• International Journal of Automotive Technology
• /
• 제6권4호
• /
• pp.323-332
• /
• 2005

A cylindrical constant volume combustion chamber was used to investigate the flow characteristics at the spark electrode gap and the combustion characteristics of a homogeneous charged methane-air mixture under various overall charge pressures, excess air ratios and ignition times. The flow characteristics, including the mean velocity and turbulence intensity, were analyzed with a hot wire anemometer. Combustion pressure development measured by piezoelectric pressure transducer, a flame propagation image acquired by ICCD camera and exhaust emissions measured by 2-valve gas chromatography were used to investigate effects of initial pressures, excess air ratios and ignition times on the combustion characteristics. It was found that the mean velocity and turbulence intensity had the maximum value around 200-300 ms and then decreased gradually to a near-zero value after 3000 ms and that the combustion duration was shorten and the flame speed and laminar burning velocity had the highest value under the condition of an excess air ratio of 1.1, an overall charge pressure of 0.15 MPa and an ignition time of 300 ms in the present study. The $CO_2$ concentration was proportional to the ignition time and overall charge pressure, the $CO_2$ concentration was proportional to the excess air ratio, and the UHC concentration was inversely proportional to the ignition time and overall charge pressure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1455_1456
• /
• 2009

$SF_6$ is the most commonly used insulating gas in electrical systems. But In these days $SF_6$ mixtures and alternative gas has been studied because of global warming. so although many studies have been carried out about binary gas mixtures with $SF_6$, few studies were presented about breakdown characteristics of $SF_6/CF_4$ mixtures. At present study the breakdown characteristics of $SF_6/CF_4$ mixtures in quasi-uniform field was performed. This experiments were carried out under AC voltages. The rod-rod electrode was used with 5 mm gap distance. The mixture of $SF_6/CF_4$ containing 20%,50%,70% of $SF_6$ were compared with pure $SF_6$ and $CF_4$ gas and gas pressure ranged from 0.1 to 0.5 MPa. The show that the breakdown voltages of gas were linearly increased according to the pressure in quasi-uniform field. For breakdown vlotage values of $(E/P)_{crit}$ are important. Because If values of (E/P) is a little more than $(E/P)_{crit}$, electrons rapidly increase and streamer discharge gernerates. Through this experiments values of $(E/P)_{crit}$ are found to vary with the ratio of $SF_6/CF_4$ mixture according to the following relationship. $V_b=(E/P)_{crit}{\cdot}p{\cdot}d$

• 조명전기설비학회논문지
• /
• 제20권1호
• /
• pp.85-90
• /
• 2006

본 논문은 불평등 전계의 $SF_6/CO_2$혼합기체 중에서 전구방전특성에 대한 실험결과를 제시한다. 임펄스 전구방전 진전을 코로나 전류와 방전광 이미지의 측정으로 조사하였다. 정 부극성의 전구방전 진전메커니즘은 기본적으로 같았으며, 초기스트리머코로나는 침전극의 끝단에서 발단되어 계단상으로 진전하는 리더에 의해 시험갭을 교락시킨다. 정극성에서 리더펄스의 휴지시간은 부극성에서보다 매우 짧았다. 또한 부극성에서 초기스트리머코로나와 절연파괴사이의 시간간격은 정극성에서보다 매우 길게 나타났다. 정극성에서 방전채널경로는 임의적으로 나타났으며, 부극성에서 리더 채널은 정극성에서 보다 굵고 밝게 나타났다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.540-543
• /
• 2011

이단 마이크로 플라즈마 추력기 (${\mu}PT$)의 개념 설계를 위하여 실험적 연구가 수행되었다. 운전 조건 및 노즐의 설계조건에 따른 전극 간격 및 출구 면적의 변화에 대한 추력기의 성능 최적화 연구가 수행되었다. 운전 압력은 $10^{-1}$ Torr에서 $10^{-4}$ Torr의 진공 조건이며 아르곤 가스의 유량은 5 sccm에서 300 sccm에 대하여 추력기의 성능 검증 연구가 이루어 졌다. 소모전력 약 1 watt에서 5 watt의 운전 상태에서 약 3000에서 4000정도의 비추력이 예상된다. 마이크로 플라즈마 추력기에 의해 발생된 토출 제트의 사진 및 전기적 특성에 대한 결과를 포함하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1732-1734
• /
• 2001

