• 음성과학
• /
• 제8권3호
• /
• pp.161-172
• /
• 2001

Ankyloglossia (tongue-tie) limits movement of the tongue connected with feeding and has adverse impacts on both dental health and speech. For the patients with ankyloglossia, surgical intervention is recommended as primary treatment. This study suggests the efficient tool in determining indicatory factors for frenulotomy by quantifying Maximum Lingual Length-Protrusion (MLL-P) with boley gauge, and as a preliminary study, to show the measurement results with normal children using the tool. The subjects were 61 normal children, and the distance (MLL-P) between mandibular central incisor and tongue tip during tongue protrusion was measured with a boley gauge (Digimatic $Caliper^{(R)}$). The results of this study can be summarized as follows: (1) The mean value of MLL-P (N=61 normal children) was 21.44 mm, (2) The mean value of MLL-P was 20.69 mm in males (N=33) and 21.91 mm in females (N=28). There was no statistically significant difference between males and females, (3) The mean value of MLL-P was 19.34 mm, 21.19 mm, 22.33 mm, 22.61 mm for measurement of 3-, 4-, 5- and 6-year-old children, respectively, and (4) The mean value of MLL-P showed statistically significant difference between 3- and 5-year-old children, between 3- and 6-year old children.

• 한국의상디자인학회지
• /
• 제16권1호
• /
• pp.117-123
• /
• 2014

This paper examined dyeing using sulfur dye with nylon and the characteristics of high gauge knitting for generating high functionality including light weight, wind resistance and elasticity using fine nylon threads. Yarn tension, stitch field and knitting speed of high and fine gauge knitting were measured. The influence of reducing agents on sulfur dye, optimum dyeing conditions and fastness features in nylon dyeing were analyzed. The analysis results are presented below. When nylon (Hyoseong, 40d/34f) and spandex (Hyoseong, 20d) for use as hosiery yarn were used to knit high gauge and flat weave, 44 gauge, the effective knitting conditions were a stitch field over 8.2cm in 1 course length, yarn tension of less than 5g and knitting speed below 18rpm. Nylon dyeing using sulfur dye showed effective results when a rongalite reducing agent was used at more than 10% o.w.f. and dyeing was maintained at $98^{\circ}C$ for 30 minutes. For dyeing nylon and spandex composite using sulfur dye, color fastness in washing, water, daylight and friction were higher than Class 4 or 5, which indicated a superior property. The analysis results verified that the existing problems in nylon dyeing could be solved by using sulfur dyes that don't use heavy metals due to superior fastness and therefore quality, high gauge nylon knit products could be produced.

• 한국의상디자인학회지
• /
• 제19권4호
• /
• pp.1-15
• /
• 2017

The aim of this study is to plan a design that satisfies consumer needs by forecasting future properties following changes of gauge in basic Jacquard structure and to provide helpful data for a variety of knit-wear development. Four basic Jacquard knit samples (Normal Jacquard, Bird's eye Jacquard, Floating Jacquard, Tubular Jacquard) were selected and projected by using three types of gauges (7G, 12G, 14G) with an SES-122S type Computer Knitting machine of Shimaseiki MFG. Twelve different types of samples with Jacquards and gauges were tested on a flat table by measuring the course and wale in a 1cm area to calculate the gauge of samples. The mechanical properties of 12 types of Jacquard samples were measured using KES-FB (Kawabata Evaluation System for Fabric, Kata Tech Co. Ltd). As the result of comparing the number of patterns, courses and wales depending on the change of gauge of the basic Jacquard structure, it was observed that the number of patterns per specific length, course and wale has increased from 7G to 14G, a high-gauge. According to objective research regarding Jacquard structure, 7G Tubular Jacquard, which is low gauge, seems to be suitable for masculine design as it is heavy and thick, and has rigid and rough texture due to a high level of flexural strength and shear property. 14G Floating Jacquard, which is high gauge, seems to be suitable for feminine, silhouette design as it is light, thin, soft, flexible and has high drape. The result of this study provides a theoretical foundation for knit-wear development considering basic Jacquard structure and gauge-specific properties. This study can be used to provided directions for the development of knit industry.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권3호
• /
• pp.438-443
• /
• 2006

The probe type sensor using strain gauges was used to track a container box's seam in this paper. A strain gauge has a property which the specific resistance is changed by varying of the sectional area and length when tensile and compressive stresses are generated at the strain gauge. We designed the automatic seam tracking device by attaching the probe type strain gauge sensor, motor driving slide, encorder to check the moving distance and interface card connected MPU upside the speed controllable carriage. The folded work piece for a container box is made to examine whether the device can track the seam automatically or not. Seam tracking experiments were done by changing the carriage moving speed at 300. 400. 500. 600[mm/min] each as the voltage of side track was 2.5[V]. We compared and analyzed the sampling data which is obtained by output voltage of strain gauge sensor and rotary encorder pulse every 100 [m/s]. The welding experiments were performed by using $CO_2$ welding machine about the carriage moving speed that has good seam tracking condition in the seam tracking experiments above. And we compared the seam tracking status.

