• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.3
• /
• pp.117-126
• /
• 2008

Earth geopotential models were used to determine the reference surface in geoid modelling and many global geopotential models were developed after 1980's. Nowadays, EGM96 and EIGEN-GL04C geopotential models have been most widely used in the world, but what so called EGM2008 earth geopotential model were developed in 2008 by NGA. In this paper, we intended to compare the results of spherical harmonic analyses using the three geopotential model, EGM96, EIGEN-GL04C and EGM2008. So, the spherical harmonic analyses were performed up to degree and order 360(in case of EGM2008, up to degree and order 720, 1440, 2190 in addition), on each $1'{\times}1'$grid point in and around Korean peninsula. Geometric geoid were calculated at 464 GPS/leveling points for accuracy evaluation and then the results of three geopotential models were compared to geometric geoid. The results show that the accuracy of EGM2008 is improved considerablely compared to EGM96 and EIGEN-GL04C and it is possible to calculate geoidal heights within 14cm standard deviation and 5.5cm standard deviation after LSC fitting in and around Korean peninsula using EGM2008 geopotential model.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.4
• /
• pp.373-381
• /
• 2003

This study presents the detailed methods for facilities mapping using GPS and Totalstation. From the control survey by GPS network adjustment, the level of significance fur the height value of fourth order triangulation stations used in this study was estimated about 10cm. According to the result of verification for the transformation coefficients of national coordinate, which were announced by the National Geographic Information Institute, RMSE f coordinate transformation was found out as $\pm$0.546m that can be applied to a map scale less than 1/10,000. The accuracy analysis of height determination by Totalstation for the traverse points spaced average 90m showed that RMSE came out $\pm$9mm on the basis of direct leveling, so it indicated that trigonometric leveling by Totalstation was correct comparatively. The result of accuracy analysis of GPS/RTK surveying on traverse points showed that RMSE came out $\pm$33mm in horizontal location on the basis of Totalstation's outcome and $\pm$15mm in height value on the basis of direct leveling. In the construction survey, GPS/RTK surveying is quicker and more economical than Totalstation surveying in the feasible areas of GPS surveying. but there were many impossible areas for GPS/RTK surveying by the obstacles like a building.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.55-58
• /
• 2007

This study describes a problem of the Original Bench Mark which is used currently. We calculate New Mean Sea Level(MSL) in Incheon Port using tide data for 57 months and take 8 points GPS/Leveling data in research area. We calculate orthometric height of one control point using tide data and GPS/Leveling data. After fixed the control point, we decide final orthometric heights using relative geoidal height and ellipsoidal height from GPS survey. To analysis the Original Bench Mark compares final orthometric heights with the orthometric heights in Korea height system. We get the result that the New Original Bench Mark's height is 26.7176m. It appears 3.05cm difference as the Original Bench Mark's height is 26.6871cm in Korea height system.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• v.25 no.1
• /
• pp.1-13
• /
• 1997

This paper presents a precise geoid (PNU95 Geoid) over the southern half of the Korean peninsula. The geoid using the OSU91A reference gravity model to degree and order of 167 with an integration radius of 27 km fits to the well-distributed 71 GPS data best. The RMS difference between the modeled geoid and the GPS/leveling-implied geoid is 0.15 m, and its accuracy with respect to the GPS/leveling distance is 1.1 ppm. The resulting PNU95 Geoid varies from 21.8 m at the western part of the peninsula, Kanghwa-Do, to 30.2 m at the south-eastern part. Kyungju, generally increasing eastward.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.425-427
• /
• 2006

It is quite difficult to transfer the National Height System 1985 to the island in China. In the study, one feasible and alternative way, which measures synchronally the tide variation at the island and the coast , is firstly introduced. Then, a new method is proposed. This new method combines GPS technique and Quasi-Geoid Determination technique (GQGD). It needs gravity data, GPS data, leveling data and DEM data, together with complex calculation method and the Earth gravity model. After describing the mathematical model and presenting the calculational steps, one experiment has been shown that this method is valid and can achieve accuracy up to 5 cm for the normal height, compared with the results both from the tidal observation and height approximation. Some suggestion is also given in the end.

