• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.3 s.118
• /
• pp.298-304
• /
• 2007

In this paper, the antenna which has a multiband operation (GSM850, EGSM, DCS1800, USPCS, W-CDMA) is proposed. This antenna was designed by the commercial software HFSS 3-D EM simulator, and it is organized by using a meander branch structure which has a via and lines on FR-4$(\varepsilon_r=4.4)$ substrate. Especially, it has a gap feeding structure which makes good operation at overall bandwidth. The designed antenna is manufactured by PCB processing, and measured by using a network analyzer and a test chamber. The manufactured antenna with the dimension of 8 mm width, 20 mm height and 3.2 mm thickness is able to applied as an internal antenna for multiband mobile phones.

• Journal of electromagnetic engineering and science
• /
• v.15 no.2
• /
• pp.111-114
• /
• 2015

In this paper, we have proposed dual-band Phi-shaped slot gap filler antenna for satellite internet service applications. Some properties of the antenna such as return loss, radiation pattern, and gain have been simulated and measured. The proposed antenna has a Phi-shaped slot on the circular patch and is fabricated on the TLX-9 substrate. The radius of the circular patch is 25 mm, and it has a coaxial feeding structure. The dual-band Phi-shaped slot gap filler antenna has high-gain, small-size, simple-structure, and good radiation patterns at each band. The operating frequency band can be tuned by adjusting the length AL and FL of the Phi-shaped slot.

• Journal of Welding and Joining
• /
• v.24 no.5
• /
• pp.49-56
• /
• 2006

For laser welding in shipbuilding industry, gap bridging capability is one of the most important characteristics to achieve the high productivity and good weld quality. Recently, laser-GMA hybrid welding process is regarded as a distinctive method to overcome the tight gap tolerance with improving the productivity. In this study, the influence of process parameters on the bead formation was experimentally analyzed and the relationship between the process parameters and geometric imperfections was investigated. It was revealed that undercut, excessive weld metal, excessive penetration and incompletely filled groove were the major geometric imperfections. The optimized wire feeding and arc pressure were necessary to ensure the gap bridging ability. The approach to select the process parameters was conducted for butt welding with up to 2mm joint gap, in which the sound weld beads were generated without changing the welding speed.

• Journal of information and communication convergence engineering
• /
• v.16 no.3
• /
• pp.197-202
• /
• 2018

This paper reveals the impact of the insertion of electromagnetic band gap (EBG) structures on the performance of circularly polarized (CP) patch-slot antenna with offset slot. Several optimizations are necessary to precise physical parameters in the aim to fix the resonance frequency at 3.2 GHz. The proposed antenna possesses lightweight, simplicity, low cost, and circular polarization ensured by two feeding sources to permit right-hand and left-hand circular polarization process (RHCP and LHCP). The measured results compared with simulation results of the proposed circularly polarized EBG antenna with offset slot show good band operations with –10 dB impedance bandwidths of 9.1% and 36.2% centered at 3.2 GHz, which cover weather radar, surface ship radar, and some communications satellites bands. Our investigation will confirm the simulation and experimental results of the EBG antenna involving new EBG structures.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.3
• /
• pp.251-258
• /
• 2011

To investigate whether the rearing environmental factors (size heterogeneity, rearing density, and feeding frequency) affect the growth and cannibalism of fry in cultured puffer Takifugu obscurus, we conducted three experiments. To examine size effects, we used small (total length [TL] $26.0{\pm}0.5\;mm$, body weight [BW] $0.18{\pm}0.01\;g$), medium (TL $23.1{\pm}0.1\;mm$, BW $0.28{\pm}0.01\;g$), large (TL $26.0{\pm}0.2\;mm$, BW $0.48{\pm}0.01\;g$) and small-large size combination groups. For density, we used size-matched puffers (TL $25.0{\pm}0.5\;mm$, BW $0.53{\pm}0.03\;g$) and five density were examined ranging from 1.43 to 7.14 individuals/L. For the feeding frequency, we also used size-matched fry and feeding frequencies of three times/2 days, one time/day, two times/day, three times/day. We ran each experiment in triplicate and investigated the survival rate, daily food intake (DFI), feed efficiency (FE), and daily growth rate (DGR). The growth of the puffers increased with increasing size, density, and feeding frequency, while cannibalism increased with a greater size gap, density and lower feeding frequency. Therefore, we concluded that size, rearing density, and feeding frequency are major factors influencing growth and cannibalism of the puffer, T. obscurus.

