• 제목/요약/키워드: Gas Saturation

검색결과 274건 처리시간 0.027초

가스-펠릿 초미세 발포 사출 플라스틱 특성 연구 (A Study on the Relation between Cell morphology and Saturation condition in Gas-pellets MCPs)

  • 차성운;서정환
    • 한국정밀공학회지
    • /
    • 제22권12호
    • /
    • pp.87-92
    • /
    • 2005
  • In microcellular injection molding, gas supply system is needed. But, that device is very expensive to attach to the injection molding machines. So, new method is needed and gas-pellets MCPs is one of the solutions. In gas-pellets MCPs, there will be strange characteristics. In this paper, some characteristics are described on the view point of saturation pressure and saturation time.

수소연료전지 자동차 압력 용기용 전자밸브의 온도 특성에 관한 연구 (A Study on Temperature Characteristics of Automatic Valve for High Pressure Cylinder of FCV)

  • 이효렬;안중환;김화영;김영구
    • 한국가스학회지
    • /
    • 제22권1호
    • /
    • pp.1-8
    • /
    • 2018
  • 수소연료전지 자동차 압력 용기에는 연료전지 스택으로 수소의 흐름을 제어하기 위해 전자 밸브가 부착되고 있다. 전자 밸브의 솔레노이드는 전기 신호에 의해 유로를 개폐하는 역할을 하며, 전원이 인가되는 시간이 경과함에 따라 온도가 상승하여 일정 온도에서 포화된다. 특히 온도의 상승은 솔레노이드의 흡인력을 감소시키므로 안정적인 수소 공급을 위해서 설계 시 포화 온도와 온도에 따른 흡인력 특성 파악이 요구된다. 본 연구에서는 솔레노이드 설계 변수에 따른 포화 온도 계산식을 제안하고 열 유동 해석을 통해 타당성을 확인하였다. 또한, 온도에 따른 흡인력 변화를 분석하기 위해 전자기장 해석을 수행하였으며 온도 특성 실험을 통해 포화 온도와 흡인력 해석 결과를 검증하였다. 포화온도는 계산식과 해석결과를 비교하였을 때 $5.3^{\circ}C$, 해석 결과와 실험 결과를 비교하였을 때 $5.9^{\circ}C$의 오차가 발생하였으며, 흡인력은 1.0 N, 최대 2.1 N의 오차가 발생하였다.

토양내 총 NAPL과 공기접촉 NAPL의 측정을 위한 분별 NAPL 분배 추적자 기술의 개발

  • 최경민;김헌기
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2004년도 임시총회 및 추계학술발표회
    • /
    • pp.29-32
    • /
    • 2004
  • Gaseous partitioning tracer test has been used for determining the volume and spatial distribution of residual non-aqueous phase liquid (NAPL) in the unsaturated soils. In this study, an experimental method for measuring the content of gas-exposed NAPL as well as that of total NAPL in a sand during air sparging was developed. Two different gaseous phase NAPL-partitioning tracers were used; n-pentane, with very low water solubility, was used as the tracer that partitions into NAPL that is only in contact with the mobile gas, and chloroform, with fairly good water solubility, was selected for detecting total NAPL content in the sand. Helium and difluromethanewere used as the non- reactive tracer and water-partitioning tracers, respectively. Using n-decane as a model NAPL (NAPL saturation of 0.018), 25.6% of total NAPL was detected by n-pentane at the water saturation of 0.68. Oniy 9.1% of total NAPL was detected by n-pentane at the water saturation of 0.84. This result implies that the quantity of gas-exposed NAPL increased about three times when the water saturation decreased from 0.84 to 0.68. At the water saturation of 0.68, more than 90% of total NAPL was detected by chloroform while 65.8% of total NAPL was detected by chloroform at the water saturation of 0.84. Considering that the removal rate of NAPL during air sparging for NAPL-contaminated aquifer is expected to be greatly dependent upon the spatial arrangement of NAPL phase with respect to the mobile gas, this new approach may provide useful information for investigating the mass transfer process during air-driven remedial processes fer NAPL-contaminated subsurface environment.

