• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.355-356
• /
• 2015

This paper proposes a control strategy of total output power ripple cancellation for both of Machine-Side Converter (MSC) and Grid-Side Converter (GSC) in a DFIG under unbalanced grid conditions. The proposed control strategy for the MSC is the zero torque ripple control algorithm with an enhanced LVRT capability. The control algorithm for the MSC exhibits reduced torque pulsation in steady-state unbalanced grid conditions. In addition, this control algorithm also minimizes a peak value of rotor current in transient unbalanced grid conditions. The total output power ripple cancellation control algorithm is adopted in the GSC. The total output power ripple cancellation is achieved by nullifying the oscillating component of the total output active and reactive power at the summing point of stator and rotor of DFIG. The proposed control strategy for the GSC reduces the output power oscillation leading to the improved quality of wind farms output.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.4
• /
• pp.107-118
• /
• 2002

The purpose of this study is to investigate the strengthening effect of RC beams with carbon fiber grid. Carbon fiber grid that is very lightweight and stronger than steel reinforcement does not rust or corrode and has a very high resistance to salt. In this study, five real size specimens which are strengthened with different types of carbon fiber grid are tested. With the results of this tests, we found the physical and mechanical properties of carbon fiber grid and polymer mortar which are used to strengthen the damaged or cracked reinforcement concrete beams. we also investigate the strengthening effect of carbon fiber grid on the five flexural test specimens that have cracks.

• Journal of Applied Reliability
• /
• v.17 no.4
• /
• pp.343-354
• /
• 2017

Purpose: This paper evaluates the reliability of tapered grid couplings and presents test results through performance and life tests. Methods: The performance and life test method were presented by analyzing the failure modes for the tapered grid coupling. Zero failure test time was calculated to evaluate the reliability of tapered grid couplings and the test was performed under accelerated conditions. The nondestructive test and wear analysis using weighing were also carried out to check the failure modes of the field conditions. Conclusion: This study can be provided to improve the product reliability through failure analysis of a tapered grid coupling. The performance test results of before and after the accelerated life test were presented to confirm the improved reliability of the tapered grid coupling.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.06a
• /
• pp.203-206
• /
• 2011

차세대 전력망인 Smart Grid는 에너지 효율성을 높이기 위한 대안이다. 현재 Smart Grid는 빠른 진행 속도에 비해 보안상 취약점을 다수 내포하고 있다. 이에 Smart Grid의 보안 취약점들을 분석하고, 취약점들에 대한 대응책을 마련하기 위한 방법을 연구하며, 그에 따른 보안 정책을 개발하여, 이들을 저장하여 보안 DB를 구축하고, 보안 시스템을 개발하여 지능적 취약점 DB 보안 시스템을 작동 시킬 수 있는 방법을 연구하여 다가올 보안 위협에 대응 할 수 있도록 하여 Smart Grid 시대의 발전에 기여 할 것이다.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.380-381
• /
• 2019

This paper presents a grid voltage-sensorless current control design for an LCL-filtered grid-connected inverter with the purpose of enhancing the reliability and reducing the total cost of system. A disturbance observer based on the gradient steepest descent method is adopted to estimate the grid voltages with high accuracy and light computational burden even under distorted grid conditions. The grid fundamental components are effectively extracted from the estimated gird voltages by means of a least-squares algorithm to facilitate the synchronization process without using the conventional phase-locked loop. Finally, the estimated states of inverter system obtained by a discrete current-type full state observer are utilized in the state feedback current controller to realize a stable voltage-sensorless current control scheme. The effectiveness of the proposed scheme is validated through the simulation results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.4
• /
• pp.294-297
• /
• 2021

A grid voltage estimation method for modular plug-in active power decoupling (APD) circuits is proposed in this study as direct replacements of electrolytic capacitors. Since modular plug-in APD circuits cannot have additional grid voltage sensors and should be operated independently without information exchange with the front-end converter, it is impossible to obtain the phase information of the grid directly. Therefore, the proposed method uses the second-order harmonic component of the DC-link voltage to estimate the grid voltage necessary to control the APD circuit. By employing the proposed method, the concept of modular plug-in APD circuits can be realized and implemented without direct detection of the grid voltage. The experimental results based on hardware-in-the-loop simulation (HILS) validate the effectiveness of the proposed control method.

• International journal of advanced smart convergence
• /
• v.12 no.3
• /
• pp.127-140
• /
• 2023

While tools exist for blind people to understand shapes, these are not commercially available nor affordable and often require the assistance of sighted people. Thus, we designed two low-cost grid-based tactile tools using toggle buttons (TogGrid) and cotton balls (CottonGrid). To assess the potential of these as an educational tool, we conducted a user study with 12 people with visual impairments where they were asked to understand and reproduce shapes under different conditions. Although CottonGrid is relatively cheap and easy to make, findings show that TogGrid was perceived to be better in terms of perceived easiness, task completion time, accuracy, and preference in general. Particularly, participants valued TogGrid for enabling them to identify and correct errors. Based on the findings, we provide implications for utilizing toggle buttons for designing educational instruments for learning and expressing shapes for blind people.

• 한국전산유체공학회:학술대회논문집
• /
• 2001.10a
• /
• pp.174-181
• /
• 2001

The Gird is a communication service that collaborates dispersed high performance computers, large-scale databases and modern equipments so that those can be shared and worked together. In this paper. CFD research based on National Grid project is discussed. To validate the Grid technology, the flow past ONERA M6 wing and the flow past infinite wing are simulated on the National Grid testbed.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.272-276
• /
• 1999

The present paper proposes design and manufacturing methods of the carbon/epoxy square grid structure with near zero-CTE in three geometrical principal directions. Bonding strength of the grid structure is examined for different bonding methods. Numerical examples show that maximum displacement of the composite grid structure is almost zero comparing with that of aluminum grid structure with same dimension under thermal loading.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.170-175
• /
• 1999

Noncontact measuring methodology of 3-dimensional profile using CCD camera are very attractive because of it's high measuring speed and its's high sensitivity. Especially, when projecting a grid pattern over the object the captured image have 3 dimensional information of the object. Projection moire extract 3-D information with another grid pattern in front of CCD camera. However phase measuring profilometry(PMP) obtain similar results without additional grid pattern. In this paper, new method for grid pattern generation system by polygonal mirror and Laser Diode. This system is applied the projection moire and the PMP.