• 분석과학
• /
• 제13권5호
• /
• pp.636-645
• /
• 2000

본 연구에서는 GC/MS를 이용하여 수질시료로부터 7종의 유기주석화합물을 분석하는 방법을 연구하였다. Hydrogenation과 ethylation의 반응시의 pH, 반응시간, 반응시약의 농도 등을 변화시켜 최적 반응조건을 조사하였다. n-Hexane을 용매로 사용한 액체-액체 추출 후 hydrogenation에 의한 유기주석염화물의 추출 회수율은 61-112% 범위로 나타났다. 물시료에서 ethylation한 후 n-hexane으로 추출한 경우의 추출 회수율이 74-113% 범위로 나타나 hydrogenation의 경우보다 높은 추출율을 보였다. 또한 ethylation후 styrene-divinylbenzene (SDB) 재질의 disk형의 고체상을 사용하고 추출 용매로 methylene chloride를 사용한 경우 61-97% 범위의 회수율을 나타냈다. Hydrogenation과 ethylation에 의한 검출한계는 각각 0.05-0.5 ng/ml와 0.02-0.05 ng/ml로 나타났다.

• 한국세라믹학회지
• /
• 제30권4호
• /
• pp.325-331
• /
• 1993

Aqueous solutions of metallic salts, ZrO(NO3)2.2H2O and Y(NO3)3.5H2O were used as raw materials to synthesize crystalline submicron spherical powders of Zr0.94Y0.06O1.97 with tetragonal crystal phase. Each aqueous solution was mixed on the magnetic stirrer to homogenize for 12 hours. The concentration of the mixed solutionwas changed from 0.01mol/$\ell$ to 0.1mol/$\ell$ calculated as the concentration of Zr0.94Y0.06O1.97. Ultrafine droplets of starting mixed solution were sprayed by the ultrasonic vibrator and carried into the furnace kept at 55$0^{\circ}C$, $650^{\circ}C$, 75$0^{\circ}C$ and 85$0^{\circ}C$ using carrier gas of air (10$\ell$/min) and pyrolysed to form Y-TZP fine powders. The results of this exeriment were as follows. 1) Synthesized powders were nonagglomerated and spherical type. 2) Particle size distribution was narrow between 0.1${\mu}{\textrm}{m}$ and 1${\mu}{\textrm}{m}$. 3) Forming reaction Y-TZP was finished above synthetic temperature 75$0^{\circ}C$. 4) As the synthetic temperature rised from 55$0^{\circ}C$ to 85$0^{\circ}C$, the mean particle size decreased from 0.35${\mu}{\textrm}{m}$ to 0.22${\mu}{\textrm}{m}$ in the concentration of starting solution with 0.02mol/$\ell$. 5) At 75$0^{\circ}C$ of synthetic temperature, the concentration changes of starting solution from 0.01mol/$\ell$ to 0.1mol/$\ell$ increased the mean particle size from 0.24${\mu}{\textrm}{m}$ to 0.38${\mu}{\textrm}{m}$. 6) Chemical compositions of each synthesized particle were homogeneous nearly.

• 연구논문집
• /
• 통권30호
• /
• pp.111-119
• /
• 2000

Y-Si oxide 및 oxynitride를 소결 조제로 첨가하여 질소를 함유하는 액상이 알루미나의 소결에 미치는 영향에 대하여 조사하였다. $1400^{\circ}C$에서 하소된 소결 조제의 주 결정상은 $Y_2$$O_3$와 $SiO_2$의 반응에 의하여 생성된 $\alpha$-$Y_2$ $Y_2$$O_7$이며, N의 함량이 높은 Si-40N은 $\alpha$-$Y_2$$O_3$와 함께 Y-N apatite가 생성된다 소결과정에서 소결 조제로 알루미나의 일부와 반응하여 액상을 형성하며, 알루미나는 액상에 의하여 소결이 촉진된다. SEM으로 미세구조를 관찰한 결과 산화물 소결조제(Si-0N)를 첨가한 알루미나는 균일한 입자성장을 보이지만 oxynitride 소결소재(Si-20N 및 Si-40N)를 첨가한 알루미나는 비정상 입자성장을 일으켜 bimodal 구조를 나타내었으며, N의 함량이 높을수록 비정상 입자성장은 심하게 나타났다. 질소의 함량이 높은 Si-40N 조성의 소결 조제를 첨가한 알루미나는 bloating이 나타나며, 이것은 액상에 녹지 않는 과잉의 질소가 방출되기 때문이다.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2005년도 춘계 학술대회
• /
• pp.139-145
• /
• 2005

