• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1184-1189
• /
• 2004

Coking process is the thermal decomposition of bituminous coal with final temperature of about $900^{\circ}C$ Because coke plays important roles in ironmaking process in a blast furnace it's essential for developing modeling of coke oven. In this study, An unsteady 2-dimesional model is proposed to simulate coking process in a coke oven. In this model, gas and solid phase are assumed homogeneous continnum and solid bed is assumed as porous media . The model contains governing equations for the solid phase and the gas phase. Complicated phenomena such as swelling, softening, resolidification and shrinkage are neglected and mass loss by drying and devolatilization is reflected by generation of internal pores. Drying, devolatilization, heat transfer and generation of internal pores are also reflected in source terms. Calulated results are compared with experimental data

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제23회 KOSCO SYMPOSIUM 논문집
• /
• pp.161-168
• /
• 2001

Sintering bed of iron ore in the steel making process is one of typical applications of solid fuel bed, which has relatively uniform progress of fuel and simple processes of combustion. The sintering bed was modelled as an unsteady one-dimensional progress of fuel layer containing the two phases of solid and gas. Cokes added to the raw mix of which the amount is about 3.5% of the total weight was assumed to form a single particle with other components. In the early predition results presented in this paper, the flame propagation within the bed was not sustained after the top surface of the bed was ignited with hot gas. It suggests that the model should be extended to consider the multiple solid phase, which can treat the ore particles and the coke particles separately.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.253-255
• /
• 2012

This study has numerically investigated the combustion processes in the bilayer porous media. To account for the velocity transition and diffusion influenced by solid matrix, porosity effects are included in the governing equations. Heat transfer coefficient is calculated by Nusselt number to reflect the effect of gas velocity, pore diameter, and material properties. Numerical results indicate that the present approach is capable of the essential features of the premixed combustion in the porous burner, in terms of the precised flame structure, pollutant formation, and flame stabilization. It is also found that heat transferred from the downstream flame zone is conducted to the upstream flame region through the solid matrix and the preheated mixture. By increasing the inlet velocity, the solid temperature of upstream is cooling down.

• 대한기계학회논문집B
• /
• 제35권11호
• /
• pp.1177-1184
• /
• 2011

GTS 기술은 천연가스 하이드레이트 생산, 해양수송 및 재기화의 3 단계로 구성되며, 대규모 재기화 플랜트의 효율적 운용을 위해서는 하이드레이트 펠릿의 재기화에 필요한 열수 온도와 유량의 정확한 예측이 필수적이다. 하이드레이트 펠릿이 열수에서 해리할 때 펠릿 표면에서 분출되는 가스는 주변 유동장과 열전달 특성에 영향을 미칠 것이며 본 실험에서는 가압된 용기내의 중저온 열수에서 해리하는 메탄가스 하이드레이트 펠릿의 용해특성을 연구하였다. 해리과정 중 변화하는 펠릿 형상을 관찰하고 해리 완료시간을 측정함으로써 하이드레이트 전환율, 열수 온도 및 유동속도가 해리에 미치는 영향을 파악하였으며, 펠릿 표면에서 분출되어 상승하는 메탄가스 기포류가 유발한 2 차유동이 열전달률을 증가시켜 해리 완료시간이 단축됨을 확인하였다.

• 대한기계학회논문집
• /
• 제18권9호
• /
• pp.2404-2412
• /
• 1994

A mathematical model has been developed for predicting kinematic, thermal, and solidification histories of atomized droplets during flight. Liquid droplet convective cooling, recalescence, equilibrium-state solidification, and solid-phase cooling were taken into account in the analysis of the solidification process. The spherical shell model was adopted where the heterogeneous nucleation is initiated from the whole surface of a droplet. The growth rate of the solid-liquid interface was determined from the theory of crystal growth kinetics with undercooling caused by the rapid solidification. The solid fraction after recalescence was obtained by using the integral method. The thermal responses of atomized droplets to gas velocity, particle size variation, and degree of undercooling were investigated through the parametric studies. It is possible to evaluate the solid fraction of the droplet according to flight distance and time in terms of a dimensionless parameter derived from the overall energy balance of the system. It is also found that the solid fraction at the end of recalescence is not dependent on the droplet size and nozzle exit velocity but on the degree of subcooling.

