• Progress in Superconductivity and Cryogenics
• /
• v.8 no.1
• /
• pp.59-64
• /
• 2006

A closed-loop cryogenic cooling system for high field magnets is presented. This design is motivated by our recent development of cooling system for 21 tesla Fourier Transform ion Cyclotron Resonance (FT-ICR) superconducting magnets without any replenishment of cryogen. The low temperature superconducting magnets are immersed in a subcooled 1.8 K bath, which is connected hydraulically to the 4.2 K reservoir through a narrow channel. Saturated liquid helium is cooled by Joule-Thomson heat exchanger and flows through the JT valve, isenthalpically dropping its pressure to approximately 1 6 kPa, corresponding saturation temperature of 1.8 K. Helium gas exhausted from pump is now recondensed by two-stage cryocooler located after vapor purify system. The amount of cryogenic Heat loads and required mass flow rate through closed-loop are estimated by a relevant heat transfer analysis, from which dimensions of JT heat exchanger and He II heat exchanger are determined. The detailed design of cryocooler heat exchanger for helium recondensing is performed. The effect of cryogenic loads, especially superfluid heat leak through the gap of weight load relief valve, on the dimensions of cryogenic system is also investigated.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.4
• /
• pp.30-33
• /
• 2006

Several crucial issues are discussed in the design of cryogenic cooling system for high field magnets. This study is mainly motivated by our ongoing program to develop a 21 T Fourier Transform Ion Cyclotron Resonance Mass Spectrometer (FT-ICR MS). The magnets of this system will be built horizontally to accomplish the requirement of user friendliness and reliability, and the replenishment of cryogen will not be necessary by a closed-loop cooling concept. The initial cool-down and safety are basically considered in this paper. The effects of the helium II volume and the gap distance of the weight load relief valve (or safety valve) on the cool-down time and temperature rising during an off-normal state are discussed. The total amount of cryogenic cooling loads and the required helium flow rate during cool-down are also estimated by a relevant heat transfer analysis. The temperatures of cryogen-free radiation shield are finally determined from the refrigeration power of a cryocooler and the total cryogenic loads.

• Steel and Composite Structures
• /
• v.52 no.1
• /
• pp.89-107
• /
• 2024

This article focuses on the static and dynamic analysis and optimization of an anisogrid lattice plate subjected to axial compressive load with simply supported boundary conditions. The lattice plate includes diagonal and transverse ribs and is modeled as an orthotropic plate with effective stiffness properties. The study employs the first-order shear deformation theory and the Ritz method with a Legendre approximation function. In the realm of optimization, the Non-dominated Sorting Genetic Algorithm-II is utilized as an evolutionary multi-objective algorithm to optimize. The research findings are validated through finite element analysis. Notably, this study addresses the less-explored areas of optimizing the geometric parameters of the plate by maximizing the buckling load and natural frequency while minimizing mass. Furthermore, this study attempts to fill the gap related to the analysis of the post-buckling behavior of lattice plates, which has been conspicuously overlooked in previous research. This has been accomplished by conducting nonlinear analyses and scrutinizing post-buckling diagrams of this type of lattice structure. The efficacy of the continuous methods for analyzing the natural frequency, buckling, and post-buckling of these lattice plates demonstrates that while a degree of accuracy is compromised, it provides a significant amount of computational efficiency.

