• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.1037-1044
• /
• 2000

The objective of this study is the preparation of activated carbon for BAC(biological activated carbon). Prepared activated carbon was measured iodine adsorption(mg/g). methylene blue adsorption(mg/g), B.E.T($m^2/g$), PSD(Pore Size Distribution) and 'Picabiol' which in commercial activated carbon for BAC. Activation method for this study was a chemical activation used the phosphoric acid. In the method, two important factors affected activation characterized in preparation were temperature and impregnated phosphoric acid concentration. Activation temperature and impregnated phosphoric acid concentration were changed the $600{\sim}800^{\circ}C$ and 35~50wt% respectively. Activation time was fixed for 3 hour. Optimal activation temperature was $800^{\circ}C$ and impregnated phosphoric acid concentrations was about 50wt%. By the above condition specific surface area, iodine adsorption number and methylene blue adsorption number resulted $1643.3m^2/g$, 1093 mg/g, 445.6 mg/g, respectively.

• Applied Biological Chemistry
• /
• v.30 no.1
• /
• pp.46-53
• /
• 1987

For the effective utilization of Korean Crnciferal seeds, the chemical characteristics, lipid composition and amino acid composition were analysed in six kinds. The content of crude lipid was 39.1% to 46.5% in Korean Cruciferal seeds. The iodine value, saponification value and acid value were 93.4 to 107.2, 170.4 to 185.0 and 0.7 to 1.2 in Cruciferal seed oils, respectively. The content of neutral lipids was 95.3% to 96.4% to total lipid, while that of compound lipids was 3.6% to 4.2%. The content of erucic acid teas 33.4% to 51.5% to total fatty acid in Gerg-gac, Chin-ju Daepung, Seoul-cabbage, and that of Mok-po 71 was only 0.8%. The content of erucic acid was decreased with increasing amount of oleic acid, Among the amino acid in defatted seed meals, glutamic acid, leucine, lysine, arginine and proline showed high quantity and the sum of these amino acids occupied 50% to total amino acid. While cystine and methionine were poor in content.

• Analytical Science and Technology
• /
• v.19 no.4
• /
• pp.290-300
• /
• 2006

Disinfection by-products(DBPs), such as volatile trihalomethanes and the nonvolatile organochlorine acids, created by chlorination have been extensively studied. However MX which contributes 20-50% of the mutagenic activity in drinking water began to people's attention since 1990. Its chemical name is 3-chloro-4-dichloromethyl-5-hydroxy-2(5H)-furanone. According to WHO guidelines its concentration should be controlled, but its value has not been set up. Due to analytical difficulties in measuring this compound at such a low concentrations and lack of information on toxicity to human. Because concentration (ng/L) of MX in drinking water is low traditional testing methods are ineffective. Therefore this study compared LLE and SPE and have chosen SPE to improve preconcentration. MX has been identified in chlorinated drinking water samples in several countries but not in korea Therefore this study analyzed concentration of MX in different water sources and in spring water. This study examined the causes of changing MX content. Chlorine dosage, seasons, water temperature and distance from the source was all discoverd to be relavant. MX was analyzed in various treatment to find optimum disinfection methods. The outcome was that the concentration of MX was minimized when using biological activated carbon-O3 and granular activated carbon.

• The korean journal of orthodontics
• /
• v.29 no.5 s.76
• /
• pp.551-562
• /
• 1999

This study was undertaken to investigate the relation between orthodontic force magnitude and the amount of tooth movement. And more light force application for reducing root resorption Twenty-four rats were divided into three experimental groups(A, B, C) based on force magnitude and application method. Springs of 50g force were applied to A group, springs of 100g force were applied to B group and springs of 25g force were applied to C group initially, and after 4 days springs of C group were changed to springs of 50g force. Two kinds of $sentally^{(R)}$(GAC U.S.A.) closed coil spring, 50g and 100g, were used. And we made 25g springs by heat treatment process of 50g springs. Each spring was inserted between the maxillary central incisor and the maxillary left first molar. Amounts of tooth movement were measured everyday by digital caliper($Digimatic^{(R)}$, Mitutoyo, Japan) under inhalation anesthesia for 15 days. After 15 days, all rats were sacrificed and histological samples were obtained with Hematoxyline-Eosin stain and Masson's trichrome stain. Following conclusion were made; 1. Group B showed the mean cumulative tooth movement of $2.19{\pm}0.41mm$ at 15th day, which was greatest among three groups, followed by group C($2.06{\pm}0.10mm$), group A($1.90{\pm}0.49mm$) respectively. however, there was no statistically difference among three groups. 2. All groups showed general tooth movement pattern and A, B, C group finished lag phase at 9th, 8th, 7th day, but there was no statistical significance. 3. Group A,B,C showed root resorption and especially group B showed the most severe root resorption and group C showed milder root resorption than other groups. According to the above results, large initial force with the development of a flirty widespread hyalinized zone may cause severe root resorption, so initial force should be applied lightly to reduce hyalinized area and eventually root resorption and then increased force will induce efficient tooth movement.

