• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.1
• /
• pp.1-12
• /
• 2021

Due to the Global Navigation Satellite System (GNSS) modernization, the recently launched GNSS satellites transmit signals at various frequency bands of L1, L2 and L5. Considering the Korea Positioning System (KPS) signal and other GNSS augmentation signals in the future, there is a high probability of applying more complex communication techniques to the new GNSS signals. For the reason, GNSS receivers based on flexible Software Defined Radio (SDR) concept needs to be developed to evaluate various experimental communication techniques by accessing each signal processing module in detail. In this paper, we introduce a multi-constellation (GPS/Galileo/BeiDou) multi-band (L1/L2/L5) SDR by utilizing Ettus USRP N210. The signal reception module of the developed SDR includes down-conversion, analog-to-digital conversion, signal acquisition, and tracking. The down-conversion module is designed based on the super-heterodyne method fitted for MHz sampling. The signal acquisition module performs PRN code generation and FFT operation and the signal tracking module implements delay/phase/frequency locked loops only by software. In general, it is difficult to sample entire main lobe components of L5 band signals due to their higher chipping rate compared with L1 and L2 band signals. Experiment result shows that it is possible to acquire and track the under-sampled signals by the developed SDR.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1C
• /
• pp.131-137
• /
• 2009

Binary offset carrier (BOC) signal synchronization is one of the most important steps to recover the transmitted information in global navigation satellite systems (GNSS) including Galileo and global positioning system (GPS). Generally, BOC signal synchronization is based on the correlation between the received and locally generated BOC signals. Thus, the multiple side-peaks in BOC autocorrelation are one of the main error sources in synchronizing BOC signals. Recently, a novel correlation function with reduced side-peaks was proposed for BOC signal synchronization by Julien [8]; however, Julien's correlation function not only still has the side-peaks, but also is only applicable to sine phased BOC(n, n), where n is the ratio of the pseudo random noise (PRN) code rate to 1.023 MHz. In this paper, we propose a new correlation function for BOC signal synchronization, which does not have any side-peaks and is applicable to general types of BOC signals, sine/cosine phased BOC(kn, n), where k is the ratio of a PRN chip duration to the period of a square wave sub-carrier used in BOC modulation. In addition, an efficient correlator structure is presented for generating the proposed correlation function.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.385-390
• /
• 2006

This paper examines the sampling and jitter specifications and considerations for Global Navigation Satellite Systems (GNSS) software receivers. Software radio (SWR) technologies are being used in the implementation of communication receivers in general and GNSS receivers in particular. With the advent of new GPS signals, and a range of new Galileo and GLONASS signals soon becoming available, GNSS is an application where SWR and software-defined radio (SDR) are likely to have an impact. The sampling process is critical for SWR receivers, where it occurs as close to the antenna as possible. One way to achieve this is by BandPass Sampling (BPS), which is an undersampling technique that exploits aliasing to perform downconversion. BPS enables removal of the IF stage in the radio receiver. The sampling frequency is a very important factor since it influences both receiver performance and implementation efficiency. However, the design of BPS can result in degradation of Signal-to-Noise Ratio (SNR) due to the out-of-band noise being aliased. Important to the specification of both the ADC and its clocking Phase- Locked Loop (PLL) is jitter. Contributing to the system jitter are the aperture jitter of the sample-and-hold switch at the input of ADC and the sampling-clock jitter. Aperture jitter effects have usually been modeled as additive noise, based on a sinusoidal input signal, and limits the achievable Signal-to-Noise Ratio (SNR). Jitter in the sampled signal has several sources: phase noise in the Voltage-Controlled Oscillator (VCO) within the sampling PLL, jitter introduced by variations in the period of the frequency divider used in the sampling PLL and cross-talk from the lock line running parallel to signal lines. Jitter in the sampling process directly acts to degrade the noise floor and selectivity of receiver. Choosing an appropriate VCO for a SWR system is not as simple as finding one with right oscillator frequency. Similarly, it is important to specify the right jitter performance for the ADC. In this paper, the allowable sampling frequencies are calculated and analyzed for the multiple frequency BPS software radio GNSS receivers. The SNR degradation due to jitter in a BPSK system is calculated and required jitter standard deviation allowable for each GNSS band of interest is evaluated. Furthermore, in this paper we have investigated the sources of jitter and a basic jitter budget is calculated that could assist in the design of multiple frequency SWR GNSS receivers. We examine different ADCs and PLLs available in the market and compare known performance with the calculated budget. The results obtained are therefore directly applicable to SWR GNSS receiver design.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.2
• /
• pp.107-112
• /
• 2011

Several developed countries have been developing their own satellite navigation systems, such as Europe's Galileo, China's BEIDOU, and Japan's QZSS, to cope with clock errors and signal vulnerabilities of GPS. In addition, modernization of Loran, eLoran, for GPS backup has been conducted. In Korea, a dependent navigation system has been required and for GPS backup, the need for utilization of time synchronization infrastructure through the modernization of Loran has been raised. Loran signal uses 100Khz groundwave. A significant factor limiting the ranging accuracy of the Loran signal is the ASF arising from the fact that the groundwave signal is likely to propagate over paths of varying conductivity and topography. Thus, an ASF compensation method is very important for Loran and eLoran navigation. This paper introduces the propagation delay model and then compares and analyzes the estimations from the propagation delay model and measured ASFs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.10
• /
• pp.845-849
• /
• 2013

In this paper, we design local signals to remove side-peaks in the binary offset carrier (BOC) autocorrelation. Specifically, we first investigate why local signals of the conventional schemes are applicable to either sine or cosine-phased BOC signals, and then, design local signals applicable to both sine and cosine-phased BOC signals. Finally, we obtain two partial correlations and propose a correlation function with no side-peak via a combination of the partial correlations. From numerical results, we demonstrate that the designed local signals are applicable to both sine and cosine-phased BOC signals and can remove side-peaks completely.

