• 에너지공학
• /
• 제1권1호
• /
• pp.66-75
• /
• 1992

이중창의 열전달 성능을 수치해석과 실험적 방법을 통하여 조사하였다. 이중창 사이의 간격이 0.5cm에서 10cm사이의 실제적인 범위에서 이중창 사이의 간격이 작을 때에는 전도에 의한 열전달이 두드러졌으며 이중창 사이의 간격이 넓어지고 Rayleigh 수가 높은 영역에서는 대류에 의한 열전달이 크게 나타나 이중창 간격이 넓어진 이점을 크게 상쇄시켰다. 이와 같은 이중창 단열문제에 대한 보완책으로 이중창 중앙에 하나의 유리창을 더 설치한 3중창 경우에 대해 대류열전달 감소효과와 복사열차폐(radiation shield) 효과를 검토하였으며 또한 이중창 중간 높이에 스페이서(spacer)를 설치하여 대류유동 강도를 줄이는 방안 등에 대한 분석이 이루어졌다. 3중창을 사용한 경우에는 이중창에 비해 30-50%, 이중창에 스페이서를 설치한 경우에는 l0% 정도의 에너지 절약 효과를 기대할 수 있다.

• Journal of Welding and Joining
• /
• 제20권3호
• /
• pp.122-128
• /
• 2002

The laser welding in the automotive industries has been used widely for the butt joint of blank sheets rather than the lap joint of automotive body panels. But as a substitute far the spot welding of automotive body panels, the so called three dimensional laser welding will be important far the body panel engineers. Specially the laser welding of body panels with a smooth weld line is applied increasingly, for example, to the side panels. So far, some criteria of the laser weld quality was suggested by in-house regulations or national standards from experiences and/or rule of thumbs. In the manufacturing places, a go or no-go criterion is adopted because of the simplicity or a lack of rational criteria. It is true specially for the selection of the process parameters, which gives the basic causes for the good quality of laser welds. In this study, the effects of joint combination, gap and welding speed on the lap joint $CO_2$ laser welding of two mild steel sheets with different thicknesses are obtained through a $2{\times}3{\times}7$ factorial experiment. The results of the weld quality are statistically analysed using analysis of variance (ANOVA) and compared between two characteristic zones, which are separated by the type of sectional shapes and the level of input energy per volume. The thickness combinations are 0.8mm/1.2mm, 1.2mm/0.8mm of mild steel sheets. The welding speed covers from the deep penetration to the partial penetration. The gap size has three levels of no-gap, 0.16m, and 0.26mm. The bead width, penetration depth and input energy per volume are measured and used as the weld quality criteria.

• 설비공학논문집
• /
• 제18권3호
• /
• pp.254-261
• /
• 2006

The effect of enhanced geometry (pore diameter, gap width) is investigated on the pool boiling of R-123/oil mixture for the enhanced tubes having pores with connecting gaps. Tubes with different pore diameters (and corresponding gap widths) are specially made. Significant heat transfer degradation by oil is observed for the present enhanced tubes. At 5% oil concentration, the degradation is 26 to 49% for $T_{sat}=4.4^{\circ}C$. The degradation increases 50 to 67% for $T_{sat}=26.7^{\circ}C$. The heat transfer degradation is significant even with small amount of oil (20 to 38% degradation at 1% oil concentration for $T_{sat}=4.4^{\circ}C$), probably due to the accumulation of oil in sub-tunnels. The pore size (or gap width) has a significant effect on the heat transfer degradation. The maximum degradation is observed for $d_p$ = 0.20 mm tube at $T_{sat}=4.4^{\circ}C$, and for $d_p$=0.23 mm tube at $T_{sat}=26.7^{\circ}C$. The minimum degradation is observed for $d_p$=0.27 mm tube for both saturation temperatures. It appears that the oil removal is facilitated for the larger pore diameter (along with larger gap) tube. The highest heat transfer coefficient with oil is obtained for $d_p$ =0.23 mm tube, which yielded the highest heat transfer coefficient for pure R-123. The heat transfer degradation increases as the heat flux decreases.