• Tuberculosis and Respiratory Diseases
• /
• v.55 no.1
• /
• pp.41-58
• /
• 2003

Background : The resurgence of tuberculosis and the widespread emergence of multidrug-resistant M. tuberculosis have emphasized the importance of rapid and accurate diagnostic procedures. Recently, the oligonucleotide chip has proven to be a useful tool in the rapid diagnosis of infectious diseases. The purpose of this study was to rapidly and accurately detect specific mutations in the rpoB, katG and rpsL genes associated with rifampin, isoniazid and streptomycin resistance in M. tuberculosis, respectively, using a single oligonucleotide chip. Method : For detection of drug-resistance, 7 wild-type and 13 mutant-type probes for rifampin, 2 wild-type and 3 mutant-type probes for isoniazid, and 2 wild-type and 2 mutant-type probes for streptomycin were designed and spotted onto glass slides. Fifty-five cultured samples of M. tuberculosis were amplified by PCR, and then underwent hybridization and scanning. Direct sequencing was done to verify the results from the oligonucleotide chip and to analyze the types of mutations. Result : Thirty-five cases out of 40 rifampin-resistant strains(~88%) had mutations in the rpoB gene. One case had a new mutation(D516F, GAC R TTC) and another known mutation together. Twenty cases out of 42 isoniazid-resistant strains(~50%) had mutations in the katG gene, while 7 cases out of 9 streptomycin-resistant strains(~78%) had mutations in the rpsL gene. From these results, the oligonucleotide chip was confirmed to be able to detect the most frequent mutations from the genes associated with rifampin, isoniazid and streptomycin resistance. The results proved that the drug-resistance detection probes were specific. When the results from the oligonucleotide chip and DNA sequencing were compared, the types of mutations were exactly matched. Conclusion : The diagnostic oligonucleotide chip with mutation specific probes for drug resistance is a very reliable and useful tool for the rapid and accurate diagnosis of drug resistance against rifampin, isoniazid and streptomycin in M. tuberculosis infections.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.12
• /
• pp.1280-1286
• /
• 2006

Three different virgin activated carbons made of each coal(Calgon), coconut(Samchully) and wood(Picabiol) based activated carbon(AC) were tested for an adsorption performance of 1,4-dioxane in a continuous adsorption column. Breakthrough behavior was Investigated that the breakthrough points of coal, coconut and wood based AC were observed as 3600 bed volumn(BV), 1440 BV and 144 BV respectively. Adsorption capacity(X/M) of coal, coconut and wood based AC was observed. The reported results of adsorption capacity showed that coal based AC was highest(578.9 ${\mu}g/g$), coconut based AC was intermediate(142.3 ${\mu}g/g$) and wood based AC was lowest(7.4 ${\mu}g/g$) due to increasing specific surface area. Moreover, carbon usage rates(CURs) for coal, coconut and wood based AC had been shown as 0.48 g/day, 1.41 g/day and 6.9 g/day respectively. The constant characteristic of the system, k of coal based AC was found to be 91.5 and k of coconut based AC was found to be 17.9. Removal efficiencies of 1,4-dioxane with different ozonation dosages(2 and 5 mg/L) for 20 min ozonation had been shown 38% and 87% respectively. There was no observation for biological removal of 1.4-dioxane by attached micro-organisms when used(3.1 years and over 5 years) biological activated carbon(BAC) without pretreatment of oxidation were employed. When a combination of ozonation(2 mg/L and 5 mg/L) and BAC process for $10{\sim}30$ min was applied, removal efficiency for 1,4-dioxine increased only $2{\sim}6%$ compared to only applying ozonation. Therefore removal efficiency of BAC process prior to using oxidation was proven to negligible. Consequently, the results presented in this paper provide a better insight into the adsorption performance of 1,4-dioxane. This observation suggests that using virgin activated carbon made of coal is the best selection for removal of 1,4-dioxane in the water treatment for an advanced treatment. It is clear from this research that longer EBCT for ozonation or higher ozone concentration are more effective operation methods for removal of 1,4-dioxane than longer EBCT in the BAC process.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.6
• /
• pp.853-869
• /
• 2000

Background : Following several decades of decline, the incidence of tuberculosis has recent1y begun to increase in many countries of this the control of this disease has been impeded by the emergence of multi-drug resistant tuberculosis (MDR-TB). The development of rapid diagnostic methods and effective new drugs are needed to control MDR-TB. One of the new drugs for MDR-TB is rifabutin (RBU) which has been known to be effective in some patients with MDR-TB. A few reports showed that some types of mutations of the rpoB gene, which were known to be present in 96-98% of rifampicin-resistant M. tuberculosis, were associated with the rifampicin-resistant but RBU-susceptible phenotype. This study was performed to investigate the correlation between RBU susceptibility and the patterns of rpoB gene mutations in Korean MDR-TB. Methods : Sixty-five clinical isolates of multi-drug resistant Mycobacterium tuberculosis, gathered from patients who visited the Asan Medical Center from July 1997 to June 1999, were investigated. Clinical responses to rifabutin-containing regimen were evaluated. An RBU susceptibility test and sequencing analysis of rpoB gene were performed, and the results were analyzed to confirm which mutations correlated with RBU-susceptible MDR-TB. Results : Fifty-three of 56 (95%) clinical isolates of MDR-TB had 60 mutations of the rpoB gene. The most frequent mutations were found at codon 531 (43%), and two mutations were combined in seven clinical isolates. Five of 53 (10%) clinical isolates showed the RBU-susceptible phenotype, and in them the characteristic patterns of point mutations were found at codon 509, 516, and 526. Conclusion : The frequency and pattern of mutations of the rpoB gene of Korean MDR-TB isolates were similar to those in western countries, where the prevalence of tuberculosis is low, but some show RBU-susceptible phenotypes. RBU-susceptible MDR-TB isolates showed the characteristic pattern of mutations of the rpoB gene which could be used to rapidly diagnose RBU susceptibility.