• Journal of Navigation and Port Research
• /
• v.37 no.3
• /
• pp.263-267
• /
• 2013

This paper describes the progress and the plan of 'Wide Area Differential GPS (WA-DGPS) Development' project supported by Korean Ministry of Oceans and Fisheries. The project develops the main algorithms of the WA-DGPS which guarantees the improved accuracy, availability, and integrity all over the Korean peninsula. After the establishment of WA-DGPS ground infrastructure system, a real-time demonstration using pseudolite installed on the ground will be conducted in the final year. Also, the development of Korean Satellite-based Augmentation System (SBAS) is expected to be started from 2014, and the algorithms and the results in the WA-DGPS project will be used in the SBAS development.

• The Korean Journal of Air & Space Law and Policy
• /
• v.35 no.3
• /
• pp.127-150
• /
• 2020

A Basic Plan for the Promotion of Space Development (hereinafter referred to as "basic plan"), which prescribes mid- and long-term policy objectives and basic direction-setting on space development every five years, is one of the matters to be deliberated by the National Space Committee. Confirmed February 2018 by the Committee, the 3rd Basic Plan has a unique matter, compared to the 2nd Basic Plan. It is to construct "Korean Positioning System(KPS)". Almost every country in the world including Korea has been relying on GPS. On the occasion of the shooting down of a Korean Air flight 007 by Soviet Russia, GPS Standard Positioning Service has been open to the world. Due to technical errors of GPS or conflict of interests between countries in international relations, however, the above Service can be interrupted at any time. Such cessation might bring extensive damage to the social, economic and security domains of every country. This is why some countries has been constructing an independent global or regional satellite navigation system: EU(Galileo), Russia(Glonass), India(NaVic), Japan(QZSS), and China(Beidou). So does South Korea. Once KPS is built, it is expected to make use of the system in various areas such as transportation, aviation, disaster, construction, defense, ocean, distribution, telecommunication, etc. For this, a pan-governmental governance is needed to be established. And this governance must be based on the law. Korea is richly experienced in developing and operating individually satellite itself, but it has little experience in the simultaneous development and operation of the satellites, ground, and users systems, such as KPS. Therefore we need to review overseas cases, in order to minimize trial and error. U.S. GPS is a classic example.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.80-80
• /
• 2016

GPS로 대표되는 위성항법시스템(GNSS : Global Navigation Satellite System)은 지구 주위를 돌면서 연속적으로 항법신호를 보내고 있다. 그 중 지구표면으로부터 반사되는 항법신호를 수신하고 해석함으로써 지구표면에 관한 정보를 취득할 수가 있다. GPS로 대표되는 항법신호는 L밴드를 사용하기 때문에 토양수분의 변화 등에 대한 반사강도의 감도가 비교적 높다고 알려져 있으며, 토양수분 측정 등에 사용할 수 있다. 뿐만 아니라 경량화, 소형화하기 쉬운 점, 능동적 마이크로웨이브 리모트센싱시스템(Active Microwave Remote Sensing System)과 달리 스스로 신호를 발사하지 않기 때문에 관측의 스텔스성(Stealth)dl 뛰어난 점 등의 장점을 가지고 있다. 또한 향후 10년 이내에 준천정위성(QZSS), Galileo, COMPAS, IRNSS 등 많은 위성항법시스템이 본격 운용되어 GPS와 함께 120기 정도의 항법위성이 항법신호를 송신할 예정이므로 이용 가능성은 크게 늘어날 것으로 기대된다.한편, 항법위성을 이용한 바이스테이틱 리모트센싱은 반사파의 강도가 상당히 미약하기 때문에 정량적 계측모델의 구축은 미미한 상태이다. 즉, 지상 타워에서의 관측, 항공기에서의 관측, 소형 위성에서의 관측 등이 수행되고 있으나, 타워관측과 같이 지상의 거의 동일한 장소를 계속적으로 관측하는 경우를 제외한 기존의 연구에서는 토지의 피복상황이나 토양수분 등의 상관관계를 제시하는 수준으로써 정량적인 계측방법은 아직 확립되어 있지 않다. 이러한 관점에서 본 연구에서는 GPS위성으로부터의 항법신호를 이용하여 지구표면에 관한 정보를 얻는 바이스테이틱 리모트센싱(Bi-static Remote Sensing) 기술을 바탕으로 육지면과 해면의 판별에 신호특성이 어떻게 유효한가를 실험적으로 밝혔다. 이러한 기술은 토양수분 측정 등 수자 원인자를 추출하는데 유용할 뿐만 아니라 수면의 고도 측정, 해상풍 산출 등에도 응용 가능하다.