The purpose of this experiment was to develope Triggered Vacuum Switch(TVS) and to improve understanding of the high current vacuum arc phenomena in the TVS. The TVS has an array of rods of alternate polarity in which a fixed gap spacing is maintained between the rods. The cross section of each rod has trapezoidal shape. Breakdown of the TVS produced high current vacuum arc plasma. A spectroscopic measurement was performed over 20 kA peak current in the center of electrodes, in the vicinity of cathode, and outside electrodes. The electrode material tested was Fe. Measured Fe spectrum range was from 200 nm to 900 nm. Measurement result showed that over 90 percent of the charge states were FeII and the others were FeI and FeIII. The electron temperature was determined from the relative line intensity ratio methode of FeII system by assuming the local thermal equilibrium(LTE). The electron temperature at the center of electrodes was measured as 1.5 eV at 26 kA peak current. The electron temperature varied with its peak current. Intensity of spectrums is the highest in the vicinity of the cathode. Further we will also present study result of the diode phenomena in the TVS.

• Transactions on Electrical and Electronic Materials
• /
• 제11권3호
• /
• pp.134-137
• /
• 2010

We have proposed a transflective liquid crystal display (LCD) driven by the fringe field using a liquid crystal (LC) with a negative dielectric anisotropy. The device used different twist angles of the liquid crystals (LC) in the transmissive (T) and the reflective (R) regions when voltage is applied. With the optimization of the pixel electrode width and the distance between them, the LC directors in the R- and T-regions can be rotated by about $22.5^{\circ}$ and $45^{\circ}$ on an average, respectively. As a result, a high image quality transflective LCD with a single gap, a single gamma, and a wide viewing angle characteristics in both the R- and T- regions can be realized.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.139-141
• /
• 2005

It is possble to study charge transfer property which is caused by height variation because we can see the organic materials barrier height and STM tip by organic materials energy band gap. Here, we investigated the negative differential resistance(NDR) and charge transfer property of self-assembled 4,4-Di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene, which has been well known as a conducting molecule. Self-assembly monolayers(SAMs) were prepared on Au(111), which had been thermally deposited onto pre-treatment($H_{2}SO_{4}:H_{2}O_{2}$=3:1) Si. The Au substrate was exposed to a 1 mM/l solution of 1-dodecanethiol in ethanol for 24 hours to form a monolayer. After thorough rinsing the sample, it was exposed to a $0.1{\mu}M/1$ solution of 4,4-Di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene in dimethylformamide(DMF) for 30 min and kept in the dark during immersion to avoid photo-oxidation. After the assembly, the samples were removed from the solutions, rinsed thoroughly with methanol, acetone, and $CH_{2}Cl_{2}$, and finally blown dry with $N_2$. Under these conditions, we measured electrical properties of self-assembly monolayers(SAMs) using ultra high vacuum scanning tunneling microscopy(UHV-STM). The applied voltages were from -1.50 V to -1.20 V with 298 K temperature. The vacuum condition is $6{\times}10^{-8}$ Torr. As a result, we found that NDR and charge transfer property by a little change of height when the voltage is applied between STM tip and electrode.

