• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.267-275
• /
• 2013

EKF has been widely used for GPS/INS integration as standard method but EKF has one well-known drawback. if the errors are not within the bounded region, the filter may be divergent. The particle filter has the advantage of the nonlinear and non-gaussian system. This paper proposes a method for compensating the GPS position errors based on the particle filter and presents loosely-coupled GPS/INS integration using proposed algorithm. We used GPS position pattern with particle filter and added attitude kalman filter for improving attitude accuracy. To verify the performance, the proposed method is compared with high cost GPS as reference. In the experimental result, we verified that the accuracy and robust were well improved by the proposed method filter effectively and robustness than by original loosely-coupled integration when vehicle turns at corner.

• The Journal of Korea Robotics Society
• /
• v.6 no.1
• /
• pp.58-68
• /
• 2011

This paper proposes a technique of indoor localization for mobile robot by so called indoor GPS and EKF. Basically the concept of indoor GPS is similar outdoor GPS, and the indoor GPS gets distances between Anchors and Tag by a ranging method of CSS and then estimates the coordinate by distances and known Anchor positions. After we performed performance test of indoor GPS system in ideal and multipath environment, we configured that the indoor GPS has internal error factors and external error factors. This paper handled a multipath problem belonging to external error factors. At first various direct physical method are introduced to fix the multipath problems, and as expected we got errors corrected considerably. And then the method of selective anchors for indoor GPS is applied. With these two level improvement of indoor GPS performance, EKF(Extended Kalman Filter) is applied to mobile robot in indoor environment. The usefulness of the proposed methods are shown by a series of experiments in a environment giving contaminated data by multipath.

• Journal of Astronomy and Space Sciences
• /
• v.27 no.2
• /
• pp.173-180
• /
• 2010

As a preparatory study for Global Positioning System-Very Long Baseline Interferometry (GPS-VLBI) hybrid system, we examined if VLBI type observation of the GPS signal is realizable through a test experiment. The test experiment was performed between Kashima and Koganei, Japan, with 110 km baseline. The GPS L1 and L2 signals were received by commercial GPS antennas, down-converted to video-band signals by specially developed GPS down converters, and then sampled by VLBI samplers. The sampled GPS data were recorded as ordinary VLBI data by VLBI recorders. The sampling frequency was 64 MHz and the observation time was 1 minute. The recorded data were correlated by a VLBI correlator. From correlation results, we simultaneously obtained correlation fringes from all 8 satellites above a cut-off elevation which was set to 15 degree. 87.5% of L1 fringes and 12.5% of L2 fringes acquired the Signal to Noise Ratios which are sufficient to achieve the group delay precision of 0.1nsec that is typical in current geodetic VLBI. This result shows that VLBI type observation of GPS satellites will be readily realized in future GPS-VLBI hybrid system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.5
• /
• pp.201-208
• /
• 1993

The emergence of the Global Positioning System(GPS) with its benefits of speed and economy now offers an opportunity to analyse, strengthen, densify and constitute the control network, in addition to providing mapping, cadastral and engineering control under the unfavorable conditions. This research aims at the using of GPS compared to conventional geodetic positioning techniques in Korean primary control networks. A GPS test network of 10km baselines, which is measured and analysed by Wild GPS-System 200, are compared to the distances from EDM and official coordinates, and relative GPS heights are transformed to the height differences on the mean sea level. The results of this study confirms that using GPS merely as a new type of instrument is the most powerful method for the densification of the control points retaining existing networks and existing computational procedures.

• Journal of Korea Spatial Information System Society
• /
• v.4 no.1 s.7
• /
• pp.27-37
• /
• 2002

Ideas providing an optimal car route using current traffic condition, maintaining the current location and the history of driven route of a car in the main central office, in where GPS signals transmitted from the driving cars are received, have been proposed. Since GPS signals occurred in certain time interval instead of all GPS signals are transmitted from the car due to the cost of transmission, an algorithm that is able to recover the missing GPS signals is required. In this paper, an efficient algorithm, which finds the driven route and the current location of a car fast, is proposed. To verify the efficiency of the proposed algorithm, it is applied to the various real GIS map and it turns out to be very effective.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.186-186
• /
• 2000

In the GPS/DR integrated system, the GPS position(or velocity) is used to compensate the DR output and to calibrate errors in the DR sensor. This synergistic relationship ensures that the calibrated DR accuracy can be maintained even when the GPS signal is blocked. Because of the observability problem, however, the DR sensors are not sufficiently calibrated when the vehicle speed is low. This problem can be solved if we use a multi-antenna GPS receiver for attitude determination instead of conventional one. This paper designs a two-antenna GPS receiver integrated with DR sensors. The proposed integration system has three remarkable features. First, the DR sensor can be calibrated regardless of the vehicle speed with the aid of two-antenna GPS receiver. Secondly, the search space of integer ambiguities in GPS carrier-phase measurements is reduced to a part of the surface of the sphere using DR heading. Thirdly, the detection resolution of cycle-slips in GPS carrier-phase measurements is improved with the aid of DR heading. From the experimental result, it is shown that the search grace is drastically reduced to about 3120 of the non-aided case and the cycle-slips of 1 or half cycle can be detected.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.4
• /
• pp.41-50
• /
• 2007

This study aims to suggest efficient setting up of GPS (Global Positioning System) for cadastral surveying. In order to perform it effectively, worldly used modern surveying technology GPS introduced. In a practical analysis, GPS observation had been performed in the research area and the results had been compared and analysed with the results of Total Station. As a results, it is shown that GPS is more efficient rather than current surveying method in terms of time, cost and economy. The results of GPS surveying were included in the scope of error tolerance, being accepted by cadastral laws, showing high accuracy of GPS surveying method. With the results of analysis, how to application of GPS for cadastral surveying was suggested.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.1 s.31
• /
• pp.37-43
• /
• 2005

GPS has been increasingly used in high precision positioning thanks to rapid advances of GPS technology. In order to acquire precise coordinates from GPS, it is important to solve accurately integer ambiguity inherent in GPS signals. The previous methods to solve this ambiguity were mostly based on multi-epoch data but recently a method based on single-epoch data has been developed. In this study, we selected three sets of software based on these methods, applied them to GPS baseline processing, and analyzed the experimental results. From these analyses, we have also verified the potential of their uses in real time precision positioning.

• Journal of Korea Spatial Information System Society
• /
• v.2 no.2 s.4
• /
• pp.85-88
• /
• 2000

GPS/GIS Related Information Technology evolves drastically and a great quantity of spatial information is available to users who require highly qualitative spatial information services. Hence the development of GIS tools that can improve position accuracy and maintenance efficiency is required. To meet various requirements from users. we developed a GPS data processing component based on OLE/COM by utilizing GDK which is a unique domestic GIS product. Also we developed an application package that includes the GPS data processing component to implement GPS into GIS. The development of GPS data processing component will contribute toward the expansion of component-wise GIS softwares.

• Journal of Internet Computing and Services
• /
• v.12 no.2
• /
• pp.29-36
• /
• 2011

In this paper, NMEA based Parser programming for Smart-phone was designed at a GPS receiver. The design scheme for Map API and sensor web services was designed according to the Google Map API standards that the position values of NMEA sentences were changed due to XML files. As a result of interfaces between GPS NMEA sentences of Smart-phone and Google Map API, it is possible that real time visual positioning sensor web services about the Google Map mapping from a GPS receiver could be worked on web sever.