• 센서학회지
• /
• 제17권3호
• /
• pp.162-167
• /
• 2008

In this paper we report on the electrical properties of carbon fiber which is an attractive material for strain gauges and can also be applied to resonating micro sensors. The carbon fibers used in this research was manufactured from polyactylonitrile (PAN). The fabricated carbon fibers had about $10\;{\mu}m$ in length and several centimeters in length. We employed a micro structure to measure electrical properties of the carbon fiber. The measured electrical resistivity of the carbon fibers were about $3{\times}10^{-3}{\Omega}{\cdot}cm$ A gauge factor of the carbon fiber is also observed with the same system and it was about 400, depending on the structure of the carbon fiber. For the sensor applications of the carbon fiber, it is selectively placed between the gap of Al electrodes using a dielectrophoresis method. When the carbon fiber is resonated by a piezoelectric ceramic, resistance change at a variety of resonance mode was observed through an electrical system.

• 한국수자원학회논문집
• /
• 제40권11호
• /
• pp.841-849
• /
• 2007

본 연구에서는 우량계와 강우 레이더를 함께 이용하는 경우의 통합관측 효과를 검토하였다. 통합관측효과는 서로 직교하는 관측방법의 결합에 따른 관측오차의 감소를 고려함으로써 평가된다. 구체적인 적용 예로서 금강유역에 대하여 강우 레이더가 추가로 설치되는 경우 우량 관측망 밀도를 어느 정도까지 조정할 수 있는지에 대한 평가를 수행하였다. 이를 위해 North and Nakamoto(1989), Yoo et al. (1996), 유철상(1997)의 관측오차 관련 연구를 응용하였으며, 강우장의 모형화를 위해서는 그 구조가 간단한 NFD 모형을 이용하였다. 모형의 매개변수는 금강유역의 28개 우량 관측소 시자료를 이용하여 추정된 강우장의 특성치(상관거리 및 상관시간)를 이용하여 결정하였고, 레이더의 운영 특성은 임의로 가정하였다. 본 연구에서는 WMO(1994)의 추천 우량관측 밀도와 금강유역에 설치된 우량 관측 밀도를 고려하여 레이더의 도입으로 인한 우량 관측 밀도의 조정 방안을 제시하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.279-280
• /
• 2010

철근콘크리트구조의 연성에 영향을 미치는 중요한 요소인 철근의 최소연신율 규정은 각 나라 규격마다 상이하다. 이는 각 규격마다 철근의 연신율을 산출하는 기준인 표점거리가 다르기 때문이다. 이에 본 연구에서는 각기 다른 표점거리를 가지고 있는 국내외 규격을 비교하고, 단조증가 인장시험을 통하여 어떠한 규격의 연신율 규정이 더 엄격한지에 대해 실험적으로 분석 평가하였다.

• 대한기계학회논문집A
• /
• 제29권4호
• /
• pp.555-562
• /
• 2005

In this study, we tried to establish the method of evaluating the tensile properties of the ring specimen of Arsene which have gauge length. In this result, we verified the availability of central piece. We made ring specimens and devices such as central piece, pins, and clevises. A proper tensile speed was determined by pre-test. The result of main test was calibrated and compared with the result of FEM. To obtain the tensile properties from the ring test result, we observed two relationships: one is strain-displacement and the other is load ratio-displacement. The tensile properties could be evaluated by using these relationships.

• 한국세라믹학회지
• /
• 제27권8호
• /
• pp.1043-1049
• /
• 1990

In this work, strength of ceramic fibers and monofilament composites were evaluated on the basis of Weibull's theory. The fibers used were β-SiC and γ-Al2O3 monofilament composites was fabricated by coating Al on the fiber surface by the use of vacuum evaporation method. Average tensile strength of ceramic fibers showed the tendency to linearly decrease with increasing gauge length. Also, Weibull moduli of ceramic fibers were decreased with increasing gauge length, Weibull modulus of β-SiC was 3.5 for 6-50mm, 2.8 for 100-200mm. Weibull modulus of γ-Al2O3 was 6.5 for 20-50mm, 6 for 100mm. Fibers in monofilament retained their original as-produced strength to exposure temperature of 400℃. However, tensile strength of both monofilament composites approved to remarkably degrade due to interfacial reaction-induced flaws on the fiber surface after thermal exposure of 600℃. In this case, Weibull modulus of monofilament composites was 2.7 for β-SiC and 5.2 for γ-Al2O3 respectively.

• 대한기계학회논문집
• /
• 제16권2호
• /
• pp.200-206
• /
• 1992

The effect of fiber diameter and gauge length on pull-out test for the interfacial properties in fiber reinforced resin composites have been investigated and these results have been arranged as statistical analysis. The fiber and matrix resins used for this study were stainless steel fiber (SUS316) and carbon fiber (high strength type), epoxy and high density polyethylene resin. From this study, it has been found that shear strength are constant regardless of gauge length of pull-out test and coefficient of variation depend on fiber diameter. In addition, it has been found that the interfacial shear strength decreased with the increasing fiber diameter, and in all case, Weibull parameter (m) has approximately 1.2/C.O.V.