In the study, in order to deposit TaN thin film using diffusion barrier and bottom electrode we made the Plasma Assisted ALD equipment and confirmed the electrical characteristic of TaN thin films deposited PAALD method, PAALD equipment depositing TaN thin film using PEMAT(pentakis(ethylmethlyamlno) tantalum) Precursor and $NH_3$ reaction gas is aware that TaN thin film deposited of high density and amorphous phase with XRD measurement The degree of diffusion and react ion taking place in Cu/TaN(deposited using 150 W PAALD)/$SiO_2$/Si systems with increasing annealing temperature was estimated from MOS capacitor property and the $SiO_2(600\;\AA)$/Si system surface analysis by C-V measurement and secondary ion material spectrometer(SIMS) after Cu/TaN/$SiO_2(400\;\AA)$ system etching. TaN thin film deposited PAALD method diffusion barrier have a good diffusion barrier property up to $500^{\circ}C$.

• Journal of Microbiology and Biotechnology
• /
• 제23권4호
• /
• pp.473-482
• /
• 2013

The desulfurization ability of Sphingomonas subarctica T7b was evaluated using resting and immobilized cells with dibenzothiophene (DBT), alkyl DBTs, and commercial light gas oil (LGO) as the substrates. The resting cells of S. subarctica T7b degraded 239.2 mg of the initial 250 mg of DBT/l (1.36 mM) within 24 h at $27^{\circ}C$, while 127.5 mg of 2-hydroxybiphenyl (2-HBP)/l (0.75 mM) was formed, representing a 55% conversion of the DBT. The DBT desulfurization activity was significantly affected by the aqueous-to-oil phase ratio. In addition, the resting cells of S. subarctica T7b were able to desulfurize alkyl DBTs with long alkyl chains, although the desulfurization rate decreased with an increase in the total carbon number of the alkylated DBTs. LGO with a total sulfur content of 280 mg/l was desulfurized to 152 mg/l after 24 h of reaction. Cells immobilized by entrapment with polyvinyl alcohol (PVA) exhibited a high DBT desulfurization activity, including repeated use for more than 8 batch cycles without loss of biodesulfurization activity. The stability of the immobilized cells was better than that of the resting cells at different initial pHs, higher temperatures, and for DBT biodesulfurization in successive degradation cycles. The immobilized cells were also easily separated from the oil and water phases, giving this method great potential for oil biodesulfurization.

• 한국결정성장학회지
• /
• 제18권1호
• /
• pp.27-32
• /
• 2008

새로운 $CaZrO_3:Er^{3+}$ 축광성 형광체를 전통적인 고상반응법으로 제조하였으며, 분쇄한 축광성 형광체를 X 선 회절 분석, 광발광 분석, 열발광 분석과 휘도계를 통하여 장잔광 특성을 분석하였다. X 선 회절 분석 결과 순수한 $CaZrO_3$ 결정상을 확인 하였으며, 고온의 질소 분위기에서 합성한 경우 446 nm 와 550 nm의 넓은 발광 피크가 나타났다. 합성한 장잔광 특성의 형광체의 발광 지속시간은 254 nm UV lamp로 여기 시킨 후 어두운 곳에서 6시간 이상 스스로 발광 하였다. 발광 피크는 $Er^{3+}$ 이온의 $^5D_{5/2}{\rightarrow}^4F_{9/2},\;^2H_{12/2},\;^4S_{3/2}{\rightarrow}^4I_{13/2}$ 그리고 $^2G_{9/2}{\rightarrow}^4I_{13/2}$ 전이에 의한 것이며, 잔광 특성은 $CaZrO_3$ 격자 내에 적당한 trap center가 형성 된 것으로 판단된다.

• Bulletin of the Korean Chemical Society
• /
• 제31권4호
• /
• pp.808-814
• /
• 2010

Activities of nanostructure HZSM-5 and Co-ZSM-5 catalysts (with different Co-loading) for catalytic conversion of ethyl acetate and toluene were studied. The catalysts were prepared by wet impregnation method and were characterized by XRD, BET, SEM, TEM and ICP-AES techniques. Catalytic studies were carried out inside a U-shaped fixed bed reactor under atmospheric pressure and different temperatures. Toluene showed lower reactivity than ethyl acetate for conversion on Co-ZSM-5 catalysts. The effect of Co loading on conversion was prominent at temperatures below $400^{\circ}C$ and $450^{\circ}C$ for ethyl acetate and toluene respectively. In a binary mixture of organic compounds, toluene and ethyl acetate showed an inhibition and promotional behaviors respectively, in which the conversion of toluene was decreased at temperatures above $350^{\circ}C$. Inhibition effect of water vapor was negligible at temperatures above $400^{\circ}C$. An artificial neural networks model was developed to predict the conversion efficiency of ethyl acetate on Co-ZSM-5 catalysts based on experimental data. Predicted results showed a good agreement with experimental results. ANN modeling predicted the order of studied variable effects on ethyl acetate conversion, which was as follows: reaction temperature (50%) > ethyl acetate inlet concentration (25.085%) > content of Co loading (24.915%).

