• Journal of the Korean Institute of Gas
• /
• v.2 no.2
• /
• pp.55-60
• /
• 1998

In this study, we investigated the dust explosion characteristics by determining minimum ignition energy and explosion limit for this experiment, we used pine-tree dust which was used widely for the filler of thermosetting resin. The experiment was accomplished according to the variation of discharge gap, dust concentration, particle size and humidity. The result of this experiment are as follows; (1) The relation between the discharge gap and ignition energy was that ignition energy decreased according as the discharge gap became small, but increased when the discharge gap was below 4mm and suddenly became infinite when the discharge gap was below. So, we knew that this infinite value was limit discharge gap. (2) When the dust concentration increase and the particle size became microscopic it was easy to explore and in the same particle size, if the humidity increase the minimum ingnition energy decreased.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.4 s.97
• /
• pp.37-45
• /
• 1999

Many automated welding equipment are used in the industry. However, there are some problems to get quality welds because of the geometric error, thermal distortion, and incorrect joint fit-up. These factors can make the gap between base plates in case of a thick plate welding. The welding product with the quality welds can not be obtained without consideration of the gap. In this paper, the robot path and welding conditions are modified to get the quality weld by detecting the position and size of the gap. In this work, a low-priced laser range sensor is used. The 3-dimensional information is obtained using the motion of a robot, which holds a laser range sensor. The position and size of the gap is calculated using signal processing of the measured 3-dimensional information of joint profile geometry. The data measured by a laser range sensor is segmented by an iterative end point method. The segmented data is optimized by the least square method. The existence of gap is detected by comparing the data with the segmented shape of template. The effects of robot measuring speed and gap size are also tested. The recognizability fo the gap is verified as good by comparing the real joint profile and the calculated joint profile using the signal processing.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.3
• /
• pp.254-260
• /
• 2019

Purpose: To evaluate the relationship between the knee function at 1 year postoperation and the gap difference (90° flexion gap-extension gap) in total knee replacement. Materials and Methods: Eighty-two consecutive osteoarthritis knees that underwent primary total knee replacement using navigation from March 2017 June 2017 were evaluated prospectively. The gap was measured using navigation after reducing the patella with towel clips. After checking the average values of the medial and lateral gaps at extension and 90° flexion knee, the gap difference (90° flexion gap-extension gap) was calculated. The knees were divided into three groups according to the gap difference (gap difference<0 mm, 0 mm≤gap difference<2 mm, 2 mm≤gap difference). The Knee Society score (KSS) and maximal knee flexion were compared at 1 year postoperation among three groups. Results: The numbers of knees according to groups were 37, 29, and 16 knees in regular order. The average of the KSS knee, KSS function, and maximal knee flexion at the 1-year follow-up were 81.21±8.31, 71.34±9.84, and 126.48°±7.28°, respectively. No statistically significant difference in KSS was observed among the 3 groups. The third group (2 mm≤gap difference) showed a larger maximal knee flexion than the other groups in the Mann-Whitney test. Conclusion: The group of total knee replacement (2 mm≤90° flexion gap-extension gap) showed larger maximal knee flexion than the other groups at the 1-year follow-up in statistics.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.5
• /
• pp.338-346
• /
• 2001

An infrared imaging method in which direct measurement of energy gap variations can be achieved by digital image processing is proposed. This method allows economic and easy evaluation of the temperature coefficients of a semiconductor energy gap. The key components of the method are a polychromator, a computer equipped with a frame grabber and a variable temperature cryostat. Tentative experimentation conducted on LEC grown semi-insulating GaAs has resulted in a fairly good agreement with the theoretical model. This proposed method could be applicable for most compound semiconductors.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.47-49
• /
• 1999

The air and impurity gaps generated by a defect in homogeneous material have a difference index of refraction compare to the homogeneous material. Therefore an electromagnetic wave has a multiple reflection between the two indices of refraction. If the gap has a small thickness, it is difficult to know the gap in time domain. However, the presence of the gaps can be known in frequency domain by total transmission and phase difference. Also, the thickness and index of refraction can be measured by well known Febry-Perot theory.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.218-219
• /
• 2000

정보화 사회의 발전과 더불어 디스플레이는 CRT의 고성능화와 병행해 각종 평판 디스플레이의 전개와 실용화가 진행되어 왔다. TV용은 CRT (cathod ray tube)방식이 시장의 90% 이상을 차지하고 있으며, 앞으로도 연간 약 3%의 성장이 예상된다. CRT는 많은 공간 소비와 높은 소비전력 유해파 등으로 인하여 가정용 TV의 경우 PDP가 컴퓨터 모니터는 LCD방식이 디스플레이 시장의 주역을 담당하고 있으며, 그 성능, 비용, 용도에 따라 나뉘어 빠른 비율로 성정해 갈 것으로 예상된다. 이러한 여러 가지 평판 디스플레이들은 특성에 따라 EL과 FED는 10인치 이하의 소형 디스플레이에 주로 사용되어 지며, LCD는 10인치 이하에서부터 30인치까지의 소·중형, CRT는 10인치 이상 40인치 이하의 중·대형에 사용되어 지고, PDP는 30인치 이상의 대형 디스플레이에 사용된다. 대형 PDP나 LCD는 휘도를 높이고 양질의 영상 표현을 위해서는 cell-gap의 균일성이 요구되어 진다. cell-gap의 측정은 제품이 거의 완성 단계 있을 때 이루어져야 함으로 비접촉식이 필연적이며, 실시간 적이어야만 가능하다. (중략)