• Journal of Korean Neurosurgical Society
• /
• 제60권4호
• /
• pp.404-416
• /
• 2017

Objective : Functional and neural tissue recovery has been reported in many animal studies conducted with stem cells. However, the combined effect of cytokines and stem cells has not yet been adequately researched. Here, we analyzed the additive effects of granulocyte colony-stimulating factor (GCSF) on adipose-derived stem cells (ADSCs) infusion in the treatment of acute spinal cord injury (SCI) in rats. Methods : Four days after intrathecal infusion tubes implantation in Sprague-Dawley rats, SCI was induced with an infinite horizon impactor. In the Sham group (n=5), phosphate-buffered saline was injected 3, 7, and 14 days after SCI. GCSF, ADSCs, and ADSCs with GCSF were injected at the same time in the GCSF (n=8), ADSC (n=8), and ADSC+GCSF groups (n=7), respectively. Results : The ADSC and ADSC+GCSF groups, but not the GCSF group, showed significantly higher Basso-Beattie-Bresnahan scores than the Sham group during 8 weeks (p<0.01), but no significant difference between the ADSC and ADSC+GCSF groups. In the ladder rung test, all four groups were significantly different from each other, with the ADSC+GCSF group showing the best improvement (p<0.01). On immunofluorescent staining (GAP43, MAP2), western blotting (GAP43), and reverse transcription polymerase chain reaction (GAP43, nerve growth factor), the ADSC and ADSC+GCSF groups showed higher levels than the Sham and GCSF groups. Conclusion : Our analyses suggest that the combination of GCSF and ADSCs infusions in acute SCI in the rat does not have a significant additive effect. Hence, when combination agents for SCI stem cell therapy are considered, molecules other than GCSF, or modifications to the methodology, should be investigated.

• 한국식품위생안전성학회지
• /
• 제33권1호
• /
• pp.12-22
• /
• 2018

미국 정부는 2011년 식품안전현대화법(FSMA, Food Safety Modernization Act)을 제정하였으며 단계적으로 실시 및 실시예정에 있다. 이중 농산물안전(Produce Safety) 최종규칙은 농산물 재배, 수확, 포장 및 보관과 관련된 생물학적 위해요소에 초점을 맞추고 있는데, 영농규모 등에 따라 2017년 1월부터 단계적으로 시행되고 있다. FSMA의 농산물안전 규칙 중 현장에서 준수해야 하는 조항을 55개 선별하여 한국 GAP기준과 비교한 결과, 비교 대상인 두 개의 기준이 조항별 관리사항에 대해 1:1로 단순비교하기에는 어려운 점이 있으나 상당수의 한국 GAP기준이 대응이 가능하다. 다만 한국 GAP기준은 포괄적 기준으로 평가자에 따라 다른 판단을 할 여지가 많으므로 기준의 세부 사항의 보강이 필요하다. 조항별로 보면, 작업자 안전위생(FSMA Subpart D)에 대하여 한국 GAP기준은 가장 높게 대응이 되며, 그 다음으로는 가축 및 야생 동물(FSMA Subpart I), 건물 장비 도구(FSMA Subpart L), 재배 수확 등의 활동(FSMA Subpart K) 순으로 대응이 되고 있다. 그러나, 농업용수 관리(FSMA Subpart E)와 관리자의 자격 및 교육(FSMA Subpart C)에 대해서는 다소 미흡한 실정이며, 가축분뇨기반 퇴비 관리(FSMA Subpart F)에 대해서는 대응이 취약한 편이다. FSMA 규칙은 인증 기준은 아니나, 세계적으로 식품안전의 표준을 선도하는 미국이 제시한 규칙인 만큼 파급력이 상당할 것으로 예상된다. 따라서 국내 농산물 기준 중 FSMA 규칙에서 강조하는 미생물적 안전성에 대응하는 기준이 GAP기준이므로 한국 GAP기준의 재검토를 통해 우리 농산물의 품질 향상 및 수출확대에 도움이 되기를 바란다.

• 한국정밀공학회지
• /
• 제33권6호
• /
• pp.477-483
• /
• 2016

The spring-back and bow phenomenon in the roll forming process are important factors regarding the accuracy of evaluation of production goods. The purpose of this study was to determine the influence of spring-back and bow phenomenon according to the main variables (forming velocity and roll gap). The material of the forming sheet was high tension steel (SPFH 590), which has been used commonly in recent years. In order to accurately measure the spring-back and bow phenomenon, the forming sheet was formed into a V-shape. The study was applied to OFAT (One Factor at a Time) experimentation, with respect to the experimental variables (the forming speed and the roll gap). In the experimental results, the forming speed had a small influence on the spring-back and bow phenomenon. However, the roll gap had a greater influence on the springback and the bow phenomenon, as opposed to the forming speed.

