• 한국세라믹학회지
• /
• 제43권7호
• /
• pp.445-450
• /
• 2006

The preparation of AlN powder by SHS in the system of $Al-AlN-NH_4Cl$ was investigated in this study. In the preparation of AlN powder, the effect of gas pressure and the composition such as Al, AlF, and additive in mixture on the reactivity were investigated. At 60 atm of the initial inert gas pressure in reactor, the optimum composition for the preparation of pure AlN was 35 wt%Al+5 wt% $NH_4Cl+60wt%$AlN. The AlN powder synthesized in this condition was a single phase AlN with a whisker morphology.

• 한국연초학회지
• /
• 제22권2호
• /
• pp.114-122
• /
• 2000

This study was carried out to investigate the changes in the composition of essential oils for the improvement of air-curing process of burley tobacco leaves. From the essential oils isolated from the cured tobacco leaves by steam distillation method, 90 compounds including 15 acids and esters, 19 alcohols, 23 aldehydes and ketones, 19 hydrocarbons, and 14 miscellaneous compounds, could be identified by gas chromatography and gas chromatography-mass spectrometry. Among them, acids and esters were gradually decreased during the progress of curing after harvesting. A rapid increase in alcohol content was observed in the earlier stage of curing, but thereafter, decrease followed until the end of curing However, aldehyde and ketone groups were continuously increased during curing and were 3 times higher in quantity after curing than at the harvesting time. The concentration of hydrocarbons was increased in the earlier stage of curing, but gradually decreased from the middle stage. The miscellaneous compounds were continuously increased in content until the end stage of curing, with rapid increased in the earlier stage of curing.

• 대한임상검사과학회지
• /
• 제37권3호
• /
• pp.164-167
• /
• 2005

Cellular fatty acid composition of 17 strains of the Pseudomonas aeruginosa was determined by gas-liquid chromatography isolated from environmental and clinical sample in a C university hospital. Straight-chain saturated acid of C16:0 and straight-chain unsaturated acid of C18:1 with a double bond were commonly found in all the strains tested. The presence of 12:0 3OH (3-10%), 16:0 (18-28%), and 18:1w7c (17-37%) showed the characteristics of the species in the Pseudomonas. Bacterial fatty acid composition was considered to be useful for the study of interrelation and for rapid identification of the bacteria.

• Elastomers and Composites
• /
• 제57권4호
• /
• pp.188-196
• /
• 2022

Styrene-butadiene rubber(SBR) is a copolymer of styrene and butadiene. It is composed of 1,2-unit, 1,4-unit, and styrene, and its properties are dependent on its microstructure. In general, rubber composites contain a single rubber or a blended rubber. Similarly, SBR is used by mixing with natural rubber(NR) and butadiene rubber(BR). The composition of a rubber article affects its physical and chemical properties. Herein, an analytical method for determining the microstructure of SBR using via pyrolysis is introduced. Pyrolysis-gas chromatography/mass spectrometry is widely used to analyze the microstructure of polymeric materials. The microstructure of SBR can be determined by analyzing the principal pyrolysis products formed from SBR, such as 4-vinylcyclohexene, styrene, 2-phenylpropene, 3-phenylcyclopentene, and 4-phenylcyclohexene. An analytical method for determining the composition of SBR/NR, SBR/BR, and SBR/NR/BR blends via pyrolysis is introduced. The composition of blended rubber can be determined by analyzing the principal pyrolysis products formed from each rubber component.

• 대한화학회지
• /
• 제46권6호
• /
• pp.523-527
• /
• 2002

LPG에서 황화합물의 분배계수에 미치는 영향에 관하여 연구하였다. 분석 대상 물질은 알칸계통에 사슬형머캡탄이었다. LPG의 액체상 및 기체상의 조성을 기체크로마토그래피로 분석하였다. SAS를 사용한 다중회귀분석방법(MLR)으로 황화합물의 끓는점(Bp), 온도(Tk), 용매의 조성(C4)과 관련되 분배계수를 다음과 같이 구할 수 있었다. Kpc=0.61222(${\pm}$0.000959)Bp+0.26984(${\pm}$0.06504)C40.003803(${\pm}$0.0019993)Tk, N=24, F=14.851, $R^2_{adj}$=0.6437. 분배계수에 미치는 중요 인자는 황화합물의 대기압에서 끓는점과 LPG의 조성이었다. n-부탄의 높은 조성 및 높은 온도에는 분배계수가 증가하여 가스의 취기 상승효과가 클 것으로 추측된다.

