• 한국항행학회논문지
• /
• 제11권2호
• /
• pp.209-216
• /
• 2007

본 논문에서는 보행 로봇의 자세 안정화 및 동적 걸음새를 구현하였다. 10개의 RC 서보모터가 로봇 관절에 사용되었고, 각 로봇의 관절은 어떤 걸음새 동작에도 충분히 움직일 수 있게 하였다. 각 관절 궤적은 3차 스플라인 보간법에 의해 생성되며, 궤적의 안정성은 로봇 모델링에 의한 ZMP(Zero Moment Point)를 이용하여 입증하였다. 또한 복잡한 구조와 표현을 피하기 위해 각 가속도를 이용한 ZMP방법을 구현 하였고, 로봇의 안정 상태를 측정하기 위해 기울기 센서와 자이로 센서가 사용되었다. 10개의 서보모터 제어, 궤적 생성, ZMP 보상, 센서 측정 등 과 같은 대부분의 계산 과정은 DSP에서 이루어지며, PC에서는 단순히 로봇의 상태, 데이터 처리 등의 모니터링에 이용하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2660-2664
• /
• 2003

In this study, the concept of autonomous mobility is applied to a medical service robot. The aim of the development of the service robot is for the elderly assisting walking rehabilitation. This study aims that the service robot design parameter is proposed in ergonomic view. The walking assistant path pattern is derived from analyzing the elderly gait analysis. A lever is installed in the AMR in order to measure the pulling force and the leading force of the elderly. A lever mechanism is applied for walking assistant service of the AMR. This lever is designed for measuring the leading force of the elderly. The elderly adjusts the velocity of the robot by applying force to the lever. The action scope and the service mechanism of the robot are developed for considering and analyzing the elderly action patterns. The ergonomic design parameters, that is, dimensions, action scope and working space are determined based on the elderly moving scope. The gait information is acquired by measuring the guide lever force by load cells and working pattern by the electromyography signal.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.446-452
• /
• 2002

This paper Presents a 3-D design and a Vibration control of a new walking R.G.O.(Robotic Gait Orthosis) and would like to develop a simulation by this walking system. The vibration control and evaluation of the new knee joint mechanism on the biped walking R.G.O.(Robotic Gait Orthosis) was a very unique system and was to obtain by the 3-axis accelerometer with a low frequency vibration for the paraplegia It will be expect that the spinal cord injury patients are able to recover effectively by a biped walking R.G.O.. The new knee joint system of both legs were adopted with a good kinematic characteristics. It was designed attached a DC-srevo motor and controller, with a human wear type. It was able to accomodate itself to a environments of S.C.I. Patients. It will be expect that the spinal cord injury patients are able to recover effectively by a new walking R.G.O. system.

• 융합신호처리학회논문지
• /
• 제24권2호
• /
• pp.126-133
• /
• 2023

고령화의 심화, 사회참여 욕구의 확대, 삶의 질 향상과 관련하여 장애인과 고령자를 위한 재활 로봇에 대한 관심이 커지고 있다. 최근 고령 및 장애 인구의 증가와 함께 간병인 또는 보호자의 감소 추세에 따라 더 관심이 증대되고 있다. 이에 이러한 변화에 맞는 경제적이면서도 효율적인 재활훈련이 가능한 능동형 보행훈련 로봇의 개발이 요구된다. 이에 본 연구에서는 두 다리의 관절을 움직이는 근육 6 부위에서 근전도를 획득하고, 이를 분석하여 개인의 근육 상태를 고려하여 보행 재활이 가능한 운동 로봇 시스템을 제안하였다. 이를 통하여 단순히 자동으로 보행 운동이 제공될 때 환자의 의지가 반영되지 않아 운동의 효과가 낮아지는 것을 방지할 수 있도록 시스템을 구성하였다. 개발된 시스템의 평가 결과 본 연구를 통해 제작된 보행 재활 로봇 시스템이 설계 요구사항에 적합한 성능을 갖추었음을 확인할 수 있었으며, 사용성 평가에서도 종합적으로 만족스러운 것으로 확인되었다. 본 연구의 결과는 보행 재활에 어려움을 겪고 있는 환자들에게 큰 도움이 될 것으로 생각되며, 근전도 신호 기반 보행 로봇 시스템 개발에 도움이 될 것으로 판단된다.

