• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.121-122
• /
• 2007

Single crystal $CuAlSe_2$ layers were grown on thoroughly etched sem-insulating GaAs(l00) substrate at $410^{\circ}C$ with hot wall epitaxy (HWE) system by evaporating $CuAlSe_2$ source at $680^{\circ}C$. The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of single crystal $CuAlSe_2$ thin films measured with Hall effect by van der Pauw method are $9.24{\times}l0^{16}\;cm^{-3}$ and $295\;cm^2/V{\cdot}s$ at 293K, respectively. The temperature dependence of the energy band gap of the $CuAlSe_2$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)\;=\;2.8382\;eV\;-\;(8.68\;{\times}\;10^{-4}\;eV/K)T^2/(T\;+\;155\;K)$.

• 한국의학물리학회지:의학물리
• /
• 제35권1호
• /
• pp.10-15
• /
• 2024

Purpose: This study aimed to comprehensively investigate the diverse characteristics of a novel commercial bolus, CLEANBOLUS-WHITE (CBW), to ascertain its suitability for clinical application. Methods: The evaluation of CBW encompassed both physical and biological assessments. Physical parameters such as mass density and shore hardness were measured alongside analyses of element composition. Biological evaluations included assessments for skin irritation and cytotoxicity. Dosimetric properties were examined by calculating surface dose and beam quality using a treatment planning system (TPS). Additionally, doses were measured at maximum and reference depths, and the results were compared with those obtained using a solid water phantom. The effect of air gap on dose measurement was also investigated by comparing measured doses on the RANDO phantom, under the bolus, with doses calculated from the TPS. Results: Biological evaluation confirmed that CBW is non-cytotoxic, nonirritant, and non-sensitizing. The bolus exhibited a mass density of 1.02 g/cm³ and 14 shore 00. Dosimetric evaluations revealed that using the 0.5 cm CBW resulted in less than a 1% difference compared to using the solid water phantom. Furthermore, beam quality calculations in the TPS indicated increased surface dose with the bolus. The air gap effect on dose measurement was deemed negligible, with a difference of approximately 1% between calculated and measured doses, aligning with measurement uncertainty. Conclusions: CBW demonstrates outstanding properties for clinical utilization. The dosimetric evaluation underscores a strong agreement between calculated and measured doses, validating its reliability in both planning and clinical settings.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4120-4124
• /
• 2023

High-level radioactive waste produced by nuclear power plants are disposed subterraneously utilizing an engineered barrier system (EBS). A gap inevitably exists between the disposal canisters and buffer materials, which may have a negative effect on the thermal transfer and water-blocking efficiency of the system. As few previous experimental works have quantified this effect, this study aimed to create an experimental model for investigating differences in the temperature changes of bentonite buffer in the presence and absence of air gaps between it and a surrounding stainless steel cell. Three test scenarios comprised an empty cell and cells partially or completely filled with bentonite. The temperature was measured inside the buffers and on the inner surface of their surrounding cells, which were artificially heated. The time required for the entire system to reach 100℃ was approximately 40% faster with no gap between the inner cell surface and the bentonite. This suggests that rock-buffer spaces should be filled in practice to ensure the rapid dissipation of heat from the buffer materials to their surroundings. However, it can be advantageous to retain buffer-canister gaps to lower the peak buffer temperature.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.373-376
• /
• 2004

The measurement of diffraction of LCOS microdisplay with various pixel size, interpixel gap, pixel height and coatings demonstrates that pixel size is the leading factor for diffraction loss, while the role of varying pixel gap is less significant comparatively. One-dimensional diffraction simulation is found to be in good agreement with the measurement. Noticeable deviation occurs when pixel size is as small as 8um.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1997년도 특별강연 및 춘계학술발표 개요집
• /
• pp.107-111
• /
• 1997

In this paper distribution of welding residual stress on the double fillet welded joint which exits and not exits root gap, i.e. full penetration and partial penetration is investigated by two dimensional cunduct and thermal elasto-plastic analysis. And stress distribution on notch-tip of the structure where welding residual stress regarded as initial stress and then external load is added is also investigated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.210-213
• /
• 1995

In this study,the effect of both process parameters (wheel velocity, friction coefficients between die and billet, etc) and die-shape (abutment height and shape, flash gap, etc.) on the surface defect on forming process is theoretically investigated. For this work, computer simulation was performed by using the DEFORM, a commercial FEM code. Through numerous simulations with different parameters and die shapes, We propose one optimal die shape for CONFORM process which can remove surface defect.

