• 제목/요약/키워드: Gas discharges

검색결과 119건 처리시간 0.027초

반응표면법을 이용한 안전밸브의 최적화 (Optimal Design of the Safety Valve by Response Surface Method)

  • 이상우;신대영;변철웅
    • 한국전산구조공학회논문집
    • /
    • 제20권5호
    • /
    • pp.551-556
    • /
    • 2007
  • 소화시스템에 사용되는 고압의 소화가스 저장용기에는 저장용기의 파손을 막아주는 안전밸브가 있다. 이러한 안전밸브의 내부에는 원형 박판의 파열 판이 들어 있는데, 저장용기의 내압이 위험수준에 도달하면 파열 판이 파손하여 내압을 배출하는 역할을 한다. 안전밸브의 설계인자는 파열 판의 두께, 안전밸브의 유로 직경, 플라스틱 패킹 링의 내부 직경 그리고 파열 판을 고정하는 볼트 안쪽의 필렛 반경이 있다. 이중에서 파열 판의 두께는 0.2mm로 고정을 하였다. 요인배치법을 사용하여 주효과를 결정하였고 회귀방정식을 유도하였다. 이러한 회귀방정식은 추후 안전밸브의 설계에 있어서 기초 설계 자료로서 활용할 수 있도록 실험 결과와 비교하여 검증하였다. 검증실험 및 회귀방정식에 의한 결과의 오차는 약 $2{\sim}5%$ 정도인 것을 확인하였다. 그리고 반응표면법을 사용하여 기밀테스트 압력인 25MPa에서 파열할 수 있는 안전밸브의 최적 모델을 결정하였다.

호이산화탄소성 Streptococcus equi subspecies equi에 의한 선역의 발생 (Outbreaks of Strangles due to Capnophilic Streptococcus equi subsp equi in South Korea)

  • 문자호;김정희
    • 한국임상수의학회지
    • /
    • 제32권1호
    • /
    • pp.41-44
    • /
    • 2015
  • 이 연구는 더러브렛 말에서 호이산화탄소성 Streptococcus equi subsp equi 에 기인한 선역의 발생에 관한 보고이다. 3개의 다른 농장에서 선역의 전형적인 증상인 림프절 화농이 있거나 없는 29두의 말에서 17 균주의 S equi subsp equi를 분리하였다. 이들 중 임상증상이 있는 1두에서 분리한2균주는 호기배양에서 분리되었으나, 임상증상이 있는 6두에서 분리한 7균주와 임상증상이 없는 22두에서 분리한 8균주는 호기조건에서 배양되지 않았다. 이 15 분리균주는 일반 호기배양기에서는 증식하지 않았으며, 5% $CO_2$배양기, 산소분압을 낮추는 candle jar 및 GasPak을 이용한 혐기배양에서 증식하는 호이산화탄소성, 산소민감성 또는 이산화탄소 요구성 S. equi subsp. equi로 판명되었다. 이 연구는 호이산화탄소성 S. equi subsp. equi 에 의한 선역발생에 관한 최초의 보고이다.

방사선 위치 검출센서의 제작 및 특성 (Fabrication and Characteristics of X-ray Position Detection Sensor)

  • 박형준;김인수
    • 전기전자학회논문지
    • /
    • 제19권4호
    • /
    • pp.535-540
    • /
    • 2015
  • 디지털 X-선 촬영 장치에 응용되는 MSGC형 검출기를 설계 및 제작하였다. 기판의 재질은 실리콘기판과 유리기판을 사용하였으며, 기판위에 증착된 전극물질은 포토리소그래피 공정을 이용하였으며, 크롬을 전극의 재료를 이용하였다. 양전극의 폭은 $10{\mu}m$, 음전극의 폭은 $290{\mu}m$로 각각 제작하였다. 양전극과 음전극 사이의 거리는 $100{\mu}m$ 이고, 검출기의 유효영역은 $50{\times}50mm^2$로 설계하였다. 그리고 양전극의 수는 80개로 하였고, 양전극의 전압이 600 Volt 이상 인가한 경우 양전극과 음전극 부분이 방전되어 끊어진 현상을 확인하였다. 결과적으로 검출기체인 Ar(90%) + $CH_4$(10%) 기체 하에서 X-선관의 전압은 42 kV, 최대전류 1 mA까지 인가하여 연구를 수행하였다.