• 한국연소학회지
• /
• 제16권4호
• /
• pp.38-45
• /
• 2011

Coal-derived syngas has been utilized by main fuel at IGCC power plant. Research efforts for investigating the characteristics of premixed and nonpremixed flames at gas-turbine condition have been conducted. The present study has been mainly motivated to evaluate the capability of the detailed chemical kinetics to predict the syngas laminar flame speed. Special emphasis is given to the effects of pressure, temperature, syngas composition, and dilution level on the characteristics of premixed and nonpremixed flames. The predicative capability of a number of detailed mechanism for laminar flame speed is compared to experimental data. From these results, detailed kinetics of Davis et al. and Li et al. have the best conformity with the experiments in the all the case of parametric studies.

• Fibers and Polymers
• /
• 제5권1호
• /
• pp.52-58
• /
• 2004

Previous investigation results revealed that after the Low Temperature Plasma (LTP) treatment, the hydrophilicity of wool fiber was improved significantly. Such improvement enhances the wool dyeing and finishing processes which might be due to the changes of the wool surface to a more reactive one. In this paper, wool fibers were treated with LTP with different gases, namely, oxygen, nitrogen and gas mixture (25 % hydrogen/75 % nitrogen). Investigations showed that chemical composition of wool fiber surface varied differently with the different plasma gas used. The surface chemical composition of the different LTP-treated wool fibers was evaluated with different characterization methods, namely FTIR-ATR, XPS and saturated adsorption value. The experimental results were thoroughly discussed.

• 대한전기학회논문지
• /
• 제41권5호
• /
• pp.483-491
• /
• 1992

Plasma silicon oxynitride film has been applied as a final passivation layer for semiconductor devices, because it has high resistance to humidity and prevents from alkali ion's penetration, and has low film stress. Structure properties of plasma silicon oxynitride film have been studied experimentally by the use of FT-IR, AES, stress gauge and ellipsometry. In this experiment,Si-N bonds increase as NS12TO/(NS12TO+NHS13T) gas ratio increases. Peaks of Si-N bond, Si-H bond and N-H bond were shifted to high wavenumber according to NS12TO/(NS12TO+NHS13T) gas ratio increase. Absorption peaks of Si-H bond were decreased by furnace anneal at 90$0^{\circ}C$. The atomic composition of film represents that oxygen atoms increase as NS12TO/(NS12TO+NHS13T) gas ratio increases, to the contrary, nitrogen atoms decrease.

• 오토저널
• /
• 제5권4호
• /
• pp.47-61
• /
• 1983

In this paper the simulation of a thermodynamic power cycle for a 4-stroke, single-cylinder, spark-ignition engine was studied. In this simulation the cylinder volume was restricted to two zones, a burnt and an unburnt zone, and the convective heat transfer from cylinder contents to surroundings was considered. The chemical species in burnt gas considered was 12 species including H$_{2}$O, H$_{2}$, OH, H, N$_{2}$, NO, N, CO$_{2}$, CO, $O_{2}$, O and Ar. Using this model, computer program for compression, ignition and expansion processes was composed and pressure, temperature and composition of cylinder gas at each crank angle were computed. The composition of CO$_{2}$, CO, $O_{2}$ in the burnt gas when exhaust valve opens, the maximum temperature, the maximum flame speed and the combustion duration were also computed as a function of equivalence ratio. The relation between burnt mass fraction and burnt volume fraction was also computed.

• 한국가스학회지
• /
• 제21권6호
• /
• pp.1-7
• /
• 2017

본 연구는 천연가스를 기반으로 하는 가스연료 자동차의 연비산출방법에 대해 미국과 유럽의 기준을 조사하고 적합성을 분석하여 국내에 적합한 자동차 연비 산출방법을 도출하는데 목적이 있다. 탄소평형법으로 유도되는 연료소비율 산출은 연료의 탄소중량비와 자동차 배출가스중 탄소성분의 평형 관계식에 의해 유도된다. 미국기준은 시험가스 조성의 제한이 없지만 유럽 기준은 기준 시험가스(G20, G23)를 사용하여야 한다. 국내 도시가스를 사용하는 NGV의 경우 유럽기준을 적용하면 시험가스의 차이로 연비가 약 12% 불리하게 나오는 것으로 확인되었다. 또한, 연비 산출시 필요한 연료물성을 발열량으로부터 결정하는 방법을 소개하고 이러한 방법을 기반으로 국내 천연가스 자동차 연비 산출방법을 제시하였다.