• 제목/요약/키워드: Gamma-ray Spectroscope

검색결과 4건 처리시간 0.021초

방사성 의약품 자동합성장치용 단채널 감마선 분광기 보드의 설계 및 제작 (Development of One-channel Gamma ray spectroscope for Automatic Radiopharmaceutical Synthesis System)

  • 송관훈;김광수
    • 전자공학회논문지
    • /
    • 제51권4호
    • /
    • pp.193-200
    • /
    • 2014
  • 본 논문에서는 방사성 의약품의 자동합성장치에 사용되는 단채널 감마선 분광기를 보드 형태로 설계, 제작하고 그 특성을 측정 분석하였다. 감마선 검출을 위해 CZT (CdZnTe) spear 검출기를 이용하였고 아날로그 방식을 적용한 신호처리 보드의 형태로 감마선 분광기를 제작하였다. 측정을 위하여 방사성 물질인 Co-60을 시료로 사용하였으며, 최대 1173keV까지의 감마선 에너지 스펙트럼을 얻을 수 있었다. 아날로그 보드는 CZT spear 검출기에서 감마선을 검출하여 출력하는 신호를 적절히 변화시켜주기 위한 SF (shaping filter) 및 PHA (peak and hold amplifier)와 수치화된 감마선 신호 데이터를 계산하기 위한 ADC(analog to digital converter)와 FPGA (field programmable gate array)로 구성되었다.

Cd$_{80}$ Zn$_{20}$Te를 사용한 MIM 구조의 감마선 탐지 소자 제작 및 탐지 특성에 관한 연구 (A Study on the Fabrication and Detection of Cd$_{80}$ Zn$_{20}$Te Gamma-ray detector with MIM Structure)

  • 최명진;왕진석
    • 전자공학회논문지D
    • /
    • 제34D권4호
    • /
    • pp.47-53
    • /
    • 1997
  • We fabricated gamma radiation detector using high resistive p-Cd$_{80}$Zn$_{20}$Te grown by high pressure bridgman method and forming au thin film electrode by chemically electroless deposition method. The device of Au/Cd$_{80}$Zn$_{20}$Te/Au is a typical MIM structure. The characteristic of current-voltage showed good linearity to 3kV/cm but it depend on the square of electric field over 3kV/cm. As the results of rutherford backscattering spectroscope(RBS) and auger spectroscope on the Au/Cd$_{80}$Zn$_{20}$Te, Au penetrated to the surface of Cd$_{80}$Zn$_{20}$Te detector absorbed slightly high energy radiation like a few hundred keV and showed good performance to detect low energy gamma ray.mma ray.

  • PDF

Sn-Xwt%Cu 솔더의 젖음성에 관한 연구 (The wettability of Sn-Xwt%Cu solder)

  • 이종범;노보인;정승부
    • 대한용접접합학회:학술대회논문집
    • /
    • 대한용접접합학회 2006년 추계학술발표대회 개요집
    • /
    • pp.199-201
    • /
    • 2006
  • The wetting balance test was carried out to compare the wettability of Sn-Xwt%Cu($0{\sim}3$wt%) solders. And, IMCs which were formed at interface between solders and substrates were investigated by using XRD(x-ray diffractometer), SEM(scanning electron microscope) and EDS(energy dispersive spectroscope). The value of ${\gamma}_[fl}$ and(${\gamma}_{fs}-{\gamma}_{ls}$) had a tendency to increase with increasing wetting temperature. The activation energy that was calculated between the bare Cu substrate and flux was increased in the following order Sn-0.7wt%Cu(68.42 kJ/mol);Sn-3.0wt%Cu(72.66 kJ/mol);100wt%Sn solder(94.53 kJ/mol).

  • PDF

지구통계학적 방법에 의한 영광원전주변 토층내 Cs-137 및 K-40 측정 결과의 해석 (Geostatistical Interpretation of Cs-137 and K-40 Result of the Lithosphere in the Vicinity of Youngkwang Nuclear Power Plant)

  • 김경웅;이재석;문승현;박철승;고일원;고은정;조병옥;정철영;전수열
    • 자원환경지질
    • /
    • 제35권6호
    • /
    • pp.545-552
    • /
    • 2002
  • 광주과학기술원 에너지환경연구센터에서는 2000년 한해 동안 원자력발전소 주변 환경방사선 조사계획에 의거하여 영광원자력발전소 부지외부 및 비교지점에서 토양, 하천토 및 해저토 등 환경방사능 시료에 대한 감마선 방출핵종 분석을 수행하였다. 분석결과 토양과 하천토 및 해저토에서 인공핵종인 Cs-137이 검출되었으나 지난 3년간(1997-99)의 측정치인 평상범위 이내의 값이었고, 원전과 관계없는 일반지역에서 검출되는 수준과도 동일하며, 반감기가 짧은 Cs-134는 전혀 검출되지 않은 것으로 보아 원전가동에 의한 영향이 아님을 알 수 있다. 환경시료 측정에 대한 품질관리를 위해 임의로 선정된 가마미인근에서 해저토 시료를 각각 5지점에서 중복시료로 채취하석 상대 검출효율이 각각 30%, 45%인 2대의 HPGe Gamma-ray Spectroscope로 동시에 분석하여 환경방사선 측정자료와 분석의 신뢰도를 향상시키기 위한 지구통계학적인 연구를 수행하였다. 이를 위해서 두 가지 요인을 설정하여 시료분석방법과 채취지점의 차이를 이원배치 분산분석을 수행하였다. Two-way ANOVA 결과 Cs-137 및 K-40의 경우 시료채취 지점의 차이에 의한 분산만이 유효하며, 시료채취 및 분석과정에서의 생기는 오차는 무시할 만하여 지금까지 수행되어진 시료채취 및 분석방법은 신뢰할 만하다고 할 수 있었다.