• The Journal of Korean Academy of Sensory Integration
• /
• v.21 no.3
• /
• pp.79-102
• /
• 2023

Objective : Autistic Spectrum Disorders(ASD) is a developmental disorder characterized by atypical sensory adaptation, communication problem, stereotyped behavior, and feeding disorders. The reasons for ASD feeding disorders are oral sensory motor, cognitive, behavioral, and social problems. Major symptoms include picky eating, selective eating, food refusal, food neophobia, limited food variety, and food aversion. ASD feeding disorders could be accompanied by various problems such as health and nutrition intake problems, feeding development, eating-related sociability, and family and caregiver stress. Feeding problems and disorders in ASD can present from birth. However, ASD is diagnosed by the age of 3, and there might be an appropriate treatment gap. Usually, symptoms of feeding disorders tend to decrease with age. However, the symptoms often remain, so early evaluation, intervention, and periodic checking are necessary. In this study, the general information about the feeding disorder characteristics of ASD, influencing factors, and intervention were described through a literature review. Conclusion : Sensory-based therapy and behavior-based therapies are generally used for feeding disorders in ASD. Sensory-based therapy is effective for food sensitivity and behavior-based therapy for food selection. As the symptoms of feeding disorders in ASD are diverse, a comprehensive approach includes play and participation, oral motor exercise, diet, and daily life. However, appropriate evaluation, intervention protocol, and guidelines for the treatment of feeding disorders in ASD are limited. Therefore, a complex approach based on a more systematic understanding is needed. Feeding rehabilitation specialists, such as occupational therapists, should provide appropriate evaluation and intervention.

• Neonatal Medicine
• /
• v.25 no.4
• /
• pp.186-190
• /
• 2018

Esophageal atresia (EA) with proximal tracheoesophageal fistula (TEF; gross type B) is a rare defect. Although most patients have long-gap EA, there are still no established surgical guidelines. A premature male infant with symmetric intrauterine growth retardation (birth weight, 1,616 g) was born at 35 weeks and 5 days of gestation. The initial diagnosis was pure EA (gross type A) based on failure to pass an orogastric tube and the absence of stomach gas. A "feed and grow" approach was implemented, with gastrostomy performed on postnatal day 2. A fistula was detected during bronchoscopy for recurrent pneumonia; thus, we confirmed type B EA and performed TEF excision and cervical end esophagostomy. As the infant's stomach volume was insufficient for bolus feeding after reaching a body weight of 2.5 kg, continuous tube feeding was provided through a gastrojejunal tube. On the basis of these findings, esophageal reconstruction with gastric pull-up was performed on postnatal day 141 (infant weight, 4.7 kg), and he was discharged 21 days postoperatively. At 12 months after birth, there was no catch-up growth; however, he is currently receiving a baby food diet without any complications. In patients with EA, bronchoscopy is useful for confirming TEF, whereas for those with long-gap EA with a small stomach volume, esophageal reconstruction with gastric pull-up after continuous feeding through a gastrojejunal tube is worth considering.

• Fibers and Polymers
• /
• v.4 no.2
• /
• pp.71-76
• /
• 2003

We evaluated the seam characteristics with finishing, seaming and sealing processes and seam Puckering behavior of the breathable waterproof fabrics with laser scan. There were differences in 99% significant level between the seamed fabric and the sealed fabric. Seam breakage was initiated with the breakage of sewing thread, so the seam strength after seaming was almost uniform. The sewn seam strength and elongation increased with sealing process in all finishing methods. Pucker grade of laminating type was generally much higher than that of the coating type. We confirmed that wave length and amplitude have more important meaning than the number of weave in the breathable waterproof fabrics. The puckering in breathable waterproof fabrics is mainly occurred by inherent and feeding pucker. The former if due to the insertion of sewing thread and the littler is caused by differential feeding when two pieces of fabric are fed into the gap between a press foot and needle plate.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.121.4-121
• /
• 2001

We propose an off-line methodology for detecting a faulty backup roll that generates eccentricity components, under the condition that the feeding velocity, equivalently the angular velocity of roll, is not constant. From a newly devised speed angle conversion algorithm, we transform all process data into those of a virtual process under a constant feeding speed. This indirectly way, we can apply a spectral analysis to the original process. In addition, we develop an online detection method of roll eccentricity based on newly designed PLG sensor. This PLG sensor is robust because of applying magnetic proximity sensnors and non-contact measurement method.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.293-296
• /
• 2002

In this paper, we proposed a beam tilting microstrip patch array antenna for the reception of satellite signals by using low cost copper etched polyester films and foams. The configuration and coupling mechanism of the proposed antenna are similar to the dipole Yagi-Uda antenna. It is composed of 3 layers of polyester films and three layers of foam. In order to prevent unwanted radiation and coupling loss by microstrip feeding networks and parasitic patches, a stacked layer with rectangular slots above the driver patch array is inserted. The 16${\times}$8 element microstrip Patch way antenna is Presented by experimental results. Its beam patterns are affected by many parameters such as sizes of the patches, gap between the patches. characteristics of the substrates, feeding method, etc. Owing to its complexities of various design parameters, both simulation and experiment were performed. The fabricated antenna received DBS signal from KOREASAT 3 by doing nothing but adjusting azimuth direction.