• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.173-176
• /
• 1999

Continuing improvement of microprocessor performance involves in the devece size. This allow greater device speed, an increase in device packing density, and an increase in the number of functions that can reside on a single chip. However this has led to propagation delay, crosstalk noise, and power dissipation due to resistance-capacitance(RC) coupling become significant due to increased wiring capacitance, especially interline capacitance between the metal lines on the same metal level. Becase of pattering MSSQ (Methylsilsequioxane), we use RIE(Reactive ton Etching) which is a good anisotrgpy. In this study, according as we control a flow rate of CF$_4$/O$_2$ gas, RF power, we analysis by using ${\alpha}$ -step, SEM and AFM,

• 통합자연과학논문집
• /
• 제2권4호
• /
• pp.275-279
• /
• 2009

Recently, number of studies for porous silicon (PSi) have been investigated by many researchers. Multistructured porous silicon such as a distributed Bragg reflector (DBR) PSi, has been a topic of interest, because of its unique optical properties. DBR PSi were prepared by using an electrochemical etch of $P{^+}{^+}$-type silicon wafer with resistivity between 0.1 and $10m{\Omega}cm$. The electrochemical etch with square wave current density results in two different refractive indices in the porous layer. In this work, DBR porous silicon chips for a simple and portable organic vapor-sensing device have fabricated. The optical characteristics of DBR PSi have been investigated. DBR porous silicon have been characterized by FT-IR and Ocean optics 2000 spectrometer. The device used DBR PSi chip has been demonstrated as an excellent gas sensor, showing a great senstivity to organic vapor at room temperature.

• 천문학회보
• /
• 제46권2호
• /
• pp.43.1-43.1
• /
• 2021

Using 74 galaxy clusters in the COSMOS field at 0.1 < z < 1.2, we calculate the environmental quenching timescale, defined as the time required after a galaxy is accreted by a cluster for it to stop star formation. Cluster candidates are selected as the overdensities with the surface number density exceeding the 4-σ. With the "delayed-then-rapid" quenching model, we can successfully reproduce the separation of the galaxies(star-forming, intermediate, and quiescent) on the NUV-R - R-J color plane comparing with the BC03 evolutionary track. With the mass growth rate of halo mass and the ratio of categorized galaxies, we can constratin the environmental quenching timescale ~ 2Gyr at z ~ 1. We will present the result as a function of redshift and compare them with dynamical timescale and gas depletion timescale.

• 천문학회보
• /
• 제46권1호
• /
• pp.52.3-53
• /
• 2021

It is yet to be understood what controls the star formation activity in high-redshift galaxy clusters. One recently proposed mechanism is that the star formation activity in galaxy clusters are fed by gas and galaxies in large-scale structures surrounding them, which we call as "web feeding model". Using galaxies in the COSMOS2015 catalog, with mass completeness at log(M/M_⦿)≥9.54 and reliable photometric redshift data (σ_Δz/(1+z) ≲ 0.01), we study the star formation activities of galaxy clusters and their surrounding environment to test the web feeding model. We first identify the overdense regions with number density exceeding the 4σ-level from photometric redshift data as galaxy clusters, and we find that they are well matched with clusters identified in the X-ray extended source catalog. Furthermore, we identify galaxy large scale structures, and will present the correlation or anti-correlation between quiescent galaxy fraction, an indicator of star-forming activity, and the prevalence of galaxy large scale structures.

• 대한조선학회논문집
• /
• 제39권1호
• /
• pp.16-27
• /
• 2002

이유체 비압축성 점성 유동장내에서의 이차원 기포의 운동과 변형을 레벨셋 방법을 도입하여 해석하였다. 지배방정식은 유한체적법을 사용하여 해석하였다. 본 방법의 수치계산결과는 발표된 실험결과와 계산결과의 비교를 통해 검증하였다. 수치계산에서는 초기상태에 유동장 내에 두 유체의 비교란 자유표면이 존재할 때 단일 및 다수의 기포의 운동과 변형을 해석하였다. 해석을 통해 표면장력의 변화와 밀도비의 변화에 따른 기포거동의 변화를 살펴볼 수 있었다. 자유표면은 기포가 자유표면으로 상승할 때 기포의 거동에 큰 영향을 끼친다. 레벨셋법을 사용하여 계산된 본 연구의 결과들을 통해서 기포거동의 특성을 살펴볼 수 있었다.