• Korean Journal of Agricultural Science
• /
• v.50 no.3
• /
• pp.499-510
• /
• 2023

The purpose of this study is to develop a high-speed combine harvester. The performance was evaluated by composing a dynamic simulation model of a threshing cylinder and analyzing the amount of threshed rice grain during threshing operations. The rotational speed of the threshing cylinder was set at 10 rpm intervals from 500 rpm until 540 rpm, based on the rated rotational speed of 507 rpm. The rice stem model was developed using the EDEM software using measured rice stem properties. Multibody dynamics software was utilized to model the threshing cylinder and tank comprising five sections below the threshing cylinder, and the threshing performance was evaluated by weighing the grain collected in the threshing tank during threshing simulations. The simulation results showed that section 1 and 2 threshed more grains compared to section 3 and 4. It was also found that when the threshing speed was higher, the larger number of grains were threshed. Only simulation was conducted in this study. Therefore, the validation of the simulation model is required. A comparative analysis to validate the simulation model by field experiment will be conducted in the future.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.4 no.1
• /
• pp.128-137
• /
• 2002

This study was conducted to develop the heat exchanger by utilizing the heat energy of underground water(15℃), which might be used for cooling and heating system of the agricultural facilities. We developed the heat exchanger by using the parallel type plat fin tube made of Aluminum(Al 6063), which was named Aloo-Heat(No. 0247164, offered by Korean Intellectual property Office). The trial manufactures were made from Aloo-heat which was 600mm, 700mm length respectively, and It were welded to the end "U" type in order to direct flow of the underground water. The performance test was carried out under the condition of open space and room temperature with the change of flow rate of the underground water and air. The results are as follows. 1. The trial manufactures had convection heat value from 33 to 156 W/m²℃, and It was coincided with design assumption. 2. The amount of energy transfer was increased with the increment of the area of heat transfer, the air flow, the gap of temperature inlet & outlet the underground water and the air. 3. The heat value was 6,825W when the air flow was 6,000m³/h and the gap of temperature between inlet and outlet of the underground water was 6℃, and It dropped from 25.8℃ to 23.2℃(-2.6℃ difference). The convection heat value was 88.5W/m²℃. 4. The heat value was 2.625W when the air flow was 4,000m³/h and the gap of temperature between inlet and outlet the underground water was 2℃, and It dropped from 27℃ to 22.5℃(-4.5℃ difference). The convection heat value was 33.6W/m²℃. 5. Correlation values(R²) of the testing heat values of the trial manufacture type I, II, and III were 0.9141, 0.8935, and 0.9323 respectively, and correlation values(R²) of the amount of the air flow 6,000m³/h, 5,000m³/h, 4,000m³/h were 0.9513, 0.9414, and 0.9003 respectively.

• Journal of Preventive Medicine and Public Health
• /
• v.31 no.4 s.63
• /
• pp.708-718
• /
• 1998

To investigate the effect of smoking and drinking habit on the health status in lead using industries, 2,785 male workers in lead using industries (7 storage battery industries, 7 secondary smelting and related industries, and 4 primary metal and other manufacturing industries) were selected for this study. This study was carried out as a part of periodic health examination. Selected study variables were zinc protoporphyrin in whole blood (ZPP), SGOT and SGPT for laboratory test. Questionnaire for lead related symptoms and smoking and drinking habit was provided to all the workers and filled up by themselves and reconfirmed by physician. The results obtained were as follows; 1. The overall smoking and drinking rate of study population were 69.8% and 73.6%, respectively. While the smoking and drinking rate of storage battery workers were 68.8% and 72.3%, those of secondary smelting industries and other industries were 66.0% & 66.4% and 74.6 & 80.3% respectively. 2. While the mean values of blood ZPP of lead exposed workers were significantly higher than other group, those of SGOT of storage battery workers were significant higher than other worker. But there were no differences of mean values of other variables. 3. Smoking habit did not affect on the mean value of blood ZPP of workers in special health examination group, but there were significant differences of blood ZPP and SGOT between drinker and non-drinker. 4. Symptom prevalence of lead exposure were higher in drinking and smoking group than non-drinking and non-smoking group. 5. In multiple regression analysis of the total lead related symptoms, blood ZPP, SGOT, and SGPT as dependent variable, respectively, and age, work duration, blood ZPP, pack year and amount of alcohol drinking as independent variables, work duration, pack year, amount of alcohol drinking, age contributed to total symptoms; and age, work duration, pack year contributed to blood ZPP; and age, amount of alcohol drinking, work duration contributed to SGOT; and pack year contributed to SGPT.

