by A grade(very unstable) to F grade(very stable). But there has been made a point out that this stability category might decrease the predictability of the model because it was each covers a broad range of stability conditions, and that they were very site specific. The APSM (Air Pollution Simulation Model) was composed of the turbulent parameters, i.e. friction velocity(${\mu}$$\_$*/), convective velocity scale($\omega$$\_$*/) and Monin-Obukhov length scale(Ｌ) for the purpose of the performance increasing on the case of the unstable atmospheric conditions. And the PDF (Probability Density Function)model was used to express the vertical dispersion characteristics and the profile method was used to calculate the turbulent characteristics. And the performance assessment was validated between APSM and EPA regulatory models(TEM, ISCST), tracer experiment results. There were very good performance results simulated by APSM than that of TEM, ISCST in the short distance (<1415 m) from the source, but increase the simulation error(%) to stand off the source in others. And there were differences in comparison with the lateral dispersion coefficient($\sigma$$\_$y/) which was represent the horizontal dispersion characteristics of a air pollutant in the atmosphere. So the different calculation method of $\sigma$$\_$y/ which was extrapolated from a different tracer experiment data might decrease the simulation performance capability. In conclusion, the air pollution simulation model showed a good capability of predict the air pollution which was composed of the turbulent parameters compared with the results of TEM and ISCST for the unstable atmospheric conditions.

• Proceedings of the Korean Nutrition Society Conference
• /
• 2004.11a
• /
• pp.22-33
• /
• 2004

It has been more than three decades since the first assay assessing circulating 25(OH)D in human subjects was performed. That publication as well as several that followed it defined 'normal' nutritional vitamin D status in human populations. Recently, the wisdom by which 'normal' circulating 25(OH)D levels in human subjects were assigned in the past has come under question. It appears that sampling human subjects, who appear to be free from disease, and assessing 'normal' circulating 25(OH)D levels by plotting a Gaussian distribution is grossly inaccurate. There are many reasons why this method is inaccurate, including race, lifestyle habits, sunscreen usage, age, latitude, and inappropriately low dietary recommendations for vitamin D. For instance, a 400IU/day. AI for vitamin D is insignificant when one considers that a 10-15 minute whole body exposure to peak summer sun will generate and release up to 20,000 IU vitamin $D_3$ into the circulation. Recent studies, which orally administered up to 10,000 IU/day vitamin $D_3$ to human subjects for several months, have successfully elevated circulating 25(OH)D levels to those observed in individuals from sun-rich environments. Further, we are now able to accurately assess sufficient circulating 25(OH)D levels utilizing specific biomarkers instead of guessing what an adequate level is. These biomarkers include intact parathyroid hormone (PTH), calcium absorption, bone mineral density (BMD), insulin resistance and pancreatic beta cell function. Using the data from these biomarkers, vitamin D deficiency should be defined as circulating levels of $25(OH)D{\leq}30ng/mL$. In certain cases, such as pregnancy and lactation, significantly higher circulating 25(OH)D levels would almost certainly be beneficial to both the mother and recipient fetus/infant.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.63-70
• /
• 2016

To increase throughput efficiency and improve performance, FTN(Faster Than Nyquist) method and LDPC(Low Density Parity Code) codes are employed in DVB-S3 system. In this paper, we proposed efficient turbo equalization model to minimize inter symbol interference induced by FTN transmission. This paper introduces two conventional scheme employing SIC(Successive Interference Cancellation) and BCJR equalizer. Then, we proposed new scheme to resolve problems in this two conventional scheme. To make performance improved in turbo equalization model, the outputs of LDPC and BCJR equalizer are iteratively exchange probabilistic information. In fed LDPC outputs as extrinsic informa tion of BCJR equalizer. we split LDPC output to separate bit probabilities. We compare performance of proposed scheme to that of conventional methods through using simulation in AWGN(Additive White Gaussian Noise) channel. We confirmed that performance was improved compared to conventional methods as increasing throughput parameters of FTN.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.10
• /
• pp.2923-2928
• /
• 2010

This study examined the synthesis of the crystal structure of bis(2,2'-bipyridine)nitrato zinc (II) nitrate, $[Zn(bipy)_2(NO_3)]^+NO_3^-$ using a microwave treatment at 300 W and 60 Hz for the application to dye-sensitized solar cells. The simulated complex structure of the complex was optimized with the density functional theory calculations for the UV-vis spectrum of the ground state using Gaussian 03 at the B3LYP/LANL2DZ level. The structure of the acquired complex was expected a penta-coordination with four nitrogen atoms of bipyridine and the oxygen bond of the $NO_3^-$ ion. The reflectance UV-vis absorption spectra exhibited two absorptions (L-L transfers) that were assigned to the transfers from the ligand ($\sigma$, $\pi$) of $NO_3$ to the ligand ($\sigma^*$, $\pi^*$) of pyridine at around 200 - 350 nm, and from the non-bonding orbital (n) of O in $NO_3$ to the p-orbital of pyridine at around 450 - 550 nm, respectively. The photoelectric efficiency was approximately 0.397% in the dye-sensitized solar cells with the nanometer-sized $TiO_2$ at an open-circuit voltage (Voc) of 0.39 V, a short-circuit current density (Jsc) of $1.79\;mA/cm^2$, and an incident light intensity of $100\;mW/cm^2$.