• Advances in nano research
• /
• 제9권2호
• /
• pp.105-112
• /
• 2020

Silicene is a two-dimensional (2D) derivative of silicon (Si) arranged in honeycomb lattice. It is predicted to be compatible with the present fabrication technology. However, its gapless properties (neglecting the spin-orbiting effect) hinders its application as digital switching devices. Thus, a suitable band gap engineering technique is required. In the present work, the band structure and density of states of uniformly doped silicene are obtained using the nearest neighbour tight-binding (NNTB) model. The results show that uniform substitutional doping using aluminium (Al) has successfully induced band gap in silicene. The band structures of the presented model are in good agreement with published results in terms of the valence band and conduction band. The band gap values extracted from the presented models are 0.39 eV and 0.78 eV for uniformly doped silicene with Al at the doping concentration of 12.5% and 25% respectively. The results show that the engineered band gap values are within the range for electronic switching applications. The conclusions of this study envisage that the uniformly doped silicene with Al can be further explored and applied in the future nanoelectronic devices.

• 한국생활과학회지
• /
• 제13권6호
• /
• pp.959-966
• /
• 2004

The purpose of this research is to analyze the shape of gathered skirts made by different gatherings. The shape of gathered skirts is affected by the amount of the gatherings that control fullness along a waistline seam. The gap also has an effect on the shape. We made a few experiments to make gathered skirts in different gathering conditions. The conditions include two types of ratio of gathers, which were given the total amount of gathering, and two types of spread of gathers, which were calculated for waist and hip. Experiments were conducted to figure out the dressed shape through 3-D measurement Exyma- WBS, and also to investigate the proportion, area distribution, and gap of the shape of gathered skirts on the horizontal section map with Rapid Form 2004 SP3, a software for 3-D shape analysis. As the results show, there were differences among the proportion, area distribution, and gap of the dressed shape. It showed that the shape on the horizontal section map was different because the shape between waist and hip per parts on body was not the same.

• 노동경제논집
• /
• 제40권4호
• /
• pp.115-158
• /
• 2017

본 연구는 한국에서의 직종 내 잔차 성별 임금격차와 노동시간 간의 관계를 분석하였다. 한국의 장시간 노동 문화는 평소 가사 및 돌봄 노동을 많이 하지 않는 한국 남성 기준에 맞추어진 것으로, 따라서 노동시간이 긴 직종일수록 이는 여성에게 불리하게 작용하여 직종 내 차별에 의한 성별 임금격차가 커질 수 있다. 본 연구는 이를 실증분석 하고자 하였으며, 분석 결과, 한국에서는 대부분의 직종에서 긴 노동시간에 대한 임금 프리미엄이 높지 않으며, 노동시간은 남성 집중직종에서는 잔차 성별 임금격차에 유의미한 양의 영향을 미치지만, 여성 집중직종에서는 그렇지 않은 것으로 나타났다.

• 대한기계학회논문집B
• /
• 제28권2호
• /
• pp.127-134
• /
• 2004

Control of drag force on a circular cylinder using multiple detached splitter plates is numerically studied for laminar flow Two splitter plates with the same length as the cylinder diameter (d) are placed horizontally in the upstream of the cylinder and in the near-wake region, respectively. Their positions are described by the gap ratios (G$_1$/d, G$_2$/d), where G$_1$ represents the gap between the cylinder stagnation point and the rear edge of the upstream splitter plate, and G$_2$ represents the gap between the cylinder base point and the leading edge of the rear splitter plate. The drag varies with the two gap ratios; it has the minimum value at a certain set of gap ratios for each Reynolds number The upstream splitter plate decreases the stagnation pressure, while the rear splitter plate increases the base pressure by suppressing vortex shedding. This combined effect causes a significant drag reduction on the cylinder Particularly, the drag sharply increases past an optimum G$_2$/d; this seems to be related to a sudden change in bubble size in the wake region.