High Efficacy AC-PDP toward 10 lm/W

  • Choi, Kyung-Cheol;Lee, Seung-Tae;Shin, Nam-Hoon;Lee, Seong-Min;Song, Sang-Cheol;Yun, Jin-Bhum;Shin, Bhum-Jae
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
    • /
    • pp.7-12
    • /
    • 2006
  • The high efficacy concept, featuring in this study an auxiliary electrode and a 200 ${\mu}m$ coplanar gap, is applied to AC-PDPs with a stripe - type and a closed - type barrier rib, respectively. The roles of the pulses applied to the auxiliary electrode create additional excitation during the sustain period and reduce a discharge current that flows into the display cells. The efficacy of the proposed panel with the closed barrier rib has maximum values when the auxiliary pulse voltage is 50 volts and 80 volts for the Ne+4%Xe and Ne+20%Xe gas-mixtures, respectively. The maximum luminous efficacy is more than 10 lm/W in terms of the measurement of the discharges in VGA resolution ($540{\mu}m{\times}720{\mu}m$) and the green cells.

  • PDF

Effects of Neon Plasma Emission on Optical Properties of Phosphor Layers in Surface-Type Alternate Current Plasma Display Panel

  • Jang, Sang-Hun;Cho, Ki-Duck;Tae, Heung-Sik;Park, Lee-Soon
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
    • /
    • pp.171-174
    • /
    • 2000
  • This study uses neon and xenon gas mixture discharges to determine the effects of the neon plasma emission on the characteristics of visible emission from the stimulation of the red, green, blue(RGB) phosphor layers in a surface-type alternate current plasma display panel(AC PDP). With a mixture of less than 2% xenon to neon, it is found that the luminance changes in the visible emission of the phosphor layers are similar to those of the neon plasma emission. In the range of xenon mix ratio from 2 to 5%, the luminance of the red, green, blue(RGB) phosphor layers decreases with a decrease in the neon plasma emission intensity. However, with a mixture of above 5% xenon to neon, the luminance of the red, green, blue(RGB) phosphor layers increases regardless of a decrease in the neon plasma emission intensity. Furthermore, the color purity of the red, green, blue(RGB) phosphor layers improve as the neon plasma emission intensity decreases. Accordingly, it is concluded that the optical properties of the phosphor layers, including color purity and luminance, depend on the neon plasma discharge emission as well as the visible emission from the stimulation of the phosphor layers.

  • PDF

가변 연소면적 DACS의 압력 제어 기법 (Control Method for DACS with Variable Burning Area)

  • 기태석;박익수;허준영;진정근
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2017년도 제48회 춘계학술대회논문집
    • /
    • pp.368-373
    • /
    • 2017
  • 본 논문에서는 연소 면적이 시간에 따라 변하는 DACS의 압력 제어 기법을 설계하고 시뮬레이션을 통해 설계된 제어 기법의 성능을 확인하였다. 일반적으로 고체 추진제를 탑재한 DACS는 연소 면적이 일정하도록 설계된다. 이러한 경우 압력 및 추력 제어가 용이하다는 장점은 있으나, 추진제 연소에 의해 생성된 연소 가스가 추력 발생에 사용되지 않고 그대로 배출되는 경우가 발생한다. 따라서 그레인 형상의 최적화 설계가 필요하며, 이러한 경우 연소 면적이 시간에 따라 변하게 된다. 가변하는 연소 면적을 외란으로 가정할 수 있으며 이러한 시스템에 대하여 적응 제어 기법을 적용할 경우 효과적으로 연소관 내부 압력을 제어할 수 있다.