• Journal of Broadcast Engineering
• /
• v.8 no.4
• /
• pp.437-451
• /
• 2003

With the rapid growth of internet technologies and wide availability of multimedia computing facilities, the enforcement of multimedia copyright protection becomes an important issue. Digital watermarking is viewed as an effective way to deter content users from illegal distributions. In recent years, digital watermarking has been intensively studied to achieve this goal. However, when the watermarked media is transmitted over the channels modeled as the additive white Gaussian noise (AWGN) channel, the watermark information is often interfered by the channel noise and produces a large number of errors. So many error-correcting codes have been applied in the digital watermarking system to protect the embedded message from the disturbance of the noise, such as BCH codes, Reef-Solomon (RS) codes and Turbo codes. Recently, low-density parity-check (LDPC) codes were demonstrated as good error correcting codes achieving near Shannon limit performance and outperforming turbo codes nth low decoding complexity. In this paper, in order to mitigate the channel conditions and improve the quality of watermark, we proposed the application of LDPC codes on implementing a fairly robust digital image watermarking system. The implemented watermarking system operates in the spectrum domain where a subset of the discrete wavelet transform (DWT) coefficients is modified by the watermark without using original image during watermark extraction. The quality of watermark is evaluated by taking Into account the trade-off between the chip-rate and the rate of LDPC codes. Many simulation results are presented in this paper, these results indicate that the quality of the watermark is improved greatly and the proposed system based on LDPC codes is very robust to attacks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.9
• /
• pp.1654-1665
• /
• 2008

This paper presents bit splitting methods to apply multilevel modulation to iterative codes such as turbo code, low density parity check code and turbo product code. Log-likelihood ratio method splits multilevel symbols to soft decision symbols using the received in-phase and quadrature component based on Gaussian approximation. However it is too complicate to calculate and to implement hardware due to exponential and logarithm calculation. Therefore this paper presents Euclidean, MAX, sector and center focusing method to reduce the high complexity of LLR method. Also, this paper proposes optimal soft symbol split method for three kind of iterative codes. Futhermore, 16-APSK modulator method with double ring structure for applying DVB-S2 system and 16-QAM modulator method with lattice structure for T-DMB system are also analyzed.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.27 no.5
• /
• pp.221-230
• /
• 2023

This study proposes a methodology for assessing seismic liquefaction hazard by implementing high-resolution three-dimensional (3D) ground models with high-density/high-precision site investigation data acquired in an area of interest, which would be linked to geotechnical numerical analysis tools. It is possible to estimate the vulnerability of earthquake-induced geotechnical phenomena (ground motion amplification, liquefaction, landslide, etc.) and their triggering complex disasters across an area for urban development with several stages of high-density datasets. In this study, the spatial-ground models for city development were built with a 3D high-precision grid of 5 m × 5 m × 1 m by applying geostatistic methods. Finally, after comparing each prediction error, the geotechnical model from the Gaussian sequential simulation is selected to assess earthquake-induced geotechnical hazards. In particular, with seven independent input earthquake motions, liquefaction analysis with finite element analyses and hazard mappings with LPI and LSN are performed reliably based on the spatial geotechnical models in the study area. Furthermore, various phenomena and parameters, including settlement in the city planning area, are assessed in terms of geotechnical vulnerability also based on the high-resolution spatial-ground modeling. This case study on the high-precision 3D ground model-based zonations in the area of interest verifies the usefulness in assessing spatially earthquake-induced hazards and geotechnical vulnerability and their decision-making support.

• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4636-4643
• /
• 2022

A time-of-flight and energy (TOF-E) detection system for the measurement of ²³⁶U accelerator mass spectrometry (AMS) has been developed to improve the ²³⁶U/²³⁸U sensitivity at Micro Analysis Laboratory, Tandem accelerator (MALT), The University of Tokyo. With observing TOF distribution of ²³⁵U, ²³⁶U and ²³⁸U, this TOF-E detection system has clearly separated ²³⁶U from the interference of ²³⁵U and ²³⁸U when measuring three kinds of uranium standards. In addition, we have developed a novel method combining kernel-based density estimation method and multi-Gaussian fitting method to estimate the ²³⁶U/²³⁸U sensitivity of the TOF-E detection system. Using this new estimation method, 3.4 × 10^-12 of ²³⁶U/²³⁸U sensitivity and 1.9 ns of time resolution are obtained. ²³⁶U/²³⁸U sensitivity of TOF-E detection system has improved two orders of magnitude better than that of previous gas ionization chamber. Moreover, unknown species other than uranium isotopes were also observed in the measurement of a surface soil sample, which has demonstrated that TOF-E detection system has a higher sensitivity in particle identification. With its high sensibility in mass determination, this TOF-E detection system could also be used in other heavy isotope AMS.

• Journal of The Korean Astronomical Society
• /
• v.30 no.1
• /
• pp.83-94
• /
• 1997

We have identified the candidates for the primordial galaxies in the process of formation in the Hubble Deep Field (hereafter HDF). In order to select these objects we have removed objects brighter than 29-th magnitude in the HDF images and smoothed the maps with the Gaussian filters with the FWHM of 0.8' and 4' to obtain the difference maps. This has enabled us to find. very faint diffuse structures close to the sky level. Peaks are identified in the difference map for each of three HDF chips with three filters (F450W, F606W, and F814W). They have the apparent AB magnitudes typically between 29 and 31. The objects identified in different wavelengths filters have a strong cross-correlations. The correlation lengths are about 0.8'. This means that an object found in one filter can be also found as a peak within 0.8' separation in another filter, thus telling the reality of the identified objects. This angular scale is also the size of the primordial galaxies which have strong color fluctuations on their surfaces. Their large-scale distribution quite resembles that of nearby galaxies, supporting the idea that these objects are ancestors of the present bright galaxies forming at statistically high density regions. Inspections on individual objects show that these primordial galaxy candidates have tiny multiple glares embedded in diffuse backgrounds. Their radial light distributions are quite different from that of nearby bright galaxies. We may be now looking at the epoch of galaxy formation.