• 전기학회논문지
• /
• 제65권4호
• /
• pp.673-677
• /
• 2016

In this study, In order to measure foot pressure, it makes analyzing device using multi-pressure sensor. This device was limited frequency band to 5Hz by using low-pass filter and MCU was detected signal every milliseconds. After wearing the device, the result was confirmed by blue-tooth to measure wirelessly. Also, we propose an algorithm to obtain the walking pattern using a time table in each of the detected peak from the pressure sensor. Using the algorithm, right walking pattern and abnormal pattern was detected. The results can be reflected more individual walking patterns than when using a conventional methods and also, developed device was no restriction on the human activity.

• International journal of advanced smart convergence
• /
• 제1권1호
• /
• pp.48-51
• /
• 2012

The conventional method for filtering force plate data, low-pass filtering, does not always give accurate results when applied to force data from a custom-made, instrumented treadmill. Therefore, this study compares low-pass filtered data to the same data passed through a wavelet filter. We collected data with the treadmill running. However these include motor noise with ground reaction force at two force plates. We found that he proposed wavelet method eliminated motor noise to result in more accurate force plate data than the conventional low-pass filter, particularly at high speed motor operation. In this study we suggested the convolution wavelet (CNW) which was compared to that of a low-pass filter. The CNW showed better performance as compared to band-pass filtering particularly for low signal-to-noise ratios, and a lower computational load.

• 센서학회지
• /
• 제19권4호
• /
• pp.278-284
• /
• 2010

Indoor localization for pedestrian is the key technology for caring the elderly, the visually impaired and the handicapped in health care districts. It also becomes essential for the emergency responders where the GPS signal is not available. This paper presents newly developed pedestrian localization system using the gyro sensors, the magnetic compass and pressure sensors. Instead of using the accelerometer, the pedestrian gait is estimated from the gyro sensor measurements and the travel distance is estimated based on the gait kinematics. Fusing the gyro information and the magnetic compass information for heading angle estimation is presented with the error covariance analysis. A pressure sensor is used to identify the floor the pedestrian is walking on. A complete ambulatory system is implemented which estimates the pedestrian's 3D position and the heading.

• 전기전자학회논문지
• /
• 제16권3호
• /
• pp.235-243
• /
• 2012

In this study, we developed two legged multi-joint robot by using wireless servo motor that was applied by wireless sensor network technology, which is widely used recently, and performed an experiment of walking method of two legged multi-joint robot. We constructed the star network with servo motors which were used at each joint of two-legged robot. And we designed the robot for operation by transmission of joint control signal from main control system or by transmission of the status of each joint to the main control system, so it operates with continuously checking the status of joints at same time. We developed the humanoid robot by using wireless digital servo motor which is different from existing servo motor control system, and controlled it by transmitting the information of angles and speeds of robot joints to the motor(node) as a feedback through main control system after connecting power and setting up the IDs to each joint. We solved noisy problem generated from wire and wire length to connection point of the control device by construction of the wireless network instead of using existing control method of wiring, and also solved problem of poor real time response to gait motion by controlling the position with continuous transmission of control signals to each joint. And we found that the effective control of robot is able by performing the simulation on walking motion in advance with the developed control algorithm which was downloaded into installed memory. Also we performed the stable walking with two-legged robot by attaching pressure sensor to robot sole. And we examined the robot gait operated by application of calculated algorithm on robot movement to each joint. In this study, we studied the method of controlling robot gait motion by using wireless servo motors and measured the torque applied to each joint, and found that the developed wireless servo motor by ZigBee sensor network offers easier control of two legged robot gait and better circuit configuration of it than the existing wired control system could do.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.869-870
• /
• 2006

In this study, we proposed an algorithm which can detect the walking event in hemiplegic patient using three axis acceleration signal. Twenty hemiplegic patients were participated in an experiment on a level corridor. To evaluate the accuracy, we compared the time difference between the detected event and signal from FSR-Sensor. Consequently, the mean difference of 46.1ms was obtained and it suggests that the proposed method is effective to detect the walking event in hemiplegic patient. In future, these results could be used to evaluate the walking ability in hemiplegic patient in clinical practice.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.989-990
• /
• 2009