• 한국세라믹학회지
• /
• 제44권5호
• /
• pp.155-159
• /
• 2007

Blue light-emitting phosphors having the excitation spectrum range of the medium-long ultraviolet ($280nm{\sim}400nm$) have been prepared by solid state reaction method. As a starting material the natural alkaline feldspar powder produced from the domestic mine field in Buyeo, Chungnam-do. The photoluminescence characteristics and crystal structures have been analyzed for the phosphor samples. The powder mixture of the natural alkaline feldspar and the rare-earth oxide was calcined at $800{\sim}1000^{\circ}C\;for\;3{\sim}4h$ in air. The calcined samples we fully ground at room temperature and then heat-treated in the mild reducing gas atmosphere of $5%H_2-95%N_2$ mixture at $1100{\sim}1150^{\circ}C\;for\;3{\sim}4h$. The natural alkaline feldspar material consists of the monoclinic orthoclase ($KAlSi_3O_8$) and the triclinic albite ($NaAlSi_3O_8$) phases. At the $0.5wt%Eu_2O_3$ addition the PL spectrum showed the maximum intensity and with further increase of $Eu_2O_3$ the PL intensity decreased. The albite phase disappeared in the $Eu_2O_3$ doped phosphors. The effect of the co-doped activator on the PL characteristics have been also discussed.

• 조명전기설비학회논문지
• /
• 제20권6호
• /
• pp.69-74
• /
• 2006

[ $Mg_2Ni$ ] 합금 및 $Mg_2Ni$와 카본 혼합물 입자의 수소저장 특성에 대한 기계적 분쇄(MG, Mechanical Grinding) 처리 효과를 고온 가스상의 PCT 측정 및 전기화학적인 마이크로 전극 측정법 등에 의해 검토되었다. PCT 측정은 약 $300[^{\circ}C]$의 고온에서 실시되었으며 전기화학적인 실험은 카본-섬유로 구성된 마이크로 전극을 1M KOH 수용액 속에서 조정자를 사용하여 MG 처리한 합금 단일입자에 접촉시켰다. 그 결과 $Mg_2Ni$ 합금과 카본 혼합물 입자의 경우 가스상에서 수소 해리압이 감소하고 상온에서 전기화학적인 수소화 특성이 크게 개선되었다. 이것은 기계적 분쇄(MG) 작용에 의한 합금의 미세화 및 나노화에 기인한다고 판단된다. 즉 고온 가스상의 PCT 측정 결과 수소 해리압이 MG 처리에 의해 0.55[MPa]에서 0.42[MPa]로 감소하였으며 동일 샘플 입자에 대해 마이크로 전극에 의한 평가에서도 수소화 피크가 보다 분명하게 관찰되었다.

• 센서학회지
• /
• 제32권3호
• /
• pp.140-146
• /
• 2023

Water quality is crucial for human health and the environment. Accurate measurement of the quantity of organic carbon in water is essential for water quality evaluation, identification of water pollution sources, and appropriate implementation of water treatment measures. Total organic carbon (TOC) analysis is an important tool for this purpose. Although other methods, such as chemical oxygen demand (COD) and biochemical oxygen demand (BOD) are also used to measure organic carbon in water, they have limitations that make TOC analysis a more favorable option in certain situations. For example, COD requires the use of toxic chemicals, and BOD is time-consuming and can produce inconsistent and unreliable results. In contrast, TOC analysis is rapid and reliable, providing accurate measurements of organic carbon content in water. However, common methods for TOC analysis can be complex and energy-intensive because of the use of high-temperature heaters for liquid-to-gas phase transitions and the use of acid, which present safety risks. This study focuses on a TOC analysis method using TiO₂ photocatalysis, which has several advantages over conventional TOC analysis methods, including its low cost and easy maintenance. For TiO₂, rutile and anatase powders are mixed with an inorganic binder and spray-coated onto a glass fiber substrate. The TiO₂ powder and inorganic binder solutions are adjusted to optimize the photocatalytic reaction performance. The TiO₂ photocatalysis method is a simple and low-power approach to TOC analysis, making it a promising alternative to commonly used TOC analysis methods. This study aims to contribute to the development of more efficient and cost-effective approaches for water quality analysis and management by exploring the effectiveness and reliability of the developed equipment.