• 대한기계학회논문집
• /
• 제18권3호
• /
• pp.662-669
• /
• 1994

In the combustion system, the optimum spray conditions reduce the pollutant emission of exhaust gas and enhance the fuel efficiency. The spray characteristics-the drop size, the drop velocity, the number density and the mass flux, become increasingly important in the design of combustor and in testifying numerical simulation of spray flow in the combustor. The purposes of this study are to clarify the spray characteristics of twin-fluid nozzle and to offer the data for combustor design and the numerical simulation of a spray flow. Spatial drop diameter was measured by immersion sampling method. The mean diameter, size distribution and uniformity of drop were analyzed with variations of air/liquid mass flow ratio. The results show that the SMD increases with the liquid supply flow rate and decreases with the air supply velocity. The radial distribution of SMD shows the larger drops can diffuse farther to the boundary of spray. And the drop size range is found to be wider close to the spray boundary where the maximum SMD locates.

• 에너지공학
• /
• 제13권2호
• /
• pp.112-117
• /
• 2004

휘발성 유기물질은 도장공정, 염색, 건조공정 등 화학공정에서 발생하는 저발열량 가스이다 VOCs의 특징은 발열량이 150kcal/㎥ 이하이며 착화를 위한 활성화 에너지가 높고 발생 에너지가 낮다는 것이다. 따라서 연소 안정성은 낮아지고 처리공정은 고에너지 소비공정이 된다. Cyclone연소시스템은 연소기 내에 강한 선회 유동을 만들어서 에너지를 순환시켜 활성화에너지를 낮추어주고 열밀도가 높아 일반적인 swirl 연소 시스템에 비해 고온의 연소온도를 유지할 수 있으며 혼합성을 향상시킨다 본 논문에서는 휘발성 유기물질의 열산화를 위해 최적의 cyclone 연소시스템을 개발하는 것을 목적으로 수행되었으며 특별히 설계된 연소기에서 연소온도와 배가스 조성에 미치는 swirl number의 영향을 정립하였다.

• Journal of Electrical Engineering and Technology
• /
• 제1권4호
• /
• pp.528-533
• /
• 2006

Electrical discharges may occur in gas, liquid as well as solid insulating materials. This paper describes the investigation results on the discharges in air, silicone oil and low density polyethylene (LDPE) using needle plane electrode system under AC voltage of 50 Hz. The experimental results showed that for discharge in air (corona), discharge pulses were concentrated around the peak of applied voltage at negative half cycle. For silicone oil positive as well as negative discharges were observed which concentrated around the peak of applied voltage. The positive pulse number was smaller but the magnitude was higher than that of negative discharge. Discharges in void took place at wider range of phase of applied voltage. The unbalance in pulse number and magnitude similar to that of oil discharges were observed. For electrical treeing in LDPE, the discharges were spread before the zero cross of the applied voltage up to the peak at both positive and negative half cycles. The discharge pulse sequence analysis indicated that the PD occurrence in air, oil and void were strongly affected by the magnitude of applied voltage. However, for electrical treeing it was observed that the discharge occurrence was strongly affected by the time derivative of the applied voltage (dv/dt).

• 한국CDE학회논문집
• /
• 제20권1호
• /
• pp.36-43
• /
• 2015

Recently, a number of evaluation studies on availability of plant were carried out. This study was conducted to verify of the reliability of a simulation with some variable such as configuration of process, failure probability density function and the number of iteration times for the natural gas liquefaction plant. The error rate of the KICT-RAM solution was evaluated as 0.03~1.79% compared with the result of the MAROS(commercial solution). And the error-rate change was observed in the range of 0.03~1.75 on the condition of the iteration times as 30, 100, 250. As a result the plant availability evaluation approach of KICT-RAM solution was verified as reasonable. However, the careful approach was required to use the solution because the error-rate increased according to iteration times change.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.327-334
• /
• 2004

Spectroscopic and electrostatic probe measurements were made to examine plasma characteristics with or without a metal plate for a 10-㎾-class direct-current arcjet Heat fluxes into the plate from the plasma were also evaluated with a Nickel slug and thermocouple arrangement. Ammonia and mixtures of nitrogen and hydrogen were used. The NH$_3$ and $N_2$+3H$_2$ plasmas in the nozzle and in the downstream plume without a plate were in thermodynamical nonequilibrium states. As a result, the H-atom electronic excitation temperature and the $N_2$ molecule-rotational excitation temperature intensively decreased downstream in the nozzle although the NH molecule-rotational excitation temperature did not show an axial decrease. Each temperature was kept in a small range in the plume without a plate except for the NH rotational temperature for NH$_3$ gas. On the other hand, as approaching the plate, the thermodynamical nonequilibrium plasma came to be a temperature-equilibrium one because the plasma flow tended to stagnate in front of the plate. The electron temperature had a small radial variation near the plate. Both the electron number density and the heat flux decreased radially outward, and an increase in H$_2$ mole fraction raised them at a constant radial position. In cases with NH$_3$ and $N_2$+3H$_2$ a large number of NH radical with a radially wide distribution was considered to cause a large amount of energy loss, i.e., frozen flow loss, for arcjet thrusters.