• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.3
• /
• pp.65-70
• /
• 2005

Incorrect ambiguity integer of GPS make a large error on attitude determination. In this paper one method is suggested for estimating the multipath of GPS carrier measurement while attitude determination. The multi-antenna system consists of 4 antennas have the same clock error help to make attitude determination effectively. If the distance between antennas is a half wavelength, it is not necessary to search the ambiguity integer and the multipath of GPS carrier measurement can be estimated. The results of the simulation are shown and analyzed.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.1 s.19
• /
• pp.51-57
• /
• 2002

GPS proved to very practical in the application of geodesy and surveying such Civil Engineering, control point surveying and the deformation surveying o( structure, but the accuracy of static GPS positioning is degraded at the sites which the visible satellites of GPS are less than 4, i.e. the urban area covered with the high building and the industrial zone. Thus, the combined GPS/GLONASS system was introduced to acquire the high accuracy of static positioning by a few satellites. So the combined GPS/GLONASS system show the good results at the sites which the accuracy of positioning is degraded due to few satellites, the cutoff of signal, and multipath in the urban area.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.237-241
• /
• 2008

Femtocells are cellular access points that connect to a mobile operator's network using residential DSL or cable broadband connections. They have been developed to work with a range of different cellular standards including CDMA, GSM and UMTS. Like legacy base station, the frequency accuracy and phase alignment is necessary for ensuring the quality of service (QoS) for applications such as voice, real-time video, wireless hand-off, and data over a converged access medium at the femtocell. But, the GPS has some problem to be used at the femtocell, because it is difficult to set-up, depends on the satellite condition, and very expensive. So, some techniques are discussed to alternate with the legacy GPS system. NTP, PTP, Synchronous Ethernet use the ethernet to synchronize distributed clocks in packet networks. AGPS support reliable position information than the legacy GPS in poor signal conditions. But, These method also have some problems. So, hybrid timing method like A-GPS+PTP and TV+GPS was developed to make up the weak point of GPS. This paper introduces the each method and compare each other and y propose much better solution for timing synchronization at the Femtocell

• Korean Journal of Geomatics
• /
• v.2 no.1
• /
• pp.17-24
• /
• 2002

The Global Positioning System technology has been widely used in positioning and attitude determination. It is well known that the accuracy, availability and reliability of the positioning results are heavily dependent on the number and geometric distribution of tracked GPS satellites. Because of this limitation, in some situations, such as in urban canyons, underground or inside of buildings, it is difficult to navigate with GPS receiver. Therefore, in order to improve the performance of satellite-based positioning, the integration of GPS with the pseudolite technology has been proposed. With this pseudolite technology, it is expected that seamless positioning service can be provided in a wider area without replacing existing GPS receivers. On the other hand, to adopt pseudolites on a larger scale, it is necessary to verify how the pseudolites may complement the existing GPS-based positioning. In this paper the authors present the details of the experiments and the results of the fundamental verification for seamless positioning using integration of GPS and pseudolite. This paper shows that the accuracy and efficiency of integrating GPS and pseudolite through the dynamic and static positioning experiment. The influence of pseudolite signal on GPS receiver is also discussed. The experimental results indicate that the accuracy of the height component can indeed be significantly improved, to approximately the same level as the horizontal component.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.5
• /
• pp.479-484
• /
• 2010

In the airborne laser survey with GPS/INS, based on kinematic, the installation and operation of GPS base stations is necessary to allow three-dimensional location coordinates to be obtained quickly and precisely. However, in many cases, GPS base stations operate under difficult conditions. In this paper, we investigate the substitutability of continuously operating reference stations (CORS) for base stations, and we examine the influence of the distance between aircraft GPS and CORS on the Z-value. The results of our study demonstrate that, if the performance of GPS base stations within regulation distance is replaced with that of CORS, sufficient accuracy is guaranteed. Moreover, the performance of CORS beyond regulation distance is fairly good.

• Journal of Advanced Navigation Technology
• /
• v.14 no.6
• /
• pp.783-790
• /
• 2010

For safety navigation of ships at sea, ships monitor their location obtained from Global Positioning Satellite System (GNSS). In this study, we computed near-real-time positions of a ship at sea using GPS Precise Point Positioning (PPP) technique and analyzed precision of the near-real-time positions. We conducted ship borne GPS observations in the south sea of Korea. To process the GPS data using PPP technique, GIPSY-OASIS (GPS Inferred Positioning System-Orbit Analysis and Simulation Software) developed by the Jet Propulsion Laboratory was used. Antenna phase center variations, ocean tidal loading displacements, and azimuthal gradients of the atmosphere were corrected or estimated as standard procedures of high-precision GIPSY-OASIS data processing. As a result, the precisions of near-real-time positions was ~1cm.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.10
• /
• pp.439-446
• /
• 2015

Recently, semantic trajectories which combine GPS positions and POIs(Point of Interests) become more popular in order to expand location based services. To construct semantic trajectories, the existing algorithms exploit the extent information of POIs described as polygons and find overlapping regions between GPS positions and the extents. However, the algorithms are not applicable in the condition where the extent information is not provided such as in Google Map, Naver Map, OpenStreetMap and most of the open geographic information systems. In this paper, we provide a novel algorithm to construct semantic trajectories only with GPS positions and POI points but without POI extents.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1915-1916
• /
• 2006

Recently, for positioning a train and synchronizing between equipments in railway environment, the utilization of GPS(Global Positioning System) is increasing. But, the defects of GPS are pointed out. The risk of dependence on only GPS is not neglectable. Therefore, we prepare the implementation of the future railway system through the research on the safety and reliability of applying GPS to railway system.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.440-442
• /
• 2006

This rarer is to design a low cost GPS/DGPS receiver using GP2021 correlator. By modifying the existent GPS, the performance can be enhance than before. The H/W and S/W should be updated to have good result.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.884-887
• /
• 1996

This paper describes a GPS/DR integration filter for a car navigation system. A new GPS/DR integration filter is derived for obtaining more accurate and reliable position data. The covariance analysis results and simulation results are shown for evaluating the performance of the proposed GPS/DR integration filter.