  • PDF

낮은 스위칭 손실을 가지는 고성능 AC-PDP 구동 회로에 관한 연구 (High Performance AC-PDP Sustain Driver with Low switching Loss)

  • 강필순;박성준;박한웅;김철우
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 춘계합동학술대회 논문집
    • /
    • pp.50-56
    • /
    • 2002
  • When the plasma panel is used as a display, frequent discharging are made to occur by alternatively charging each side of the panel to a critical voltage, which causes repeated gas discharges to occur. In this paper, an efficient sustain driver is proposed to achieve a faster rise-time in order to be suitable to widely used ADS driving method. The proposed circuit increases an operational margin up to 20 % compared with conventional approaches improving the recovery efficiency regardless of the variation of panel capacitance. Thanks to the increased operational margin, the brightness decrease problem can be solved without a limitation to sustain pulse width. The principle of operation, and features are illustrated, and verified on a 7.5 inch diagonal panel at 200 kHz operating frequency - based on experimental prototype.

  • PDF

카오스이론을 이용한 GIS 내부 절연결함 판별 (Discrimination of insulation defects in a Gas Insulated Switchgear (GIS) by use of a neural network based on a Chaos Analysis of Partial Discharge(CAPD))

  • 임윤석;이동일;구자윤;김정태;방항권
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
    • /
    • pp.2223-2225
    • /
    • 2005
  • In this work, experimental investigation has been mainly done. For this purpose, UHF sensor has been designed and fabricated to detect the partial discharges produced from the 10 artificial defects introduced into the real scale 70kV GIS mock-up under the high voltage at the well shielded room. And also, in order to verify the applicability of the proposed method at the site, the proposed CAPD (chaos analysis of partial discharge) is combined with spectral analysis method in order to identify the nature of the above 10 defects. The PD pattern recognition of each defect has been fulfilled by applying self developed artificial neural network soft ware. The result shows that the recognition rate is reached to be 80% by newly proposed method while the traditional PRPD analysis method leads us to obtain 41%. In consequence, it can be pointed out that the proposed method seems likely to be applicable to the real GIS at the site.

  • PDF

스페이서에 Metal flange가 있는 GIS에서의 UHF PD 측정 기술 연구 (A study on the UHF PD measuring technique for GIS with a metal flange around insulating spacer)

  • 강원종;이창준;강윤식;박종배;이희철;박종화
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 하계학술대회 논문집 C
    • /
    • pp.1638-1640
    • /
    • 2003
  • In the recent years, UHF PD measuring technique for detecting partial discharges was proved the effective method for Gas Insulated Switchgear (GIS). However, in case of GIS with a metal flange around insulating spacer, UHF PD measurement using typical external UHF PD sensor is difficult. In this paper, a novel hole-type UHF PD sensor based on Archimedean spiral antenna theory has been proposed and realized. All spacers with metal flange have small hole in order to inject epoxy. Using the novel hole-type UHF PD sensor, it makes detection possible to PD signal that are emitted through the epoxy injection hole. Additionally, the measuring characteristic of UHF PD signals from several artificial defects in GIS and the novel ${\Phi}$-f-q pattern analysis technology are discussed.

  • PDF

배전반 설비의 온라인 모니터링 및 진단의 동향 (Trend in Off-Line PD Monitoring with HVAC Testing)

  • 윤주효;홍창일;황종선;최용성;이경섭
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
    • /
    • pp.529-530
    • /
    • 2007
  • The paper considers the relation between on-line monitoring and diagnostics on the one hand and high-voltage (HV) withstand and partial discharge (PD) on-site testing on the other. HV testing supplies the basic data (fingerprints) for diagnostics. In case of warnings by on-line diagnostic systems, off-line withstand and PD testing delivers the best possible information about defects and enables the classification of the risk. Because alternating voltage (AC) is the most important test voltage, the AC generation on site is considered. Frequency tuned resonant (ACRF) test systems are best adapted to on-site conditions. They can be simply combined with PD measuring equipment. The available ACRF test systems and their application to electric power equipment -from cable systems to power transformers - is described.

  • PDF