  • PDF

일산화탄소중독시(一酸化炭素中毒時) 폐(肺)로 부터의 일산화탄소(一酸化炭素) 방산(放散)에 관(關)하여 (Elimination of CO through the Lung in CO Poisoned Dog)

  • 강반;김근주;여웅연
    • The Korean Journal of Physiology
    • /
    • 제1권2호
    • /
    • pp.185-191
    • /
    • 1967
  • In order to evaluate the elimination of CO through the lung comparing with the decrease of CO content in the blood, authors had induced acute CO poisoning on 9 dogs. Arterial CO-Hb saturation, CO concentration, %, in expired gas and eliminated CO amount through the lung were measured at 1,5,10,30,60, and 120 minutes after acute CO poisoning in 6 dogs breathing room air and 3 dogs breathing room air and oxygen alternately. Results obtained are summarized as follows. In room air breathing group, arterial CO-Hb saturation averaged 50.8% , and 53.67 ml of CO was blew off through the lung during 120 minutes and in alternately air and oBygen breathing group, the arterial CO-Hb saturation averaged 65.6% and 95.6 ml of CO was blew off through the lung. The amount of CO eliminated in expired gas for 120 minute was much less than the amount of decreased CO in arterial blood which was calculated with the decreased CO-Hb content in the estimated circulating blood volume. Such difference between the amount of eliminated CO in expired gas and the decreased CO in blood might be attributed to the oxidation of CO to $CO_2$ in the tissues. Concentration of CO in expired gas was markedly increased and the rate of decrease in arterial CO-Hb saturation is enhanced by oxygen breathing. In early period of recovery from acute CO poisoning, neither the CO concentration in expired gas, nor, the rate of CO elimination (unlit 2 minutes after CO poisoning) showed close correlation with the blood CO-Hb saturation level. The reason seemed to be due to irregularly depressed or unevenly stimulated respiration which were induced by acute CO poisoning.

  • PDF

토양 내 PCE 제거과정에서 가스 분배추적자기법을 이용한 공기노출 PCE의 잔류량 검출 (Measurement of Gas-Accessible PCE Saturation in Unsaturated Soil using Gas Tracers during the Removal of PCE)

  • 김헌기;권한준;송영수
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제16권5호
    • /
    • pp.42-52
    • /
    • 2011
  • In this laboratory study, the changes in gas-exposed perchloroethene (PCE) saturation in sand during a PCE removal process were measured using gaseous tracers. The flux of fresh air through a glass column packed with PCEcontaminated, partially water-saturated sand drove the removal of PCE from the column. During the removal of PCE, methane, n-pentane, difluoromethane and chloroform were used as the non-reactive, PCE-partitioning, water-partitioning, and PCE and water-partitioning tracers, respectively. N-pentane was used to detect the PCE fraction exposed to the mobile gas. At water saturation of 0.11, only 65% of the PCE was found to be exposed to the mobile gas prior to the removal of PCE, as calculated from the n-pentane retardation factor. More PCE than that detected by n-pentane was depleted from the column due to volatilization through the aqueous phase. However, the ratio of gas-exposed to total PCE decreased on the removal of PCE, implying gas-exposed PCE was preferentially removed by vaporization. These results suggest that the water-insoluble, PCE-partitioning tracer (n-pentane in this study), along with other tracers, can be used to investigate the changes in fluid (including nonaqueous phase liquid) saturation and the removal mechanism during the remediation process.

미고결 퇴적층내 가스하이드레이트 포화도 계산 (Calculation of Gas Hydrate Saturation Within Unconsolidated Sediments)

  • 김길영
    • 지구물리와물리탐사
    • /
    • 제15권2호
    • /
    • pp.102-115
    • /
    • 2012
  • 이 논문은 퇴적물내 포함되어 있는 가스하이드레이트의 포화도를 계산하는 여러 방법에 대하여 토론하고자 한다. 가스하이드레이트의 포화도를 계산하는 방법은 물리검층 자료를 이용하는 방법과 코어자료(압력코어 포함)를 이용하는 방법, 그리고 탄성파 탐사자료로부터 얻을 수 있는 속도 자료를 이용하는 방법 등 크게 세가지 방법으로 나눌 수 있다. 물리검층 자료중 전기비저항 자료를 이용하는 방법의 경우 Archie 식을 주로 이용하는데 이 경우 각각의 변수 값을 정확하게 정의하는 게 중요하다. 또한 가스하이드레이트의 산출형태도 포화도 계산에 큰 영향을 주기 때문에 주의해야 한다. 코어자료를 이용하는 경우 공극수의 염소량을 측정하는 방법과 압력코어를 취득할 경우 이를 이용하는 방법이 있다. 지금까지 발표된 정량적이고 가장 정확한 가스하이드레이트 포화도값을 구할 수 있는 방법이 압력코어를 이용하는 것이다. 그러나 이는 비용과 시간이 많이 소요되기 때문에 연속적인 자료를 얻기가 어렵다는 단점이 있다. 지금까지 발표된 가스하이드레이트 포화도 값을 비교해 보면 전기비저항 값을 이용한 경우가 가장 높은 값을 압력코어를 이용하여 측정한 경우가 가장 낮은 값을 보여주는 경향이 있다. 그러나 이러한 값이 모든 경우에 있어서 절대적인 경향을 보여준다고 볼 수는 없다. 그러므로 가스하이드레이트의 포화도를 정확하게 계산하기 위해서는 여러 가지 방법을 이용하여 계산해야 하며 이를 비교하여 가장 적절한 값을 사용해야 할 것이다.