• 한국주조공학회지
• /
• 제13권5호
• /
• pp.462-475
• /
• 1993

A numerical analysis on the microstructural evolutions of microcellular and cellular ${\alpha}-aluminum$ phase in the gas-atomized Al-8wt. pct droplets was represented. The 2-dimensional non-Newtonian heat transfer and the dendritic growth theory in the undercooled melt were combined under the assumptions of a point nucleation on droplet surface and the macroscopically smooth solid-liquid interface enveloping the cell tips. It reproduced the main characteristic features of the reported microstructures quite well. It predicted a considerable volume fraction of segregation-free region in a droplet smaller than $l0{\mu}m$ if an initial undercooling larger than 100K is given. The volume fractions of the microcellular region($g_A$) and the sum of the microcellular and cellular region($g_a$) were predicted as functions of the heat transfer coefficient, h and initial undercooling, ${\triangle}T$. It was shown that $g_A$ and $g_a$, in the typical gas-atomization processes with $h=0.1-1.0W/cm^2K$, are dominated by ${\triangle}T$ and h, respectively, but for h larger than $4.0W/cm^2K$, a fully microcellular structure can be obtained irrespective of the initial undercooling.

• 한국연소학회지
• /
• 제18권3호
• /
• pp.9-23
• /
• 2013

A rotary kiln furnace is one of the most widely used gas-solid reactors in the industrial field. Although the rotary kiln is a versatile system and has different size, approach to the reactor modeling can be generalized in terms of flow motion of the solid and gas phases, heat transfer, and chemical reactions on purpose. In this paper, starting from a zero-dimensional model and extending to higher dimension and comprehensive models, overall procedure of the design development of rotary kiln reactors and considerations are presented. The approaches to performance analysis of the reactors are introduced and examples of application cases are presented.

• Korean Chemical Engineering Research
• /
• 제49권5호
• /
• pp.644-651
• /
• 2011

향후 도래할 수소경제에서 가장 유망한 기술 중에 하나인 고체수소저장 시스템들의 전체성능은 고체수소화물 내부의 열 및 물질전달 속도에 크게 영향을 받으며, 최적화된 시스템 설계를 위해서 이들에 대한 연구들이 선행되어야 한다. 본 연구에서는 Pt-CNTs 수소저장물질을 이용한 수소저장시스템에 대한 모델링 및 2차원 비정상상태 전산해석을 수행하였다. 기존 상용화된 CFD 소프트웨어를 이용하여 충전동안 발생하는 열 및 물질전달에 대한 현상들을 연구하였으며, 최적화된 수소저장시스템 설계는 고압에서 대류에 의한 냉각효과를 최대화하여 시스템 내부의 온도 상승과 충전시간 지연을 개선할 수 있음을 밝혀냈다. 아직까지 CNT 기반의 수소저장시스템에 대한 연구들이 보고되고 있지 않은 상황에서, 본 연구는 향후 CNT 기반의 고체수소저장시스템 최적 설계에 대한 방안들을 제시한다.

• 한국연소학회지
• /
• 제7권3호
• /
• pp.23-31
• /
• 2002

Processes in an iron ore sintering bed can characterized as a relatively uniform progress of fuel, cokes combustion and complicated physical change of solid particles. The sintering bed was modelled as an unsteady one-dimensional progress of the fuel layer, containing two phases: solid and gas. Coke added to the raw mix, of which the amount is about 3.5% of the total weight, was assumed to form a single particle with other components. Numerical simulations of the condition in the iron ore sintering bed were performed for various parameters: moisture contents, cokes contents and air suction rates, along with the various particle diameters of the solid for sensitivity analysis. Calculation results showed that the influence of these parameters on the bed condition should be carefully evaluated, in order to achieve self-sustaining combustion without high temperature section. The model should be extended to consider the bed structural change and multiple solid phase, which could treat the inerts and fuel particles separately.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제24회 KOSCO SYMPOSIUM 논문집
• /
• pp.171-178
• /
• 2002

Numerical simulations of the condition in the iron ore sintering bed are performed for various parameters. The sintering bed is modelled as an unsteady one-dimensional progress of solid material, containing cokes and iron ore. Bed temperature, solid mass and gas species distributions are predicted for various parameters of moisture contents, cokes contents and air suction rates, along with the various particle diameters of the solid for sensitivity analysis. Calculation results show that influences of these parameters on the bed condition should be carefully evaluated for achievement of the self-sustaining combustion without the high temperature section, which can cause the excessive melting in the bed. It suggests that the model should be extended to consider the bed structural change and multiple solid phase, which can treat the inerts and fuel particles separately.