• 한국전기전자재료학회논문지
• /
• 제25권1호
• /
• pp.62-67
• /
• 2012

Owing to the rapid growth of mobile and electronic equipment miniaturization technology, the supply of micro mobile computing machine has been fast raised. Accordingly they have performed many researches on energy harvesting technology to provide promising power supply equipment to substitute existing batteries. In this paper, in order to have low resonance frequency for piezoelectric energy harvester, we have tried to make it larger than before by adopting nickel that has much higher density than silicon. We have applied it for our energy harvesting actuator instead of the existing silicon based actuator. Through such new concept and approach, we have designed energy harvesting device and made it personally by making with micromachining process. The energy harvester structure has a cantilever type and has a dimension of $10{\times}2.5{\times}0.1\;mm^3$ for length, width and thickness respectively. Its electrode type is formed by using Au/Ti of interdigitate d33 mode. The pattern size and gap size is 50 ${\mu}m$. Based on the measurement of the nickel-based piezoelectric energy harvester, it is found to have 778 Hz for a resonant frequency with no proof mass. In that resonance frequency we could get a maximum output power of 76 ${\mu}W$ at 4.8 $M{\Omega}$ being applied with 1 g acceleration.

• Composites Research
• /
• 제13권6호
• /
• pp.39-46
• /
• 2000

방전가공은 공구와 공작물 사이의 얇은 간극에 전류를 방전시켜 금속을 가공하는 방법이다. 방전 와이어 가공은 전도성 와이어를 사용하는 방전가공의 특수한 예로서, 펀치나 금형제조에 널리 이용되고 있다. 와이어 방전가공에서 와이어는 와이어 가이드 및 외팔보로서 지지되어 있다. 최근 생산성의 증가추세와 더불어 와이어의 이송속도가 증가함에 따라 외팔보의 진동 등으로 인한 기계 정밀도의 저하가 우려된다. 본 논문에서는 정, 동특성이 우수한 방전가공기용 복합재료 외팔보를 설계, 제작하였다. 끼워맞춤길이와 보강 적층수의 변화에 따른 정, 동특성의 변화를 살펴보기 위하여 시편을 제작하여 하중실험을 수행하였다. 또한 유한요소 해석을 수행하여 하중실험의 결과와 상호 비교하였다. 시편실험의 결과로부터 방전가공기용 복합재료 외팔보를 설계, 제작하여 기존의 금속 외팔보와 그 성능을 상호 비교하였다.

• 한국의학물리학회지:의학물리
• /
• 제13권2호
• /
• pp.69-73
• /
• 2002

본 연구는 제작된 평행평판형 검출기에서 두 전극간의 거리에 따른 극성효과의 정도를 확인하기 위하여 실행되었다. 개발된 전리함의 극성효과를 측정하기 위하여 평행평판형 전리함의 윗면과 아래 면의 전극에 극성을 바꾸어가며 방사선을 조사하고 그에 의하여 생성된 전하를 측정하여 두 양을 비교하였다. 실험은 두 전극간의 거리가 3, 6, 10 mm 일 때 각각의 명목상 체적이 0.9, 1.9, 3.1 cc인 평행평판형 전리함에 대하여 실행하였다. 조사된 방사선은 6, 10 MV 광자선과 4, 6, 9, 12, 16 MeV의 전자선이며, SSD는 100 cm 이었고, 조사면 크기는 광자선의 경우는 10$\times$10 ㎤ 이고 전자선의 경우는 10$\times$10 $\textrm{cm}^2$을 사용하였으며, 측정점은 최대선량점이고, 선량률은 240 MU/min 으로 하였다. 평행평판형 전리함의 극성의 변환은 평행평판형 전리함의 윗면 즉, 방사선이 입사되는 면의 전극이 (+)극을 갖고 아래 면이 (-)극을 갖는 positive와 방사선이 입사되는 면의 전극이 (-)극을 갖고 아래 면이 (+)극을 갖게 되는 negative 측정으로 시행하였다. 실험결과는 광자선의 경우는 0.5 % 이내의 극성효과를 나타냈고, 전자선의 경우는 1% 에서 3.5% 까지 나타났으며, 높은 에너지를 갖는 16 MeV 전자선의 경우가 다른 에너지의 전자선의 경우 보다 극성효과의 영향이 적음을 알 수 있다.