가스하이드레이트 포화율 및 감압률에 따른 해리특성 분석 (The Analysis of Dissociation Properties According to Gas Hydrate Saturation and Depressurization Rate)

  • 안승희;전보현
    • 한국가스학회지
    • /
    • 제19권3호
    • /
    • pp.54-59
    • /
    • 2015
  • 가스하이드레이트(GH: Gas Hydrate)는 전 세계적으로 약 10조 톤에 이르는 엄청난 양이 대부분 해양의 대륙사면에 부존되어 있으나(동토 지역 : 2 %, 해양 대륙사면 98 %), 현재까지 가스하이드레이트 저류층으로부터 상업화할 수 있을 만큼 가스를 회수하는 기술이 개발되어 있지 않은 실정이다. 일반적으로 회수하는 방법은 감압법, 열자극법, 억제재 주입법 및 치환법 등으로 크게 나누어 볼 수 있으며, 본 연구에서는 가스하이드레이트 포화율과 감압률에 따라서 가스하이드레이트 해리시간 및 가스생산이 어떻게 달라지는 지, 그에 대한 특성을 분석하고자 하였다. 연구분석 결과 감압률과 해리시간의 상관 관계식을 도출($Y=0.0004X^2-0.499X+176.86$)할 수 있었고, 또한 감압률이 클수록 메탄생산량이 좋다는 것을 알 수 있었지만(감압률 40% 대비 50%에서 메탄가스생산량이 46.2% 향상), 감압률이 60%에서는 오히려 생산량이 줄어드는데, 이는 가스하이드레이트 재형성에 기인한 것으로 판단된다.

Characterization of gas-water flow in tight sandstone based on authentic sandstone micro-model

  • Liu, Yuqiao;Lyu, Qiqi;Luo, Shunshe
    • Geosystem Engineering
    • /
    • 제21권6호
    • /
    • pp.318-325
    • /
    • 2018
  • Eight tight sandstone reservoir samples from $He_8$ and $Shan_1$ Formations of the Sulige Gas field were selected to perform gas-water micro-displacement experiment based on authentic sandstone micro-model. The gas pressure-relief experiment was proposed for the first time to simulate the pressure change and gas-water percolation characteristics in the process of gas exploitation. The experiment results show that: (1) In the process of gas accumulation, the gas preferentially flows into the well-connected pores and throats with large radius, but rarely flows into the area without pores and throats. (2) Under sufficient gas drive, the water in pores and throats usually exists in the forms of 'thin water film', 'thick water film', and 'water column', but under insufficient gas drive, gas fails to flow into new pathways in time, so that the reservoirs with large pores and throats are high in water cut. (3) Under the same water saturation, the reservoirs with better petrophysical properties has higher gas recovery factor within unit time. Under the same petrophysical conditions, the reservoirs with lower water saturation show higher gas recovery factor within unit time. The higher the permeability, the stronger the liquid carrying capacity of reservoirs.

Disturbance observer-based robust backstepping load-following control for MHTGRs with actuator saturation and disturbances

  • Hui, Jiuwu;Yuan, Jingqi
    • Nuclear Engineering and Technology
    • /
    • 제53권11호
    • /
    • pp.3685-3693
    • /
    • 2021
  • This paper presents a disturbance observer-based robust backstepping load-following control (DO-RBLFC) scheme for modular high-temperature gas-cooled reactors (MHTGRs) in the presence of actuator saturation and disturbances. Based on reactor kinetics and temperature reactivity feedback, the mathematical model of the MHTGR is first established. After that, a DO is constructed to estimate the unknown compound disturbances including model uncertainties, external disturbances, and unmeasured states. Besides, the actuator saturation is compensated by employing an auxiliary function in this paper. With the help of the DO, a robust load-following controller is developed via the backstepping technique to improve the load-following performance of the MHTGR subject to disturbances. At last, simulation and comparison results verify that the proposed DO-RBLFC scheme offers higher load-following accuracy, better disturbances rejection capability, and lower control rod speed than a PID controller, a conventional backstepping controller, and a disturbance observer-based adaptive sliding mode controller.