• Korean Journal of Soil Science and Fertilizer
• /
• v.9 no.3
• /
• pp.183-199
• /
• 1976

1. The cultivated land in Korea has originally low fertility resulting in high dependence to fertilizers. 2. The total fertilizer requirement calculated by the Office of Rural Development (ORD) in 1976 was about 1,153 thousand mts, and the total amount of supply planned by the Ministry of Agriculture and Fishery was 1,010 thoushand mts which is close to the amount calculated by ORD. However, there is some gap between the amount of recommended (N, 11.6; $P_2O_5$: $K_2O$, 7.3kg/10a> and supply planned (N, 12.0; $P_2O_5$, 6.3; $K_2O$. 4.8kg/10a) fertilizers for each elements per unit area 3. For 15 years from 1960 to 1975 the fertilizer consumption of nitrogen was roughly increased from 200,000 mts to 500,000 mts; phosphorus, from 50,000 to 250,000 mts; potassium, from 10, 000 to 170,000 mts; accounting 2.5, 5, and 17 times of increase respectively. 4. The total fertilizer consumption for 5 years from 1967 to 1971 was about 100,000 mts and another 5years from 1971 to 1975 was 300,000 mts indicating three times increase. 5. The direct factors influenced to the increase of fertilizer consumption in recent years are 1) the dissemination of high yielding Tongil type rice varieties which are resistant to heavy fertilization 2) high price policy for agricaltural products 3) increased cultivation of vegetables:, fruits, and forages which require high level of fertilizers. The indirect factors are 1) dissemination of new improved agricultural techniques, 2, improvement of cultivated land conditions through irrigation system and land reform, 3) increased supply of silicate fertilizers, and 4) increase of farm income. 6. The percentage of total fertilizer consumption by rice (32%) and barley (25%) is about 57%. The ratio of total fertilizer consumption by vegetables and forages is expected to increase greatly. 7. Based on the increasing tendency of cultivated land and yield per unit area for last 10 years in each crop, total fertilizer consumptions in 1980, 1990, and 2000 year are estimated to 1,290,000, 1,580,000 and 1,870,000 mts respectively.

• Korean Journal of Materials Research
• /
• v.12 no.8
• /
• pp.624-633
• /
• 2002

In order to improve the hydrogen storage capacity and the activation properties of the hydrogen storage alloys, the rare-earth metal alloy series, MmN $i_{4.5}$M $n_{0.5}$Z $r_{x}$(x=0, 0.025, 0.05, 0.1), are prepared by adding excess Zr in MmN $i_{4.5}$M $n_{0.5}$ alloy. The various parts in hydrogen storage vessel consisted of copper pipes reached the setting temperature within 4~5 minutes after heat addition, which indicated that storage vessel had a good heat conductivity required in application. The performance test on storage vessel filled with rare-earth metal alloys of 1000 gr was also conducted after hydrogen charging for 10 min at $18^{\circ}C$ under 10 atm. It showed that the average capacity of discharged hydrogen volume was found to be for $MmNi_{4.5}$ $Mn_{0.5}$ and $MmNi_{4.5}$ $Mn_{x}$ 0.5/$Zr_{samples}$ indicated that the released amount of hydrogen for this $AB_{5}$ type alloys was more than 92 % of theoretic value, and also it was found that the optimum discharging temperature for obtaining an appropriate pressure of 3 atm was determined to be $V^{\circ}C$ for $MmNi_{4.5}$ $Mn_{0.5}$$Zr_{x}$(x=0, 0.025, 0.05, 0.1) hydrogen storage alloys. The released amount of these hydrogen storage samples was 125 $\ell$ , 122.4 $\ell$ and 108.15 $\ell$/kg for $MmNi_{4.5}$ $Mn_{0.5}$ $Zr_{0.025}$ $MmNi_{4.5}$M $n_{0.5}$Z $r_{0.05}$, and MmN $i_{4.5}$ Mn_0.5$Zr_{0}$, at $70^{\circ}C$ respectively. Amount of the 2nd phases increase with increase on Zr contents in $MmNi_{4.5}$$Mn_{0.5}$ $Zr_{ 0.1}$/ alloy. This phenomenon indicates that$ ZrNi_3$ in $MmNi_{4.5}$ $Mn_{0.5}$ $Zr_{x}$ / phase, which shows the maximum storage capacity and the strong resistance to intrinsic degradation, is considered as a proper alloy for hydrogen storage. As the Zr contents increase, the activation time and the plateau pressure decreases and sloping of the plateau pressure increases.creases.eases.s.

