• Steel and Composite Structures
• /
• v.31 no.4
• /
• pp.361-372
• /
• 2019

In recent years, considerable attention has been paid to the research and development of high-strength steel plates, with particular emphasis on the enhancement of the seismic resistance of buildings and bridges. Many efforts have also been undertaken to improve the properties of high-strength bolts and weld materials. However, there are still different opinions on steel joints that combine high-strength bolts and fillet welds. Therefore, it is necessary to verify the design specifications and guidelines, especially for newly developed 1,400-MPa high-strength bolts, 570-MPa steel plates, and weld materials. This paper presents the results of literature reviews and experimental investigations. Test parameters include bolt strengths, weld orientations, and their combinations. The results show that advances in steel materials have increased the plastic deformation capacities of steel welds. That allows combination joints to gain their maximum strength before the welds have fracture failures. When in combination with longitudinal welds, high-strength bolts slip, come in contact with cover plates, and develop greater bearing strength before the joints reach their maximum strength. However, in the case of combinations with transverse welds, changes in crack angles cause the welds to provide additional strength. The combination joints can therefore develop strength greater than estimated by adding the strength of bolted joints in proportion to those of welded joints. Consequently, using the slip resistance as the available strength of high-strength bolts is recommended. That ensures a margin of safety in the strength design of combination joints.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.5
• /
• pp.90-95
• /
• 2019

This study aims to gain the design data through the process design of the organic Rankine cycle, which can produce 250kW of electric power through waste heat recovery. In this study, a simulation was conducted using APSEN HYSYS to make the model for the process design of the 250kW-class waste heat recovery system. For the thermodynamic model, the test was conducted with hot water as the heat source, the water steam as the cooling water for the cooler, and the refrigerant R245FA in the cycle. In the final design, it was expected and found from the simulation that the cycle efficiency was 12.62% and that 250kW of power was produced considering the margin of 80%.

• Journal of Periodontal and Implant Science
• /
• v.49 no.6
• /
• pp.355-365
• /
• 2019

Purpose: The modified minimally invasive surgical technique (M-MIST) has been successfully employed to achieve periodontal regeneration. Platelet-rich fibrin (PRF) is known to enhance wound healing through the release of growth factors. This study aimed to observe the outcomes of periodontal surgery when M-MIST was used with or without PRF for the treatment of isolated intrabony defects. Methods: This randomized clinical trial was conducted on 36 systemically healthy patients, who had chronic periodontitis associated with a single-site buccal probing pocket depth (PPD) and clinical attachment level of ≥5 mm. Patients were randomly divided into 2 groups: the test group treated with M-MIST and PRF, and the control group treated with M-MIST alone. The primary periodontal parameters analyzed were PPD, relative attachment level (RAL), and relative gingival margin level. The radiographic parameters analyzed were change in alveolar crest position (C-ACP), linear bone growth (LBG), and percentage bone fill (%BF). Patients were followed up to 6 months post-surgery. Results: Intragroup comparisons at 3 and 6 months showed consistently significant improvements in PPD and RAL in both the groups. In intergroup comparisons, the improvement in PPD reduction, gain in RAL, and the level of the gingival margin was similar in both groups at 3 and 6 months of follow-up. Furthermore, an intergroup comparison of radiographic parameters also demonstrated similar improvements in C-ACP, LBG, and %BF at 6 months of follow-up. Conclusions: M-MIST with or without PRF yielded comparable periodontal tissue healing in terms of improvements in periodontal and radiographic parameters. Further investigation is required to confirm the beneficial effects of PRF with M-MIST.