• Electrical & Electronic Materials
• /
• v.7 no.6
• /
• pp.490-495
• /
• 1994

We investigated photoreflectance of semi-insulating GaAs with respect to modulation sources, that is, modulation beam intensity, modulation frequency, temperature, and thickness of sample. PR spectra by each modulation source turned out to be signals of low electric field third differential, and band gap values of sample were fitted by least square root method for Aspnes' theoretical equation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.733-734
• /
• 2010

• Journal of KIISE:Software and Applications
• /
• v.27 no.6
• /
• pp.660-667
• /
• 2000

In this paper, a word segmentation method for handwritten Korean text line images is proposed. The method uses gap information to segment words in line images, where the gap is defined as a white run obtained after vertical projection of line images. Each gap is assigned to one of inter-word gap and inter-character gap based on gap distance. We take up three distance measures which have been proposed for the word segmentation of handwritten English text line images. Then we test three clustering techniques to detect the best combination of gap metrics and classification techniques for Korean text line images. The experiment has been done with 305 text line images extracted manually from live mail pieces. The experimental result demonstrates the superiority of BB(Bounding Box) distance measure and sequential clustering approach, in which the cumulative word segmentation accuracy up to the third hypothesis is 88.52%. Given a line image, the processing time is about 0.05 second.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.20 no.2
• /
• pp.62-68
• /
• 2016

Purpose In a cyclosporine experiment using a robotic liquid handing system has found a deviation of its standard curve and low reproducibility of patients's results. The difference of the test is that methanol is mixed with samples and the extractions are used for the test. Therefore, we assumed that the abnormal test results came from using methanol and conducted this test. In a manual of a robotic liquid handling system mentions that we can choose several setting parameters depending on the viscosity of the liquids being used, the size of the sampling tips and the motor speeds that you elect to use but there's no exact order. This study was undertaken to confirm pipetting ability depending on types of liquids and investigate proper setting parameters for the optimum dispensing ability. Materials and Methods 4types of liquids(water, serum, methanol, PEG 6000(25%)) and $TSH^{125}I$ tracer(515 kBq) are used to confirm pipetting ability. 29 specimens for Cyclosporine test are used to compare results. Prepare 8 plastic tubes for each of the liquids and with multi pipette $400{\mu}l$ of each liquid is dispensed to 8 tubes and $100{\mu}l$ of $TSH^{125}I$ tracer are dispensed to all of the tubes. From the prepared samples, $100{\mu}l$ of liquids are dispensed using a robotic liquid handing system, counted and calculated its CV(%) depending on types of liquids. And then by adjusting several setting parameters(air gap, dispense time, delay time) the change of the CV(%)are calcutated and finds optimum setting parameters. 29 specimens are tested with 3 methods. The first(A) is manual method and the second(B) is used robotic liquid handling system with existing parameters. The third(C) is used robotic liquid handling system with adjusted parameters. Pipetting ability depending on types of liquids is assessed with CV(%). On the basis of (A), patients's test results are compared (A)and(B), (A)and(C) and they are assessed with %RE(%Relative error) and %Diff(%Difference). Results The CV(%) of the CPM depending on liquid types were water 0.88, serum 0.95, methanol 10.22 and PEG 0.68. As expected dispensing of methanol using a liquid handling system was the problem and others were good. The methanol's dispensing were conducted by adjusting several setting parameters. When transport air gap 0 was adjusted to 2 and 5, CV(%) were 20.16, 12.54 and when system air gap 0 was adjusted to 2 and 5, CV(%) were 8.94, 1.36. When adjusted to system air gap 2, transport air gap 2 was 12.96 and adjusted to system air gap 5, Transport air gap 5 was 1.33. When dispense speed was adjusted 300 to 100, CV(%) was 13.32 and when dispense delay was adjusted 200 to 100 was 13.55. When compared (B) to (A), the result increased 99.44% and %RE was 93.59%. When compared (C-system air gap was adjusted 0 to 5) to (A), the result increased 6.75% and %RE was 5.10%. Conclusion Adjusting speed and delay time of aspiration and dispense was meaningless but changing system air gap was effective. By adjusting several parameters proper value was found and it affected the practical result of the experiment. To optimize the system active efforts are needed through the test and in case of dispensing new types of liquids proper test is required to check the liquid is suitable for using the equipment.