• Korean Journal of Health Education and Promotion
• /
• v.16 no.2
• /
• pp.157-171
• /
• 1999

This paper analyzed health practices of students in an university in Chollabukdo Province. It attempted to study how many university students had what kinds of health practices. Furthermore, it tried to find out what are the major problems in health practice among university students. To study health practices of university students, this study sampled 1,469 students randomly. Many of the students had poor practices of teeth care. In tooth-brushing, many students (35.8%) brushed their teeth before breakfast in the morning. Most of the students (95% or more) visit dental clinic only when they had problem(s) in their teeth. For weights, there exists a great gap between perception and BMI (Body Mass Index), especially among female students. Among the female students who perceived their weights were above average, 96.4% of them were normal according to BMI. Many of the students were drinking greater amount of alcohol than safe amount suggested by the National Health and Medical Research Council of Australia. The proportion of the students drinking harmful or hazardous amount of alcohol were 79.5% of the male students and 74.9% of the female students. It suggests that health promotion fund or tax need to be levied on alcohol to frustrate unhealthful drinking. More than half (59.0%) of the male students and about 6.0% of the female students were smoking cigarettes. The smoking initiation ages were 17.8 for male and 18.2 for female students. It means that many of the students started smoking in their junior high or high schools. It implies that smoking prevention and smoking cessation programs need to be emphasized in these schools. For perception on sex, 27.8% of the male students and 60.9% of the female students thought to keep their virginity before their marriage. The female students were more conservative in perception on sex. The average number of sexual intercourses per year of male students was 17.0 times with their lovers, 7.9 times with prostitutes, and 7.0 times with maids. The female students had sexual intercourses 5.0 times with their lovers and 4.0 times with waiters per year. The proportion of students who had experience of sexual intercourse with homosexual partners was 1.0%. The finding this study was that the university students were vulnerable to poor health practices. It is suggested that public health intervention program be provided for university students to keep them in good healthy lifestyle.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.99-104
• /
• 2009

For recycling of waste foundry sands, researchers recently try to recycle them rather than depend on reclamation, and are studying on how to combine waste foundry sands with cement and use them for various kinds of construction material as the effective recycling method of waste foundry sand. In this research, The ways to find the proper replacement rate of waste foundry sands and to make use of them were suggested through the experiments on the range to apply waste foundry sands with two levels of 1:3 mixture rate of W/C 43% and 50%. The research result showed that in terms of liquidity as the characteristic of unhardened mortar, as the replacement rate of waste foundry sands increased, its flow tended to decrease. The amount of air also displayed a similar tendency to that of liquidity in that the higher the replacement rate of waste foundry sands became, the lower it became. With regard to the solidity trait of hardened mortar, it increased when the waste foundry sands were replaced more, and the replacement of waste foundry sands caused increased initial solidity. As for the amount of water permeated and that of water absorbed as the water tight proofing properties, the amount of permeated water was proved to decrease because of the gap recharge effect by the fine powder of waste foundry sands, and the replacement of waste foundry sands in the structures requiring watertightness is concluded to be very effective.