• 한국정밀공학회지
• /
• 제29권11호
• /
• pp.1178-1182
• /
• 2012

The organic linings at flue gas desulfurization systems (FGD system) in power plant have the excellent chemical properties but, lose the anticorrosive properties according to the aging with environment conditions. The properties of the organic linings depend on the manufacturing company. Therefore, the basic properties of organic linings for the preestimate of life time should be examined by conducting the aging and the bond strength test according to temperature. The pre-aging samples were compared with the post-aging samples. The temperature conditions of the aging process were 70, 150 and $200^{\circ}C$. The bond strength was calculated and the cross sections of fracture surface were examined by optical microscope and SEM. The $T_g$ was examined by DSC, DTA and TGA.

• 한국세라믹학회지
• /
• 제53권6호
• /
• pp.676-681
• /
• 2016

For the purpose of reducing the amount of limestone, which is used as a desulfurization agent to absorbing $SO_X$ gas in thermal power plants, and to recycle limestone sludge generated from a steel mill, limestone sludge was utilized as a desulfurization agent. In this study, cement, made of flue gas desulfurization (FGD) gypsum obtained in a desulfurization process using limestone sludge, was manufactured then, experiments were conducted to identify the physical properties of the paste and mortar using the cement. The results of the crystal phase and microstructure analyses showed that the hydration product of the manufactured cement was similar to that of ordinary Portland cement. No significant decline of workability or compressive strength was observed for any of the specimens. From the results of the experiment, it was determined that FGD gypsum manufactured from limestone sludge did not influence the physical properties of the cement also, quality change did not occur with the use of limestone sludge in the flue gas desulfurization process.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.79-84
• /
• 2001

The effect of spray characteristics on desulfurization yield was evaluated by performing experiments with pilot spray drying sorber (SDS). Among the variables of operating conditions, the slurry-spraying conditions were chosen as major parameters; Stoichiometric ratio and Sauter mean diameter of slurry droplet were varied for the different gas temperatures and $SO_{2}$ concentrations in the inlet gas flow. From the experimental results, we proposed semi-empirical models of desulfurization yield for both Stoichiometric ratio and Sauter mean diameter of droplets. The optimal condition of spray can be determined based on these results, which might be applied to the design or scale-up of SDS systems.

• 한국분무공학회지
• /
• 제15권4호
• /
• pp.177-181
• /
• 2010

This paper has designed a mixing enhancement apparatus called Lobed-plate and Step-plate and comparatively calculated desulfurization efficiency of when its shape was changed. The parameters used at this time were the shape, SR ratio and the number of nozzles of the mixing enhancement apparatus and comparatively analyzed desulfurization efficiency according to these parameters. As a result, the Step-plate appeared as more highly by around 4% than Lobed-plate in desulfurization efficiency according to the shape of the mixing promotion apparatus, and when the desulfurization efficiency as a SR ratio is considered, it appeared highly by an average of 5% when the SR ratio is 3 rather than 2. As a result of comparing desulfurization efficiency by fixing the SR ratio and setting the number of nozzles as 4 pieces and 6 pieces, there was no big change in desulfurization efficiency when the SR ratio is 2, but it could be confirmed to improve by around 5% when the SR ratio is 3 when time passed 8 seconds.

• 한국세라믹학회지
• /
• 제51권6호
• /
• pp.575-583
• /
• 2014

The flue gas desulfurization (FGD) process is currently the most effective process utilized to remove sulfur dioxide from stack gases of coal-fired plants. However, FGD systems use a lot of limestone as desulfurizing agent. In this study, we use limestone sludge, which is a by-product of the steel industry, to replace the desulfurizing agent of the FGD system. The limestone particle size is found to be unrelated to the desulfurizing rate; the gypsum purity, however, is related. Limestone sludge mixes with limestone slurry delivered at a constant rate in a desulfurizing agent with organic acid are expected to lead to a high desulfurization efficiency and high quality by-product (gypsum).

• 자원리싸이클링
• /
• 제24권6호
• /
• pp.17-23
• /
• 2015

배연탈황 기술은 화력발전소의 연소가스에서 발생하는 $SO_2$를 제거하는 기술이다. 발전소에서는 주로 석회석을 이용한 습식 배연탈황공정을 적용하고 있으나, 천연자원인 석회석의 고갈 및 높은 운전동력 소비 등의 문제로 석회석을 대체할 수 있는 흡수제 개발에 매진하고 있다. 따라서 본 연구에서는 제철소에서 발생하는 석회석 슬러지를 흡수제로 적용하기 위해 석회석 슬러지의 입도분포에 따른 탈황성능을 검토하고자 하였다. 탈황효율 검토방법으로는 입도에 따른 석회석 슬러지의 물리 화학적 특성 검토 및 $SO_2$가스제거시험 등을 시행하였다.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 추계학술대회 논문집
• /
• pp.443-444
• /
• 2003

The developments on desulfurization have been focused on the application to the advanced power generation systems such as integrated gasification-combined cycle (lGCC) and the gasification-molten carbonate fuel ceil (MCFC). The gas produced from the coal gasification contains H$_2$S and other hazardous sulfur compounds, which must be removed to avoid corrosion and environmental problems. (omitted)

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2001년도 춘계학술발표강연 및 논문개요집
• /
• pp.63-63
• /
• 2001

• 대한기계학회논문집B
• /
• 제34권8호
• /
• pp.775-782
• /
• 2010

본 연구는 대형 석탄 화력 발전소 탈황설비 내 흡수탑의 성능향상을 위하여 Tray 설치 가능성을 검토하기 위한 연구로 전산 유체역학(CFD) 기법을 이용하여 탈황설비 내 흡수탑의 내부유동을 전산해석 하였다. 흡수탑 내의 Gas와 Slurry의 거동에 대한 사실적 묘사를 위해 Euler-Lagrangian 기법을 이용한 전산해석을 수행하였다. 기존 흡수탑 내에 Tray를 설치함에 따라 탈황설비 내에서 Slurry의 체공시간 증가로 인한 펌프동력 절감과 압력강하 증가로 인한 Fan의 소요동력 증가에 대하여 중점적으로 비교 및 고찰하였다. 그 결과 Tray를 설치함에 따라 흡수탑 내에 Slurry의 체공시간과 배기가스의 압력강하가 증가되는 것을 확인할 수 있었다. 체공시간 증가로 인하여 절약된 동력이 압력강하에 의한 동력 소모량 증가보다 더 큰 것으로 확인되었다.

• Korean Chemical Engineering Research
• /
• 제48권1호
• /
• pp.116-120
• /
• 2010

CCS($CO_2$ capture & storage) 기술의 하나인 순산소 석탄화력발전 시스템에서 시스템의 안정한 운전을 위하여 연소가스 재순환이 적용되게 된다. 연소가스 재순환시 황산화물 및 분진의 농축이 발생되게 되며 일반적인 화력발전 시스템에서 탈황 및 집진과는 다른 형태의 운전조건을 나타내게 되므로 상용 석탄화력 발전소에 적용하기에 앞서 관련 연구가 필요하다. 본 연구에서는 이와 같은 순산소 석탄 연소 시스템에서 황산화물 및 분진의 효과적인 제거를 위하여 석회석을 이용한 로내탈황 및 고온 전기집진에 관한 기초적인 연구를 수행하였다. 석회석을 이용한 로내탈황에서 ash에 의한 탈황효과를 포함하여 60%의 탈황효율을 나타내었고 전기집진의 경우에는 $CO_2$ 비율이 높을수록 분진입자의 크기가 클수록 코로나 전류량의 감소로 인하여 집진효율이 저하하는 것으로 나타났다.