• 한국정밀공학회지
• /
• 제17권3호
• /
• pp.33-38
• /
• 2000

In process of tube spinning far shock absorber on vehicles, the selection of feed rate and rounding radius of forming roller and revolution speed of tube and forming roller, forming gap between die and forming roller are very important factors to obtain the optimal process result. In this paper, rigid-plastic FEM and UBET analysis are applied to verify effect of each factors by forming load. We can obtain the optimal conditions to prevent defects during processing.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.1141-1146
• /
• 1993

The problem of tension control in metal-strip processing line is discussed. A new mathematical dynamic model which relates tension change, motor-speed change and roll-gap change is developed. Through the computer simulation of this model, parameter sensitivity, the tension transfer phenominon, and static and dynamic characteristics of strip tension were studied. Guidelines are developed to help one selecting locations of the master-speed drive in multi-drive speed control for tension adjustment and reducing the effect of interaction between tension and roll gap control.

• 사회복지연구
• /
• 제41권2호
• /
• pp.279-308
• /
• 2010

본 연구는 '자녀유무별 여성임금격차(Family gap)' 의 국가별 차이를 가져오는 제도적 요인을 탐색하기 위해 OECD 14개국을 대상으로 가족정책, 노동시장 및 사회구조와 Family gap의 관계를 분석하는 것을 목적으로 한다. 이 때 가족정책을 여성의 노동역할을 지원하는 '고용지원 가족정책' 과 양육역할을 지원하는 '양육지원 가족정책' 으로 분류하여 각각이 가지는 정책적 지향에 따라 Family gap에 미치는 영향을 구분하였으며 노동시장 및 사회구조를 분석하기 위한 변수로 노동시장 성분절 구조, 임금불평등 구조, 여성의 사회적 지위와 경제적 상황을 모형에 포함하였다. 분석을 위하여 먼저 헤크만 2단계추정법(Heckman's two stage estimation)을 통해 국가별 Family gap 크기를 측정한 후 퍼지셋분석(FSQCA)을 통해 어떠한 제도적 조합이 낮은 Family gap을 가져오는지 검증하였다. 분석결과 낮은 Family gap은 '고용지원 가족정책' 의 발달과 '낮은 임금불평등 구조' 의 결합인과관계(conjunctual causation)에 의해 발생하는 것으로 나타났다. 분석결과를 통해 '자녀가 있는 여성' 의 양육으로 인한 불리함을 줄이고 상대적인 임금수준을 높이기 위한 제도적 노력으로 여성의 고용지속 및 양육의 사회화를 지원하고 여성과 남성 모두의 일-가족 양립을 지향하는 가족정책의 확충과 함께 낮은 노동지위에 있는 여성의 임금 및 고용조건의 보호가 우선과제가 된다는 정책적 함의를 제시하였다.

• 한국콘텐츠학회논문지
• /
• 제11권4호
• /
• pp.273-282
• /
• 2011

본 연구는 국소 허혈성 뇌손상 흰쥐 모델에서 tDCS의 자극 적용시간을 달리하였을 때, 앞다리 운동감각 기능변화와 신경영양인자(GAP-43)발현에 미치는 영향을 알아보고자 하였다. 뇌손상 모델은 Sprague -Dawley계 흰쥐 80마리를 'Longa'방법을 이용하여 중대뇌동맥(middle cerebral artery)을 폐색하여 유발하였고, 실험군을 4개로 나누었다; 실험군I은 허혈성 뇌손상 유발군(n=20), 실험군II는 허혈성 뇌손상 유발 후 tDCS(10분) 적용군(n=20), 실험군III은 허혈성 뇌손상 유발 후 tDCS(20분) 적용군(n=20), 실험군IV는 허혈성 뇌손상 유발 후 tDCS(30분) 적용군(n=20)으로 나누었다. 앞다리운동감각 기능검사를 위해 수정된 앞다리배치 검사와 단일 팰릿 닿기 검사를 실시하였으며, 신경가소성에 대한 면역조직화학적 검사로 운동감각 영역에서의 GAP-43 단백질 발현을 관찰하였다. 앞다리운동감각 검사는 14일에서 실험군III (p<0.05)이 다른 군들에 비해 유의한 차이를 보였으며, 단일 팰릿 닿기 검사는 14일에서 실험군III(p<0.01)과 실험군IV(p<0.05)에서 유의한 차이를 보였다. 또한, 면역조직학적 검사는 14일에 실험군III이 다른 군들에 비해 현저한 면역양성반응의 증가를 보였다. 따라서, 0.1 mA의 강도로 20분간 적용했을 때가 앞다리운동감각 기능과 신경가역성 인자 GAP-43 발현에 가장 좋은 조건임을 알 수 있었다.