• Korean Journal of Geomatics
• /
• v.2 no.1
• /
• pp.7-15
• /
• 2002

Recent development of ultra-high and high degree Earth geopotential model opens new avenues to determine the Earth gravity field through spectral techniques to a very high accuracy and resolution. However, due to data availability, quality, and type, the performance of these new EGMs needs to be validated in regional or local scale geoid modeling. For establishing the best reference surface of geoid determination, recent geopotential models are evaluated using GPS/Leveling-derived geometric geoid and the Korean gravimetrical GEOID (KGEOID98) developed by National Geography Institute in 1998. Graphical and statistical comparisons are made for EGM96, GFZ97, PGM2000A and GPM98A models. The mean and standard deviation of difference between geometric height and geoid undulation calculated from GFZ97 are $1.9\pm{46.7}\;cm$. It is shown that the GFZ97 and the GPM98A models are better than the others in the Korean peninsula because the GFZ97 has a smaller bias. It means that the KGEOID98 needs some improvement using the GFZ97 instead of EGM96.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.942-946
• /
• 2007

The new gravity field combination models are expected to improve the knowledge of the Earth's global gravity field. This study evaluates six global gravity field models derived from gravimetry and altimetry surface data in a comparison with ground truth in South Korea. For calculating a more accurate estimate of the geoid heights from the height anomalies, the terrain corrections due to the terrain masses over geoid have considered, the model for the topographic correction is a spherical harmonic expansion of the ETOPO2 DTM model. Geoid heights obtained from GPS and levelling in land area of South Korea are compared with those from the EGMs. The results show that EIGEN-CG03C EGM and EIGEN-GL04C EGM displayed the nearest results to GPS/leveling, and also confirmed the importance of terrain correction for geoid height in case of the uneven topography.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5D
• /
• pp.741-747
• /
• 2008

Nowadays, the accuracy of the geoid model has been improved through development of the combination model which was composed of traditional gravimetric geoid and geometric geoid by the GPS/leveling data in USA and Japan. It is a state of the art method in geoid modeling field that what so called hybrid geoid. In this paper, as a basic study to develop Korean hybrid geoid model, we studied gravimetric geoid solutions using three gravity reduction methods (Helmert's condensation method, RTM method and Airy-isostatic method) and evaluated the usefulness of each method in context of precise geoid. The gravimetric geoid model were determined by restoring the gravity anomalies (included TC) and the indirect effects were made from various reduction methods on the EIGEN-CG03C reference field. The results are compared with respect to the geometric geoid undulation determined from 498 GPS/leveling after LSC fitting. The results showed that hybrid geoid with RTM (Residual terrain model) reduction method was most accurate method and the value of the difference compared to geometric geoid was $0.001{\pm}0.053m$.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.4
• /
• pp.385-392
• /
• 2005

This paper describes an accuracy analysis of newly developed gravimetric geoid and an improvement of developed geoid using GPS/Levelling data. We developed the KGEOID05 model corrected with the correction term. The correction term is modelled using the difference between GPS/Levelling derived geoidal heights and gravimetric geoidal heights. The stochastic model used in the calculation of correction term is the least squares collocation technique based on second-order Markov covariance function. 373 GPS stations were used to model the correction term. The standard deviation of KGEOID05 is about 11 cm and it indicates that we can be determined accurate heights ($2{\sim}3\;cm$) when we made precise modelling using KGEOID05 and a few GPS measurements for the local area.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.4
• /
• pp.67-74
• /
• 2015

GNSS/Leveling technology makes it possible to get geoidal height geometrically using GNSS and Leveling technology. GNSS/Geoid technology refers to a technology for obtaining orthometric height by subtracting geoidal height achieved by Geoid technology from ellipsoidal height achieved by GNSS technology. The purpose of this study is to verify the accuracy of the ellipsoidal height determination in order to verify the accuracy of the orthometric height determination by the GNSS/Geoid technology. For the study, a test bed was selected in Kyungnam province and GNSS Static surveying was accomplished in the test bed and then the GNSS data was processed in accordance with various analysis conditions. So, it was verified the accuracy of the ellipsoidal heights determination in accordance with the surveying conditions under the GNSS Static surveying. According to the research results, to ensure the 3cm goal accuracy of the ellipsoidal height determination, it should be surveyed by four fixed points on the survey area periphery and more than two hours of the GNSS occupation time, And also, it was found that should be limited to a baseline distance of 20km under the GNSS Static surveying.